Saving Electric Energy by Integrating a Photoelectrode into a Li-ion Battery

Qi Li,Na Li,Masayoshi Ishida,Haoshen Zhou

DOI: https://doi.org/10.1039/c5ta06908d

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:We here report a novel photoassisted chargeable Li-ion battery (LIB) consisting of a LiFePO4 cathode, a lithium anode and a TiO2 photoelectrode coupled with an iodide (I−) ion redox shuttle for saving electric energy.

What problem does this paper attempt to address?

Photoinduced Rechargeable Lithium-Ion Battery

Jie Wang,Yan Wang,Chaofeng Zhu,Bo Liu

DOI: https://doi.org/10.1021/acsami.1c20359

2022-01-26

Abstract:Lithium-ion battery (LIB) design is the predominant technology to power portable and mobile electric devices/equipment. Fast charging and self-powering of LIBs are significant but challenging features to be addressed for meeting the fast-paced society and emerging demands. Herein, we report a rational photorechargeable lithium-ion battery (photo-LIB) design using LiV2O5 as a photocathode by directly modifying a commercial LIB without using any additives, which works in both photoassisted fast charging and photo-only charging modes. The photo-LIB attains a high specific capacity of 185 mAh g-1 in as fast as 5 min under illumination, an enhancement of 270% referring to that in dark. Under the photo-only charging mode, the device achieves a highest full-spectrum photo-energy conversion efficiency of 9% so far, demonstrating a highly efficient self-powering mode. We reveal that the improved performance of photo-LIB is due to reversible vanadium intervalence charge transfer and Li+ insertion/deinsertion in LiV2O5 under illumination.
Intelligent dual-anode strategy for high-performance lithium-ion batteries

Chuankai Fu,Hua Huo,Yulin Ma,Liguang Wang,Geping Yin,Pengjian Zuo,Yunzhi Gao

DOI: https://doi.org/10.1016/j.device.2024.100501

2024-01-01

Device

Abstract:Achieving high energy density and a prolonged cycle life in anode materials remains a formidable challenge in the advancement of next-generation high-performance energy storage systems. Here, we introduce a novel intelligent dual-anode strategy aimed at surmounting the limitations inherent in current commercial lithium-ion batteries (LIBs) anode designs. Through harnessing the forward conduction characteristic of diodes, we effectively integrate Li-metal anode and silicon-based anode within an intelligently designed dual-anode circuit. By strategically modulating the periodically open and close status of the dual-anode circuit, full cells equipped with high-voltage LiCoO2 (LCO) cathode and SiOx&Li dual-anodes demonstrate a substantial enhancement in electrochemical performance, evidenced by a remarkable capacity retention of 92% after 500 cycles. The distinctive operational mechanism of LIBs employing intelligent dual-anode circuit is meticulously elucidated through comprehensive electrochemical testing and physical characterization. We posit that the insights gleaned from this investigation hold significant theoretical implications for the development and practical implementation of high energy density LIBs.
An organic-halide perovskite-based photo-assisted Li-ion battery for photoelectrochemical storage

Yu Chen,Zhenyu Chen,Xiang Zhang,Jinsong Chen,Yaobing Wang

DOI: https://doi.org/10.1039/d2nr02980d

IF: 6.7

2022-07-20

Nanoscale

Abstract:Merging solar energy conversion and storage into a single device would improve the utilization of solar energy. Within such a device, the photoelectrochemical material is crucially important. Herein, we design a hybrid perovskite (DAPbI) that exhibits the favorable properties of fast charge transfer and CO redox sites for steady and reversible Li + de/intercalation, and it can be used as a bifunctional cathode for an efficient photoinduced lithium-ion battery (LIB). The enhanced charge carrier lifetime of DAPbI ( τ CS/CR = 452.1/3905 ps, compared to the organic cation DAAQ where τ CS/CR = 335.7/1291 ps) for solar harvesting and conversion and its abundant reversible redox activity for energy storage lay the foundations for efficient photoelectrochemical energy conversion and storage. Using DAPbI as a cathode, an integrated photo-assisted LIB is realized, with a 0.2 V reduction in charge voltage, a 0.1 V increase in discharge voltage, enhancements of 7.4% in roundtrip efficiency and 0.5% in photoelectrochemical energy storage efficiency, and an 11.3% reduction in input power and an 18% increase in output power. This work provides a direct and sustainable strategy to utilize solar energy through electrochemical energy storage, which may support prosperous developments in this domain.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Integrating a Redox-Coupled Dye-Sensitized Photoelectrode into a Lithium–oxygen Battery for Photoassisted Charging

