Characteristics of diffuse discharges sustained by pulsed power in open air

cheng zhang,wenjin yang,tao shao,yixiao zhou,zhongsheng zhou

DOI: https://doi.org/10.1109/IPMHVC.2014.7287281

2014-01-01

Abstract:In most case, stable, relatively uniform, and large-volume plasmas in atmospheric air are desirable for various applications. Therefore, different methods are used to obtain a diffuse discharge, among which exciting power source is a key parameter. In this paper, pulsed discharges can be produced by microsecond or nanosecond pulses in open air. Two kinds of pulsed powers are applied to the HV electrode. The home-made generators can produce repetitive microsecond pulses or nanosecond pulses of up to 30 kV, respectively. The output pulse of one generator has a rise time of 300-500 ns and a full width at half maximum (FWHM) of about 6-10 μs. The output pulse of the other generator has a rise time of 70 ns and a FWHM of 100 ns. Diffuse discharges are obtained in a highly non-uniform gap in open air. Two kinds of electrode configurations are used. One type uses a commercial saw blade as high-voltage electrode, and the other type uses a series of knife blade as the HV electrode. Electrical characteristics of the diffuse discharges in open air are studied according to the voltage, current waveforms, and discharge images. Results show that diffuse discharge can be obtained with an axial distance of 30 cm and a gap spacing of 2 cm for both nanosecond pulse and microsecond pulse when the pulse repetition rate is 1 kHz. Nanosecond pulse is better for sustaining a uniform diffuse discharge than microsecond pulse excitation. In addition, the nanosecond pulse generator can provide more energy to the excitation of diffuse discharges than the microsecond pulse generator in our experiment.