Inorganic/Organic Hybrid Optical Upconversion Device

dayan ban,sijin han,zhenghong lu,a j springthorpe,h c liu

DOI: https://doi.org/10.1109/CLEO.2007.4452610

2007-01-01

Abstract:We report a hybrid optical upconversion device that emits visible light upon the detection of input near infrared light through direct tandem integration of an inorganic InGaAs/InP photodetector with an organic light emitting diode. (c) 2007 Optical Society of America

What problem does this paper attempt to address?

Infrared organic/inorganic optical upconverting devices

dayan ban,jun chen,michael g helander,zhenghong lu,marcel graf,a j springthorpe,p j poole,h c liu

DOI: https://doi.org/10.1117/12.835658

2009-01-01

Abstract:This paper presents our research and development efforts in realizing and perfecting organic/inorganic photon upconversion devices for wavelengths from near infrared (1.5 μm) region to visible light (green). The basic idea is to integrate an InGaAs/InP photodetector with an organic light emitting diode (OLED), connected in series. The detected photocurrent drives the OLED to emit visible light, thereby achieving the upconversion. A few approaches of integration methods and device designs have been tested.
Semi‐Transparent, Pixel‐Free Upconversion Goggles with Dual Audio‐Visual Communication

Chun-Jen Shih,Chao-Yang Lin,Kai Chen,Nurul Ridho Al Amin,Dian Luo,I-Sheng Hsu,Abdul Khalik Akbar,Sajal Biring,Chih-Hsuan Lu,Bo-Han Chen,Shang-Da Yang,Jiun-Haw Lee,Shun-Wei Liu

DOI: https://doi.org/10.1002/advs.202302631

2023-01-01

Abstract:The intractable brittleness and opacity of the crystalline semiconductor restrict the prospect of developing low-cost imaging systems. Here, infrared visualization technologies are established with large-area, semi-transparent organic upconversion devices that bring high-resolution invisible images into sight without photolithography. To exploit all photoinduced charge carriers, a monolithic device structure is proposed built on the infrared-selective, single-component charge generation layer of chloroaluminum phthalocyanine (ClAlPc) coupled to two visible light-emitting layers manipulated with unipolar charges. Transient pump-probe spectroscopy reveals that the ClAlPc-based device exhibits an efficient charge dissociation process under forward bias. This process is indicated by the prompt and strong features of electroabsorption screening. Furthermore, by imposing the electric field, the ultrafast excited state dynamic suggests a prolonged charge carrier lifetime from the ClAlPc, which facilitates the charge utilization for upconversion luminance. For the first time, >30% of the infrared photons are utilized without photomultiplication strategies owing to the trivial spectrum overlap between ClAlPc and the emitter. In addition, the device can broadcast the acoustic signal by synchronizing the device frequency with the light source, which enables to operate it in dual audio-visual mode. The work demonstrates the potential of upconversion devices for affordable infrared imaging in wearable electronics.
Optical Upconversion Devices Based on Photosensitizer-Doped Organic Light-Emitting Diodes

Jiashu Lu,Yuan Zheng,Zhijian Chen,Lixin Xiao,Qihuang Gong

DOI: https://doi.org/10.1063/1.2813619

IF: 4

2007-01-01

Applied Physics Letters

Abstract:The optical upconversion of infrared light to visible light has been achieved in photosensitizer-doped organic light-emitting diodes, where poly(N-vinylcarbazole) doped with infrared photosensitizer of 2,4,7-trinitro-9-fluorenylidene)malonitrile was used as hole-transporting layer, and tris(8-hydroxyquinoline) aluminum acted as both emitting and electron-transporting layers. Both electroluminescent intensity and current were enhanced under infrared illumination. The enhancement ratio was obtained as 2.45 times for electroluminescent emission and 1.45 times for current. This work brought forth a prototype design for novel flexible organic optical upconversion device used in near infrared field.
Photosensitizer-Doped Organic Light-Emitting Diodes For Near Infrared To Visible Optical Upconversion