Mingzhe Yu,Xiaodi Ren,Lu Ma,Yiying Wu

DOI: https://doi.org/10.1038/ncomms6111

IF: 16.6

2014-01-01

Nature Communications

Abstract:With a high theoretical specific energy, the non-aqueous rechargeable lithium-oxygen battery is a promising next-generation energy storage technique. However, the large charging overpotential remains a challenge due to the difficulty in electrochemically oxidizing the insulating lithium peroxide. Recently, a redox shuttle has been introduced into the electrolyte to chemically oxidize lithium peroxide. Here, we report the use of a triiodide/iodide redox shuttle to couple a built-in dye-sensitized titanium dioxide photoelectrode with the oxygen electrode for the photoassisted charging of a lithium-oxygen battery. On charging under illumination, triiodide ions are generated on the photoelectrode, and subsequently oxidize lithium peroxide. Due to the contribution of the photovoltage, the charging overpotential is greatly reduced. The use of a redox shuttle to couple a photoelectrode and an oxygen electrode offers a unique strategy to address the overpotential issue of non-aqueous lithium-oxygen batteries and also a distinct approach for integrating solar cells and batteries.
Enhancing Lithium‐Ion Battery Performance with Photoactive LiFePO4/CsPbBr3 Quantum Dots Composite Cathodes

Can Cui,Beili Pang,Yishu Jin,Hongzheng Zhu,Hongzhou Dong,Mingwei Shang,Liyan Yu,Lifeng Dong

DOI: https://doi.org/10.1002/adfm.202414305

IF: 19

2024-09-24

Advanced Functional Materials

Abstract:A novel LiFePO4/CsPbBr3 quantum dot composite, fabricated via a facile self‐assembly process, is presented as a photocathode for lithium‐ion batteries. The composite demonstrates dual functionalities of photoelectric conversion and energy storage, resulting in significant improvements in charge/discharge capacities under simulated light conditions. The advancement of photo‐assisted lithium‐ion batteries (LIBs) relies on developing suitable photoactive Li+ storage materials and understanding their energy storage/conversion mechanisms. A novel composite material, LiFePO4/CsPbBr3 quantum dots (LFP/CPB QDs) is presented, created by embedding CPB QDs onto LFP nanoparticles. This composite exhibits dual functionalities of photoelectric conversion and storage in LIBs. Under simulated light, the composite demonstrated significant enhancements in charge and discharge capacities, with increases of 16.8% and 16.4% at 3C, respectively. Remarkably, the coulombic efficiency exceeded 100%, reaching 115.2% when charged in the dark and discharge under light. The LFP/CPB QDs cathode also maintained 93.9% capacity retention after 200 cycles at 0.5C. Analyses with synchronous‐illumination X‐ray photoelectron spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy confirmed photo‐induced charge transfer at the composite interface. Under sunlight, CPB QDs transfer photogenerated electrons to LFP, promoting the transition of Fe3+ to Fe2+ and enhancing Li+ reaction kinetics. These findings offer valuable insights for designing electrode materials for photo‐assisted battery applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Dual-functional iodine photoelectrode enabling high performance photo-assisted rechargeable lithium iodine batteries

Jingfa Li,Hongmin Liu,Kaiwen Sun,Ronghao Wang,Chengfei Qian,Feng Yu,Lei Zhang,Weizhai Bao

DOI: https://doi.org/10.1039/d2ta00258b

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:We demonstrate an integrated photo-assisted rechargeable lithium-iodine battery by using a hybrid I 2 /N719-dye/TiO 2 composite as a dual-functional photoelectrode, which could convert solar energy into electrical power and store it simultaneously.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Light‐Motivated SnO 2 /TiO 2 Heterojunctions Enabling the Breakthrough in Energy Density for Lithium‐Ion Batteries

