Analysis and design of high‐frequency multiple‐output wireless power transfer system with load‐independent class‐E/F inverter
Hanxiao Wang,Yutaro Komiyama,Xiuqin Wei,Akihiro Konishi,Kien Nguyen,Hiroo Sekiya
DOI: https://doi.org/10.1002/cta.4122
IF: 2.378
2024-06-24
International Journal of Circuit Theory and Applications
Abstract:The proposed WPT system: (A) The circuit configuration; (B) The inverter waveforms. Green and red lines are overlapped with black and red lines, respectively, for vS and i2 . All lines are overlapped for vg and it; and (C) The receiver waveforms. Blue and red lines are overlapped with black and green lines, respectively, except VOn . All lines are overlapped for VOn . This paper proposes a high‐frequency multiple‐receiver wireless power transfer (WPT) system with a load‐independent class‐E/F inverter. Each receiver has a post‐regulator, which changes the equivalent resistance seen from the inverter to obtain the necessary power for output voltage regulation. Because the load‐independent class‐E/F inverter generates constant AC current ( CCAC ), the transmitter supplies the minimum required power to the receivers by the change of the equivalent resistances. Besides, the load‐independent inverter consistently achieves zero‐voltage switching (ZVS) without any control. As a result, no information feedback by wireless communication is necessary for output regulation and ZVS achievement, simplifying the system configuration and improving the transient response of the control. This paper presents analytical expressions of the proposed system. Besides, the experiment was carried out with a two‐receiver WPT system. The implemented system worked well by individual and independent output regulation of the post regulator at each receiver. The implemented WPT system achieved the power‐delivery efficiency of 83.4% at the 6.78 MHz transmission frequency and the total output power of 40 W.
engineering, electrical & electronic