Qihuang Gong,Zhijian Chen,Lixin Xiao,Yuan Zheng,Jiashu Lu

DOI: https://doi.org/10.1109/cleo.2008.4552069

2008-01-01

Abstract:The optical upconversion of infrared light to visible light has been achieved in infrared photosensitizer-doped organic light-emitting diodes. This work brought forth a prototype design for novel flexible organic optical upconversion device. (C)2008 Optical Society of America
Optical Up-Conversion Devices Based on Organic and Inorganic Quantum Dots Materials

Jing Xiao,Zhaoyang Yin,Zhenyu Tang,Zhigang Gao,Lian Zhang,Jing Ren

DOI: https://doi.org/10.1039/d4tc00083h

IF: 6.4

2024-01-01

Journal of Materials Chemistry C

Abstract:Infrared (IR) to visible up-conversion devices made by incorporating IR detectors with visible emitting units can directly convert IR light into visible light. They are currently of great significance in engineering monitoring, medical imaging and night vision imaging applications. Up-conversion devices without complex readout circuits can be fabricated entirely using organic or inorganic materials. Additionally, the construction of organic/inorganic hybrid devices has also been accomplished. Strong absorption of IR light and efficient emission of visible light can be achieved by novel IR up-conversion devices based on organic emitting units and inorganic quantum dot photodetectors. Organic/inorganic up-conversion devices act as an effective substitute for the previous infrared imagers that consist of semiconductor photodiode arrays connected with readout circuits. In this review, which is the first of its kind, the characteristics and design principles of up-conversion devices are described. The merits and defects of up-conversion devices with all kinds of semiconductor materials are analysed in a critical way. Finally, the challenges and opportunities encountered by these materials and devices are summarized. Infrared (IR) to visible up-conversion devices made by incorporating IR detectors with visible emitting units are able to directly convert IR light into visible light.
Organic near-infrared upconversion devices: Design principles and operation mechanisms

Wenli Lv,Junkang Zhong,Yingquan Peng,Yao Li,Xiao Luo,Lei Sun,Feiyu Zhao,Jianping Zhang,Hongquan Xia,Ying Tang,Sunan Xu,Ying Wang

DOI: https://doi.org/10.1016/j.orgel.2016.01.032

IF: 3.868

2016-01-01

Organic Electronics

Abstract:Optical upconversion devices up-converting near-infrared (NIR) light to visible light have attracted a great deal of research interest in the past decades. Among these devices, organic upconversion devices have been presented as an alternative strategy for simplifying the fabrication process and reducing the cost. In recent years, along with the development of organic electronics, several types of organic NIR upconversion devices have been reported. However, there have been very few systematic studies of the design principles and operation mechanisms of organic NIR upconversion devices. In order to illustrate the structural design principles and operation mechanisms, organic upconversion devices based on donor/acceptor planar heterojunction (PHJ) as NIR sensitizer and inverted OLED structure as emitter are fabricated and studied. Significantly, two types of photo-generated electron and hole based organic upconversion devices are realized by ingeniously exchanging the position of the PHJ and the inverted OLED in the devices, respectively. The light emission in the former results from the recombination of photo-generated electrons with the injected holes from the anode, while that of the later from the recombination of photo-generated holes with the injected electrons from the cathode. Both types of the upconversion devices demonstrated great potentials for future pixel-less NIR imaging applications.
Improved efficiency of organic/inorganic hybrid near-infrared light upconverter by device optimization.

Xinbo Chu,Min Guan,Linsen Li,Yang Zhang,Feng Zhang,Yiyang Li,Zhanping Zhu,Baoqiang Wang,Yiping Zeng

DOI: https://doi.org/10.1021/am301340p

IF: 9.5

2012-01-01

ACS Applied Materials & Interfaces

Abstract:An organic/inorganic hybrid up-conversion device was demonstrated in this work, which can convert near-infrared light (NIR) to visible green at high conversion efficiency. The upconverter was fabricated by integrating an In(0.12)Ga(0.88)As/GaAs multiquantum wells (MQWs) photodetector (PD) with an organic light emitting diode (OLED). The up-conversion efficiency of 4.0 W/W % was obtained at 20 V under NIR illumination of 1 mW/mm(2) at room temperature by optimizing the structure of the PD unit and adding MoO(3) doped perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) as interfacial layer of OLED. Meanwhile, the green light output induced by NIR achieved 6050 cd/m(2), which proves that the organic/inorganic hybrid upconverter an excellent candidate that can be applied in light converter field.
High-performing Organic/quantum Dot Hybrid Upconversion Device Based on a Single-Component Near-Infrared-sensitive Layer