Chen Hu,Ling Chen,Yanjie Hu,Aiping Chen,Long Chen,Hao Jiang,Chunzhong Li

DOI: https://doi.org/10.1002/adma.202103558

IF: 29.4

2021-10-08

Advanced Materials

Abstract:Powering lithium-ion batteries (LIBs) by light-irradiation will bring a paradigm shift in energy-storage technologies. Herein, a photoaccelerated rechargeable LIB employing SnO2/TiO2 heterojunction nanoarrays as a multifunctional anode is developed. The electron–hole pairs generated by the LixTiO2 (x ≥ 0) under light irradiation synergistically enhance the lithiation kinetics and electrochemical reversibility of both SnO2 and TiO2. Specifically, the electrons can quickly pour into the SnO2 and the generated Sn due to the more positive conduction band potentials (vs TiO2), and mean while the holes also promote the intercalation of Li+ into TiO2 by reaching charge balance. A remarkable increase in areal specific capacity is therefore achieved from 1.91 to 3.47 mAh cm−2 at 5 mA cm−2. More impressively, there is no capacity loss even through 100 cycles, which is the best report for photorechargeable LIBs to date, owing to the strong and stable photoresponse current. This finding exhibits a feasible pathway to break the limitation in the energy density of LIBs by the efficient conversion and storage of solar energy.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Reasonable Design and Deep Insight of Efficient Integrated Photorechargeable Li-Ion Batteries by Using a Cu/CuO/Cu2S Electrode

Meng Wei,Qiuman Zhang,Lisha Huang,Zhengtao Xue,Qiongzhi Gao,Xin Cai,Shengsen Zhang,Yueping Fang,Feng Peng,Teng Yuan,Siyuan Yang

DOI: https://doi.org/10.1021/acs.nanolett.4c02255

2024-08-21

Abstract:Herein, Cu-foam-supported CuO nanowire arrays covered with Cu2S nanosheet substrates (Cu/CuO/Cu2S) are adopted as efficient photoelectrodes for photorechargeable lithium-ion batteries (PR-LIBs). The assembled PR-LIB exhibits remarkable solar energy conversion efficiency alongside superior lithium storage capabilities. Without an electrical power supply, the photocharged PR-LIB sustained a discharge process for 63.0 h under a constant current density of 0.05 mA cm-2. The corresponding solar-to-electrical energy conversion efficiency is 4.50%, which is an impressive achievement among recently reported contemporary technologies. Mechanism investigation shows that the Cu/CuO/Cu2S photogenerated carriers augment the extraction and insertion of Li+ according to different oxidation and reduction reactions in the charging and discharging reactions. This research delineates a refined model system and proposes innovative directions for developing efficient heterojunction photoelectrodes, significantly propelling the development of PR-LIB technology.
Approaching the theoretical capacity of TiO2 anode in a photo-rechargeable lithium-ion battery

Wen Yan,Jie Wang,Qing Hu,Jingjing Fu,Mohamed K. Albolkany,Tian Zhang,Xiao Lu,Fei Ye,Bo Liu

DOI: https://doi.org/10.1007/s12274-023-6062-7

IF: 9.9

2023-09-12

Nano Research

Abstract:New generation of lithium-ion batteries (LIBs) integrating solar energy conversion and storage is emerging, as they could solve the fluctuation problem in the utilization of solar energy. Photo-rechargeable lithium-ion batteries (PR-LIBs) are ideal devices for such target, in which solar energy is converted into electricity and stored in LIB. In order to achieve the high performance of PR-LIB, it is crucial to develop dual-function electrode materials that can synergistically capture solar energy and store lithium. Herein, we present photo-rechargeable lithium-ion batteries using defective black TiO 2 as photoanode prepared by lithium reduction. The photoanode exhibits excellent photo response in full solar spectrum with a capacity enhancement of 46.4% under illumination, corresponding to the energy conversion efficiency of 4.4% at the current density of 1 A·g −1 . When illumination is applied at 20 mA·g −1 , the battery capacity increases from ∼ 230 in dark to ∼ 349 mAh·g −1 at the first cycle, and then stabilizes at 310 mAh·g −1 , approaching the theoretical value of 335 mAh·g −1 of TiO 2 electrode material. This finding provides thoughts for breaking the capacity limitations in TiO 2 and paves the way for powering LIBs by solar illumination.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
A sustainable LiFePO4/graphite hybrid cathode capable of stepwise cation and anion storage

