Abstract:Twisted and Coiled Actuators (TCAs) are a class of new artificial muscles for flexible actuations. However, conventional TCAs based on nylon fibers commonly require high driving temperature, which limits their applications. Although the TCAs based on spandex fibers can produce high strain under low driving temperature, their output force is low. In this work, a Compound TCA (CTCA) based on spandex fibers and an SMA skeleton is developed. The spandex fibers are spirally wound on the surface of the SMA wire with large number of spiral turns, and the SMA skeleton forms a coil, which can produce additional contraction force for the CTCA owing to the shape memory effect of the SMA wire. To obtain the designated CTCA configuration, a new double twisting fabrication process is proposed, i.e., twisting of spandex fibers followed by twisting of the pre-twisted spandex fibers and an SMA wire together. The CTCA will form a compound twisted fiber configuration, which has the merits of low driving temperature, high strain, and high output force. The influence of the fabrication parameters on the stroke and output force of the CTCA is investigated experimentally. The effect of temperature on the thermal expansion coefficient of spandex fibers is quantified through experiments. It is found that pre-stretching of spandex fibers significantly enhances its thermal expansion behavior. Based on the geometrical parameters and the materials properties of the CTCA, a static model that describes the displacement of CTCA with respect to the temperature and load is established. Experiments under different loads are conducted to verify the accuracy of the static model. Simulation and experimental results show that the proposed CTCA achieves superior performance, with the maximum contraction strain of 46.8 and the maximum output force of 4 N at 80 C driving temperature.

Cross-shaped Twisting Structure Using SMA-based Smart Soft Composite

A Kirigami Shape Memory Polymer Honeycomb Concept for Deployment

SMA Wire Use in Hybrid Twisting and Bending/Extending Soft Fiber-Reinforced Actuators

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

A helical actuator driven by biased SMA: design, model, and experiment

A Magnet‐Driven Soft Bistable Actuator

Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite

Torsional actuation and vari-stiffness characteristics of SMA/basalt hybrid braided composite tubes

Deflection and Performance Analysis of Shape Memory Alloy-Driven Fiber–Elastomer Composites with Anisotropic Structure

Design and Modeling of a Compound Twisted and Coiled Actuator Based on Spandex Fibers and an SMA Skeleton

A Reconfigurable Soft Helical Actuator with Variable Stiffness Skeleton

A New X-Actuator Design for Controlling Wing Bending and Twisting Modes

Manufacture and Deformation Angle Control of a Two-Direction Soft Actuator Integrated with SMAs

Intergrated Shape Memory Alloys Soft Actuators with Periodic and Inhomogeneous Deformations by Modulating Elastic Tendon Structures

A NEW X-ACTUATOR DESIGN FOR DUAL BENDING/TWISTING CONTROL OF WINGS

Development of a Novel SMA-Driven Compliant Rotary Actuator Based on a Double Helical Structure

A multiple-shape memory polymer-metal composite actuator capable of programmable control, creating complex 3D motion of bending, twisting, and oscillation

A Bi-State Shape Memory Material Composite Soft Actuator

Design and modelling of a reversible shape memory alloy torsion hinge actuator

Experiments and Modeling of Machined Spring Rotary Actuators with Shape Memory Alloys

SMA-origami Coupling: Online Configuration Switches and Stability Property Modulation