Ke Wang,Yuanhong Hu,Lixiang Chen,Haijun Jiang,Haohong Jiang,Xingwen Tan,Qiaoming Zhang,Yanlian Lei

DOI: https://doi.org/10.1063/5.0228406

IF: 4

2024-01-01

Applied Physics Letters

Abstract:A donor/acceptor (D/A) heterojunction with an interfacial energetic offset is demonstrated to enable efficient exciton dissociation in organic photodetectors and upconversion devices (UCDs). Unfortunately, this approach usually encounters complicated optimization procedures and interfacial instability. Herein, we present an alternative strategy for achieving high-performing UCDs by utilizing an organic single-component near-infrared (NIR)-sensitive layer instead of a D/A heterojunction. The showcased UCD is constructed by vertically stacking an organic single-component Y6 NIR-detection unit and a quantum dot light-emitting unit. Due to the high dielectric constant and low exciton binding energy of the non-fullerene acceptor Y6, free carriers are directly and spontaneously generated upon NIR light excitation. As a result, the single-component UCD achieves a low light detection capability of 2.5 μW/cm2, a fast refresh rate of >3.8 × 104, and a high resolution exceeding 1100 dpi, providing a stable optical response to high-frequency NIR signals and high-quality NIR imaging.
Near Infrared to Visible Light Organic Up-Conversion Devices with Photon-to-photon Conversion Efficiency Approaching 30%

Dezhi Yang,Xiaokang Zhou,Dongge Ma,Agafonov Vadim,Tansir Ahamad,Saad M. Alshehri

DOI: https://doi.org/10.1039/c8mh00572a

IF: 13.3

2018-01-01

Materials Horizons

Abstract:Near infrared to visible light organic up-conversion devices have drawn more and more attention for their advantages of low cost, large area, flexible and easy processing. However, the photon-to-photon conversion efficiency is still a challenge for practical application. Here, high-performance near infrared to visible light organic up-conversion devices were developed by integrating a near-infrared polymer photodetector and a green tandem organic light emitting diode. The integrated devices showed a peak photon-to-photon conversion efficiency up to 29.6%, which is among the highest reported values. Comprehensive studies on the both optical and electrical interaction between the light absorption unit and the light emission unit in the integrated devices revealed that the more than doubled electron-to-photon conversion quantum efficiency was obtained through the photo-multiplication effect of tandem OLEDs. Furthermore, large area and flexible up-conversion devices with the same structure were also fabricated, showing a better imaging performance than the commercial IR detection card.
Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

hongtao lin,yishi wu,zhenyi yu,hongbing fu

DOI: https://doi.org/10.1039/c5nj02192h

IF: 3.3

2016-01-01

New Journal of Chemistry

Abstract:Photoinitiated interfacial electron transfer from organic semiconductors to inorganic ones is extremely important in organic/inorganic hybrid optoelectronic materials. Herein, we have prepared hybrid ZnO nanorods by grafting TDPP and TTDPP molecules through carboxyl acid groups. The steady-state spectroscopy results revealed that photoluminescence was subjected to severe quenching in the hybrid nanocomposites. Furthermore, time-resolved fluorescence and femtosecond transient absorption data verified the occurrence of the interface charge transfer between TDPP or TTDPP molecules and ZnO nanorods in the hybrid nanocomposites. The high performance UV-vis photodetector based on the TTDPP/ZnO hybrid have been fabricated with a photoresponsivity of 16.9 A W-1 and an on/off ratio as high as 10(4). The excellent visible-light photoresponse of the hybrid device can be attributed to the broadband absorption after the anchoring of the TTDPP compound on the surface of ZnO nanorods, the efficient cascade charge transfer process and the excellent capability of ZnO nanorods to provide direct and stable pathways for the transport of photogenerated electrons toward the collection electrode. This provides guidelines for the construction of organic/inorganic hybrids for optoelectronic applications.
Development of Photofunctional Devices Based on Organic–Inorganic Hybrid Structures