Linlong Lyu,Jing Hu,Dongmei Lin,Haimin Yao,Limin Zhou

DOI: https://doi.org/10.1016/j.electacta.2021.138936

IF: 6.6

2021-09-01

Electrochimica Acta

Abstract:Dual ion battery (DIB) with graphite cathode is a renewable energy storage system but suffers from low capacity. Addition of lithium ion battery (LIB) cathode to graphite cathode not only facilitates capacity increment but also serves as proof-of-concept for LIB-DIB hybridization. In this study, a hybrid cathode, incorporating a physical mixture of high working potential graphite and nontoxic lithium iron phosphate (LiFePO4, LFP), is proposed and examined. The graphite interacts with anion and works as electrically conductive matrix. While additive LFP is active to cation, serving as capacity facilitator. Characterization results reveal that, during charging, the hybrid cathode starts with LFP delithiation in lower voltage region and finishes with anion intercalation in graphite at higher voltage region. During discharging, processes are reversed with stepwise anion deintercalation and cation insertion, without interfering individual constituent's proper functioning. The transfer of two polarity distinct ions inside the hybrid cathode maintains high independence, without any added kinetical difficulties. Such hybrid cathode is demonstrated to work stably with varied LFP-graphite proportions. The addition of 40 wt% LFP to graphite cathode shows doubled capacity and excellent long-term cyclability. And the hybrid cathode is also cyclable in a full cell configuration.

electrochemistry
Boosting the Cycle Life of Aprotic Li–O2 Batteries Via a Photo‐Assisted Hybrid Li2O2‐Scavenging Strategy

Yu Qiao,Yang Liu,Kezhu Jiang,Xiang Li,Yibo He,Qi Li,Shichao Wu,Haoshen Zhou

DOI: https://doi.org/10.1002/smtd.201700284

IF: 12.4

2018-01-01

Small Methods

Abstract:The development of the nonaqueous Li-O-2 battery, a promising candidate for high-gravimetric-energy-storage techniques, is seriously restrained by the high charge overpotential during electrochemical decomposition of insulating Li2O2. Benefiting from the photovoltage, photo-assisted charging is revealed as a feasible method to reduce the charge potential. However, a long period of illumination will inevitably aggravate the degradation of the electrolyte. Herein, composed of contact-ion-pairs (CIPs), a newly introduced superconcentrated electrolyte presents superior stability against parasitic photocatalytic decomposition. More significantly, the conventional and photo-assisted charging processes are rationally integrated as a unique hybrid strategy, in which the highly polarized charging stage is replaced by the photo-assisted Li2O2-scavenging process. By tuning the photocatalysis and Li2O2 electrochemical oxidization, the hybrid Li2O2-scavenging strategy not only boosts the cycle life of rechargeable Li-O-2 batteries but also opens possibilities in designing photocatalysis-involved rechargeable energy-storage battery systems.
A unique co-recovery strategy of cathode and anode from spent LiFePO4 battery

Kai-Di Du,Yun-Feng Meng,Xin-Xin Zhao,Xiao-Tong Wang,Xiao-Xi Luo,Wei Zhang,Xing-Long Wu

DOI: https://doi.org/10.1007/s40843-021-1772-6

2021-09-23

Science China Materials

Abstract:Along with the explosive growth in the market of new energy electric vehicles, the demand for Li-ion batteries (LIBs) has correspondingly expanded. Given the limited life of LIBs, numbers of spent LIBs are bound to be produced. Because of the severe threats and challenges of spent LIBs to the environment, resources, and global sustainable development, the recycling and reuse of spent LIBs have become urgent. Herein, we propose a novel green and efficient direct recycling method, which realizes the concurrent reuse of LiFePO4 (LFP) cathode and graphite anode from spent LFP batteries. By optimizing the proportion of LFP and graphite, a hybrid LFP/graphite (LFPG) cathode was designed for a new type of dualion battery (DIB) that can achieve co-participation in the storage of both anions and cations. The hybrid LFPG cathode combines the excellent stability of LFP and the high conductivity of graphite to exhibit an extraordinary electrochemical performance. The best compound, i.e., LFP:graphite = 3:1, with the highest reversible capacity (∼130 mA h g−1 at 25 mA g−1), high voltage platform of 4.95 V, and outstanding cycle performance, was achieved. The specific diffusion behavior of Li+ and PF6− in the hybrid cathode was studied using electrode kinetic tests, further clarifying the working mechanism of DIBs. This study provides a new strategy toward the large-scale recycling of positive and negative electrodes of spent LIBs and establishes a precedent for designing new hybrid cathode materials for DIBs with superior performance using spent LIBs.

materials science, multidisciplinary
Integrating a Photocatalyst into a Hybrid Lithium–Sulfur Battery for Direct Storage of Solar Energy

Na Li,Yarong Wang,Daiming Tang,Haoshen Zhou

DOI: https://doi.org/10.1002/anie.201503425

2015-01-01

Angewandte Chemie International Edition

Abstract:Direct capture and storage of abundant but intermittent solar energy in electrical energy-storage devices such as rechargeable lithium batteries is of great importance, and could provide a promising solution to the challenges of energy shortage and environment pollution. Here we report a new prototype of a solar-driven chargeable lithium-sulfur (Li-S) battery, in which the capture and storage of solar energy was realized by oxidizing S2- ions to polysulfide ions in aqueous solution with a Pt-modified CdS photocatalyst. The battery can deliver a specific capacity of 792mAhg(-1) during 2h photocharging process with a discharge potential of around 2.53V versus Li+/Li. A specific capacity of 199mAhg(-1), reaching the level of conventional lithium-ion batteries, can be achieved within 10min photocharging. Moreover, the charging process of the battery can proceed under natural sunlight irradiation.
An Emerging and Consummate Photocatalysis-Assisted Strategy for Efficient Recycling of Spent Lithium-Ion Batteries

Xiaowei Lv,Jiao Lin,Qingrong Huang,Xuan Sun,Ersha Fan,Renjie Chen,Feng Wu,Li Li

DOI: https://doi.org/10.1021/acsenergylett.3c01635

IF: 22

2023-09-21

ACS Energy Letters

Abstract:Imperfect recycling technology and inconsistent decommissioning levels hinder the joint development of social and economic benefits in the recycling of spent lithium-ion batteries (LIBs). Formulating a more consummate strategy to recover cathodes with different degradation levels is critical for optimizing the recycling of the spent LIBs. This paper presents an advanced approach for photocatalytic-assisted recovery of spent LIBs based on the decommissioning degree of cathode materials. UV-assisted Li and Co leaching efficiency reached 99.56% and 98.25%, over 35% higher than non-UV assistance, with a lower recovery cost than ultrasound (68.94%) and stirring (81.25%). Additionally, we realized the high-value reuse of photocatalytic-assisted leached lithium solution, and the repaired-LiCoO2 exhibited a high capacity, 179.4 mAh g–1, at 0.1 C. The recovery process generates more than three times the economic benefits of traditional methods. This environmentally friendly and energy-efficient recycling method is well-suited for efficiently recovering Ni-enriched anodes, offering new insights into recovering spent LIBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Photo-Rechargeable Li Ion Batteries using TiS2 Cathode

Amar Kumar,Raheel Hammad,Mansi Pahuja,Raul Arenal,Kaushik Ghosh,Soumya Ghosh,Tharangattu N. Narayanan

DOI: https://doi.org/10.48550/arXiv.2301.06155

2023-01-16

Abstract:Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here we demonstrate a two-electrode lithium ion solar battery with multifaceted TiS2-TiO2 hybrid sheets as cathode. Choice of TiS2-TiO2 electrode ensures the formation of a type II semiconductor heterostructure while the lateral heterostructure geometry ensures high mass/charge transfer and light interactions with the electrode. TiS2 has a higher lithium binding energy (1.6 eV) than TiO2 (1.03 eV), ensuring the possibilities of higher amount of Li ion insertion to TiS2 and hence the maximum recovery with the photocharging, as further confirmed by the experiments. Apart from the demonstration of solar solid-state batteries, the charging of lithium ion full cell with light indicates the formation of lithium intercalated graphite compounds, ensuring the charging of the battery without any other parasitic reactions at the electrolyte or electrode-electrolyte interfaces. Possible mechanisms proposed here for the charging and discharging processes of solar batteries, based on our experimental and theoretical results, indicate the potential of such systems in forthcoming era of renewable energies.