Ayumi ISHII

DOI: https://doi.org/10.5796/electrochemistry.21-00090

2021-11-05

Electrochemistry

Abstract:In this research, organic–inorganic hybrid materials that enable the detection and manipulation of “invisible light” such as weak light, polarized light, and near-infrared (NIR) light are prepared and optoelectronic devices based on these materials are developed. The photoelectric conversion or energy transfer process resulting from light absorption is precisely controlled at the heterointerface of organic–inorganic hybrid structures, which enables the highly efficient amplification, conversion, and detection of invisible light under normal temperatures and pressures. Here, novel optical functions and devices based on organic–inorganic hybrid structures and interfaces are presented. For instance, in a hybrid structure in which organic molecules and inorganic semiconductors are chemically bonded, photocurrent was amplified more than 2000-fold at their heterointerface, resulting in highly sensitive photodetection at a low voltage (<1 V). As a novel device structure for the direct detection of circularly polarized light with high sensitivity, an inorganic crystal thin film with a one-dimensional helical structure was fabricated via interaction with organic chiral molecules. For NIR light, dye-sensitized up-conversion nanoparticles that can convert NIR light as weak as sunlight into visible light with high efficiency were developed and incorporated into a perovskite-based visible-light detector. This device detected light in the NIR region through energy conversion from NIR to visible light. And also, NIR light was promoted as ultra-bright luminescence by one-photon absorption two-photon emission (quantum-cutting) process in heterometal hybridized crystal thin films. The light-emitting diode was fabricated and demonstrated 6 % external conversion efficiency of field emission in the NIR region.

electrochemistry
Infrared-Light Visualization by Organic Upconversion Devices

Xin Hu,Gui Xiao,Yiwei Li,Shuo-en Wu,Qian Chen,Ning Li,Xiubao Sui

DOI: https://doi.org/10.1021/acsaelm.3c00943

IF: 4.494

2023-01-01

ACS Applied Electronic Materials

Abstract:Infrared-light sensing has a wide range of applications covering artificial intelligence, biomedicine, surveillance, and defense. With the rapidly increasing demand for various infrared photodetectors, the conventional infrared imagers based on InGaAs, HgCdTe, superlattices, quantum wells, and so on are facing difficulties in realizing flexibility, room-temperature operationality, large area, and low price. This raises the demand for infrared materials, device structures, and operational principles. The upconversion-type imagers with the ability to convert low-energy infrared photons to high-energy visible photons have become an important infrared detection and imaging technique due to their compact device geometry and direct optical signal conversion capability. Upconversion-type imagers exhibit pixel-less imaging capability with large active areas, potentially very attractive for high-resolution infrared imaging applications. In this spotlight, we focus on recent advances in the upconversion technique based on organic semiconductors. We give much attention to the current structure design and physical mechanisms of such upconversion devices. The metrics and optoelectronic properties of these devices are discussed. Specifically, the potential of such a technology for applications is highlighted. Lastly, the limitations and challenges of the upconversion technique are discussed, providing perspectives to promote the upconversion-type infrared-light detection and imaging in the future.
Transparent organic upconversion device targeting high- grade infrared visual image

Chun-Jen Shih,Ya-Ze Li,Meng-Zhen Li,Sajal Biring,Bo-Chi Huang,Che-Wei Liu,Tzu-Hung Yeh,Dian Luo,Jiun-Haw Lee,Yi-Hsuan Huang,Ken-Tsung Wong,Shun-Wei Liu