Applied Physics
A Bifunctional Photo‐Assisted Li–O 2 Battery Based on a Hierarchical Heterostructured Cathode

Malin Li,Xiaoxue Wang,Fei Li,Lijun Zheng,Jijing Xu,Jihong Yu

DOI: https://doi.org/10.1002/adma.201907098

IF: 29.4

2020-07-15

Advanced Materials

Abstract:Photo‐assisted charging is considered an effective approach to reducing the overpotential in lithium–oxygen (Li–O2) batteries. However, the utilization of photoenergy during the discharge process in a Li–O2 system has been rarely reported, and the functional mechanism of such a process remains unclear. Herein, a novel bifunctional photo‐assisted Li–O2 system is established by employing a hierarchical TiO2–Fe2O3 heterojunction, in which the photo‐generated electrons and holes play key roles in reducing the overpotential in the discharging and charging processes, respectively. Moreover, the morphology of the discharge product (Li2O2) can be modified via the dense surface electrons of the cathode under illumination, resulting in promoted decomposition kinetics of Li2O2 during the charging progress. Accordingly, the output and input energies of the battery can be tuned by illumination, giving an ultralow overpotential of 0.19 V between the charge and discharge plateaus with excellent cyclic stability (retaining a round‐trip efficiency of ≈86% after 100 cycles). The investigation of the bifunctional photo‐assisted process presented here provides significant insight into the mechanism of the photo‐assisted Li–O2 battery and addresses the overpotential bottleneck in this system.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Ultra-stable Binder-Free Rechargeable Li/I2 Batteries Enabled by "betadine'' Chemical Interaction

Zhen Meng,Xiaojian Tan,Shunlong Zhang,Hangjun Ying,Xufeng Yan,Huajun Tian,Guoxiu Wang,Wei-Qiang Han

DOI: https://doi.org/10.1039/c8cc06848h

IF: 4.9

2018-01-01

Chemical Communications

Abstract:An activated carbon cloth/polymer-iodine (ACC/PVP-I-2) composite was prepared by the Betadine method and employed as a high-performance cathode for rechargeable Li/I-2 batteries. Due to the synergistic effect of ACC and PVP-I-2, Li/I-2 cells with ACC/PVP-I-2 as the cathode exhibited superior electrochemical performance.
Photoactive cobalt-bipyridine electron mediator promotes reversible Li2O2 formation in irradiated Li-O2 battery

Xinjian Li,Yanhui Su,Yong Ma,Le Wei,Ying He,Yuting Gu,Shiwei Mei,Qiaoqiao Mu,ChengYuan Peng,Yang Peng,Zhao Deng

DOI: https://doi.org/10.1016/j.apcatb.2023.122964

2023-11-01

Abstract:Photo-assisted charge/discharge has witnessed marked success in Li-O2 batteries (LOBs) to overcome the sluggish kinetics of triphasic reactions at the cathode, but challenges remain to develop high-efficiency but low-cost photocathode catalysts. Herein, a photoactive electron mediator is applied, for the first time, as bifunctional photocathode catalyst in solar-assisted LOBs. The facilely synthesized tris(2,2-bipyridine) cobalt(II) complex (Co-bpy) manifests good electrocatalytic activity in dark and high photoactivity under illumination, concertedly affording an superior charge/discharge voltage gap of 0.12 V and round-trip efficiency of 97%. Moreover, a significantly enhanced charge/discharge reversibility was attained under illumination and attributed to the light-induced amorphization of Li2O2 that further extends the cycle life. A two-circuit model is proposed to rationalize the better reduction of charge/discharge polarization at lower operating current density. This work not only extends the family of photocathode catalysts to small-molecule complexes, but also offers new insights into the mechanism of photoenergy storage in LOBs.

chemistry, physical,engineering, chemical, environmental
Bifunctional WO3/TiO2 heterojunction photocathode for high-performance photo-assisted Li–O2 battery

Zhichao Xue,Chao Gao,Qiang Li,Mingfu Yu,Zhizhe Wang,Hong Sun

DOI: https://doi.org/10.1016/j.jelechem.2023.117781

IF: 4.598

2023-10-01

Journal of Electroanalytical Chemistry

Abstract:Photo-assisted charging is a useful method for mitigating high overpotential in Lithium–oxygen (Li–O2) batteries. Herein, WO3/TiO2 heterostructures were carefully designed on carbon-fiber fabrics and used as photocathodes in photo-assisted Li-O2 batteries. The transfer mechanism of photoexcited carriers with a strong redox ability in WO3/TiO2 heterostructures reduces the compounding of electrons (e-) and holes (h+). Accordingly, the battery’s energy can be tuned by illumination, giving an ultra-low overpotential of 0.11 V at a current density of 0.05 mA·cm-2 with excellent cycling stability (retaining a round-trip efficiency of 96.21% after 150 cycles). The cycle life can reach 1000 h due to increased photo-generated carrier separation efficiency and decreased electrochemical reaction impedance.

chemistry, analytical,electrochemistry
Concurrent recycling chemistry for cathode/anode in spent graphite/LiFePO4 batteries: Designing a unique cation/anion-co-workable dual-ion battery

Yun-Feng Meng,Hao-Jie Liang,Chen-De Zhao,Wen-Hao Li,Zhen-Yi Gu,Meng-Xuan Yu,Bo Zhao,Xian-Kun Hou,Xing-Long Wu

DOI: https://doi.org/10.1016/j.jechem.2021.04.047

IF: 13.1

2022-01-01

Journal of Energy Chemistry

Abstract:With the increasing popularity of new energy electric vehicles, the demand for lithium-ion batteries (LIBs) has been growing rapidly, which will produce a large number of spent LIBs. Therefore, recycling of spent LIBs has become an urgent task to be solved, otherwise it will inevitably lead to serious environmental pollution. Herein, a unique recycling strategy is proposed to achieve the concurrent reuse of cathode and anode in the spent graphite/LiFePO4 batteries. Along with such recycling process, a unique cathode composed of recycled LFP/graphite (RLFPG) with cation/anion-co-storage ability is designed for new-type dual-ion battery (DIB). As a result, the recycle-derived DIB of Li/RLFPG is established with good electrochemical performance, such as an initial discharge capacity of 117.4 mA h g−1 at 25 mA g−1 and 78% capacity retention after 1000 cycles at 100 mA g−1. The working mechanism of Li/RLFPG DIB is also revealed via in situ X-ray diffraction and electrode kinetics studies. This work not only presents a far-reaching significance for large-scale recycling of spent LIBs in the future, but also proposed a sustainable and economical method to design new-type secondary batteries as recycling of spent LIBs.

chemistry, physical,engineering, chemical, applied,energy & fuels

Saving Electric Energy by Integrating a Photoelectrode into a Li-ion Battery

Photoinduced Rechargeable Lithium-Ion Battery

Intelligent dual-anode strategy for high-performance lithium-ion batteries

An organic-halide perovskite-based photo-assisted Li-ion battery for photoelectrochemical storage

Integrating a Redox-Coupled Dye-Sensitized Photoelectrode into a Lithium–oxygen Battery for Photoassisted Charging

Enhancing Lithium‐Ion Battery Performance with Photoactive LiFePO4/CsPbBr3 Quantum Dots Composite Cathodes

Dual-functional iodine photoelectrode enabling high performance photo-assisted rechargeable lithium iodine batteries

Light‐Motivated SnO 2 /TiO 2 Heterojunctions Enabling the Breakthrough in Energy Density for Lithium‐Ion Batteries

Reasonable Design and Deep Insight of Efficient Integrated Photorechargeable Li-Ion Batteries by Using a Cu/CuO/Cu2S Electrode

Approaching the theoretical capacity of TiO2 anode in a photo-rechargeable lithium-ion battery

A sustainable LiFePO4/graphite hybrid cathode capable of stepwise cation and anion storage

Boosting the Cycle Life of Aprotic Li–O2 Batteries Via a Photo‐Assisted Hybrid Li2O2‐Scavenging Strategy

A unique co-recovery strategy of cathode and anode from spent LiFePO4 battery

Integrating a Photocatalyst into a Hybrid Lithium–Sulfur Battery for Direct Storage of Solar Energy

An Emerging and Consummate Photocatalysis-Assisted Strategy for Efficient Recycling of Spent Lithium-Ion Batteries

Photo-Rechargeable Li Ion Batteries using TiS2 Cathode

A Bifunctional Photo‐Assisted Li–O 2 Battery Based on a Hierarchical Heterostructured Cathode

Ultra-stable Binder-Free Rechargeable Li/I2 Batteries Enabled by "betadine'' Chemical Interaction

Photoactive cobalt-bipyridine electron mediator promotes reversible Li2O2 formation in irradiated Li-O2 battery

Bifunctional WO3/TiO2 heterojunction photocathode for high-performance photo-assisted Li–O2 battery

Concurrent recycling chemistry for cathode/anode in spent graphite/LiFePO4 batteries: Designing a unique cation/anion-co-workable dual-ion battery