DOI: https://doi.org/10.1016/j.nanoen.2021.106043

IF: 17.6

2021-08-01

Nano Energy

Abstract:Infrared-to-visible transparent upconverter offers an appealing prospect of demonstrating in situ invisible information without interfering with the intrinsic vision of human eyes. However, previous studies required high operational voltage for visible light emission failing to meet the prerequisite of practical application. Here, we report an organic upconversion device composed of a single photoactive material ClAlPc for sensing infrared light and subsequent visualization by BCzPh:CN-T2T exciplex co-hosted phosphorescent light-emitting diode. Incident NIR signal (λmax at 780 nm) is upconverted into visible light emission (λmax at 523 nm) under an onset bias voltage of merely 1.7 V by the virtue of barrier-less bipolar exciplex design. Particularly, the device exhibits linear dynamic luminance toward NIR power density down to 34 μW/cm2 and real-time response to frequency-modulated NIR signal up to 10 kHz. By comprising a transparent multilayered electrode for see-through upconverter, a high-quality infrared visual image with a maximum resolution of 1588 dpi is demonstrated.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Organic–Inorganic Hybrid Shortwave Infrared Up‐conversion Imaging Devices with Ultra‐high Refresh Rate and Excellent Resolution

Meng Zhang,Shuaiquan Xu,Ke Ding,Shuai Chen,Jinwen Wang,Chaoqiang Wang,Jing Pan,Xiujuan Zhang,Jiansheng Jie

DOI: https://doi.org/10.1002/admt.202300854

IF: 6.8

2023-08-04

Advanced Materials Technologies

Abstract:An organic–inorganic hybrid shortwave infrared (SWIR) imaging device composed of a phosphorescent OLED and a nickel silicide (NiSix)/Si Schottky barrier diode (SBD) with pyramidal microstructure is developed. The device demonstrates excellent up‐conversion imaging behaviors at SWIR light of 1064, 1310, and 1550 nm with an ultra‐fast refresh rate. Shortwave infrared (SWIR) imaging devices have gained increasing importance in various fields, including security monitoring, biomedical imaging, advanced driver assistance, and semiconductor industry. However, complex technological processes of epitaxial growth and flip‐chip bonding hinder the development of high‐performance and low‐cost SWIR imaging devices. Herein, a novel organic–inorganic hybrid optical up‐conversion (OUC) imaging device by stacking a phosphorescent organic light‐emitting diode (OLED) with a NiSix/Si Schottky barrier diode (SBD) is developed. The pyramidal microstructures of silicon are utilized to greatly enhance light absorption of the NiSix/Si SBD, enabling the device to respond to a broadband SWIR light of 1064, 1310, and 1550 nm that are beyond the bandgap limit of silicon. Significantly, the device demonstrates excellent up‐conversion imaging behaviors at SWIR light with an ultra‐fast refresh rate of over 3000 Hz and a high‐resolution imaging capability of 508 ppi. This work paves the way toward the fabrication of high‐performance, low‐cost silicon‐based OUC devices for SWIR imaging applications.

materials science, multidisciplinary
Organic–inorganic Hybrid Electroluminescence Device Fabricated by Conjugated Polymer and ZnS:Mn

XH Yang,XR Xu

DOI: https://doi.org/10.1063/1.1306390

IF: 4

2000-01-01

Applied Physics Letters

Abstract:An organic–inorganic hybrid device was fabricated. The architecture of the hybrid device consisted of two layers sandwiched between two injecting electrodes, one of which was a conjugated polymer layer and the other was an inorganic material layer. Emission from both the organic and inorganic layers was observed, but the mechanisms of luminescence for the layers were different. Our primary results suggest the possibility of integrating different types of luminescence into one device structure.
Advances in Organic Upconversion Devices

Chengchang Fu,Ge Mu,Kangkang Weng,Xin Tang

DOI: https://doi.org/10.3390/photonics11090808

IF: 2.536

2024-09-01

Photonics

Abstract:Organic upconversion devices (OUDs) are a class of technology that convert low-energy infrared (IR) photons into high-energy visible photons, offering extensive application prospects in fields such as bioimaging, photovoltaics, and display technologies. In recent years, organic materials-based upconversion technology has attracted considerable attention and research interest due to its unique advantages in molecular design, material diversity, and flexible device fabrication. An up-conversion imager consists of the organic photosensitive layer as the sensitizer which is used for absorbing infrared light and the active layers of the organic light-emitting diodes (OLEDs) as emitters which are used for displaying visible light. Under the effect of their common, the incident IR light is converted to visible light. Here, we review the recent progress in the field of organic upconversion materials, explain their performance and characterization, and discuss the challenges and prospects.

optics
An Upconversion Device Based on High-Performance Dual-Layer White Organic Electroluminescent Devices

Weigao Wang,Yiyang Li,Yili Wan,Yu Duan,Hua An,Zhengchun Peng

DOI: https://doi.org/10.1063/5.0222205

IF: 1.697

2024-01-01

AIP Advances

Abstract:Large-area imaging techniques in the short-wave infrared spectral region remain a pressing need. Organic light-emitting diodes and infrared photodetectors can be combined to form a near-infrared (NIR) to visible upconversion device, which has great potential to replace traditional infrared imaging systems. The integration of a white organic light-emitting diode (WOLED) with infrared photodetectors has become essential to realize full-color displays for its simple preparation process and high compatibility. This work has designed and optimized a WOLED to achieve stable emission with high brightness (19 470 cd m−2) and high external quantum efficiency (EQE = 18.08%) at a wide voltage range, thereby reducing chromaticity drift caused by voltage fluctuations. Moreover, photon-generated holes in the NIR-sensitive photodetector are able to inject into the WOLED for visible light emission. Consequently, we have obtained a high-performance upconversion device with a luminance on-off ratio exceeding 5 × 103 at 850 nm NIR and a high color stability over a wide range of operating voltage. Our efforts have accomplished a high-performance upconversion device from NIR to white visible light, laying the groundwork for a preliminary exploration of full-color displays.
Organic Upconversion Imager with Dual Electronic and Optical Readouts for Shortwave Infrared Light Detection

Ning Li,Naresh Eedugurala,Dong‐Seok Leem,Jason D. Azoulay,Tse Nga Ng

DOI: https://doi.org/10.1002/adfm.202100565

IF: 19

2021-02-19

Advanced Functional Materials

Abstract:Abstract There remains a critical need for large‐area imaging technologies that operate in the shortwave infrared spectral region. Upconversion imagers that combine photo‐sensing and display in a compact structure are attractive since they avoid the costly and complex process of pixilation. However, upconversion device research is primarily focused on the optical output, while electronic signals from the imager remain underutilized. Here, an organic upconversion imager that is efficient in both optical and electronic readouts, extending the capability of human and machine vision to 1400 nm, is designed and demonstrated. The imager structure incorporates interfacial layers to suppress non‐radiative recombination and provide enhanced optical upconversion efficiency and electronic detectivity. The photoresponse is comparable to state‐of‐the‐art organic infrared photodiodes exhibiting a high external quantum efficiency of ≤35% at a low bias of ≤3 V and 3 dB bandwidth of 10 kHz. The large active area of 2 cm 2 enables demonstrations such as object inspection, imaging through smog, and concurrent recording of blood vessel location and blood flow pulses. These examples showcase the potential of the authors’ dual‐readout imager to directly upconvert infrared light for human visual perception and simultaneously yield electronic signals for automated monitoring applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Recent advances with optical upconverters made from all-organic and hybrid materials

Roland Hany,Marco Cremona,Karen Strassel

DOI: https://doi.org/10.1080/14686996.2019.1610057

2019-05-28

Abstract:The growing interest in near-infrared (NIR) imaging is explained by the increasing number of applications in this spectral range, which includes process monitoring and medical imaging. NIR-to-visible optical upconverters made by integrating a NIR photosensitive unit with a visible emitting unit convert incident NIR light to visible light, allowing imaging of a NIR scene directly with the naked eye. Optical upconverters made entirely from organic and hybrid materials - which include colloidal quantum dots, and metal-halide perovskites - enable low-cost and pixel-free NIR imaging. These devices have emerged as a promising addition to current NIR imagers based on inorganic semiconductor photodiode arrays interconnected with read-out integrated circuitry. Here, we review the recent progress in the field of optical upconverters made from organic and hybrid materials, explain their functionality and characterization, and identify open challenges and opportunities.
A high-performance dual-functional organic upconversion device with detectivity approaching 1013 Jones and photon-to-photon efficiency over 20%

Zeyu He,Heng-Yuan Zhang,Xiaoyang Du,Xin Yu,Jiayue Han,Luye Cao,Hui Lin,Jun Wang,Caijun Zheng,Silu Tao

DOI: https://doi.org/10.1039/d3mh01337e

IF: 13.3

2023-10-27

Materials Horizons

Abstract:Organic upconversion devices (UCDs) are a cutting-edge technology and hot topic because of their advantages of low cost and convenience in the important applications of near-infrared (NIR) detection and imaging. However, to realize utilization of triplet excitons (T 1 ), previous UCDs have the drawback of heavily relying on toxic and costly heavy-metal-doped emitters. More importantly, due to poor performance of the detecting unit and/or emitting unit, improving their detectivity ( D *) and photon-to-photon conversion efficiency ( η p–p ) is still a challenge for real applications. Here, we report a high-performance dual-functional purely organic UCD that has an outstanding D * approaching 10 13 Jones and a high η p–p of 20.1% in the NIR region, which are some of the highest values among those reported for UCDs. The high performance is credited to the excellent D * of the detecting unit, exceeding 10 14 Jones, and is also attributed to efficient T 1 utilization via a dual reverse intersystem crossing channel and high optical out coupling achieved via a high horizontal dipole ratio in the emitting unit. The high D * and η p–p enable the UCD to detect 850 nm light at as little as 0.29 μW cm −2 and with a high display contrast of over 70 000 : 1, significantly improving the potential of practical applications of UCDs in NIR detection and imaging. Furthermore, a fast rise time and fall time of 8.9 and 14.8 μs are also achieved. Benefiting from the high performance, consequent applications of low-power pulse-state monitoring and fine-structure bio-imaging are successfully realized with high quality results by using our organic UCDs. These results demonstrate that our design not only eliminates dependence of UCDs on heavy-metal emitters, but also takes their performance and applications to a high level.

materials science, multidisciplinary,chemistry

Inorganic/Organic Hybrid Optical Upconversion Device

Infrared organic/inorganic optical upconverting devices

Semi‐Transparent, Pixel‐Free Upconversion Goggles with Dual Audio‐Visual Communication

Optical Upconversion Devices Based on Photosensitizer-Doped Organic Light-Emitting Diodes

Photosensitizer-Doped Organic Light-Emitting Diodes For Near Infrared To Visible Optical Upconversion

Optical Up-Conversion Devices Based on Organic and Inorganic Quantum Dots Materials

Organic near-infrared upconversion devices: Design principles and operation mechanisms

Improved efficiency of organic/inorganic hybrid near-infrared light upconverter by device optimization.

High-performing Organic/quantum Dot Hybrid Upconversion Device Based on a Single-Component Near-Infrared-sensitive Layer

Near Infrared to Visible Light Organic Up-Conversion Devices with Photon-to-photon Conversion Efficiency Approaching 30%

Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

Development of Photofunctional Devices Based on Organic–Inorganic Hybrid Structures

Infrared-Light Visualization by Organic Upconversion Devices

Transparent organic upconversion device targeting high- grade infrared visual image

Organic–Inorganic Hybrid Shortwave Infrared Up‐conversion Imaging Devices with Ultra‐high Refresh Rate and Excellent Resolution

Organic–inorganic Hybrid Electroluminescence Device Fabricated by Conjugated Polymer and ZnS:Mn

Advances in Organic Upconversion Devices

An Upconversion Device Based on High-Performance Dual-Layer White Organic Electroluminescent Devices

Organic Upconversion Imager with Dual Electronic and Optical Readouts for Shortwave Infrared Light Detection

Recent advances with optical upconverters made from all-organic and hybrid materials

A high-performance dual-functional organic upconversion device with detectivity approaching 1013 Jones and photon-to-photon efficiency over 20%