Abstract:A method is developed to estimate the mean texture depth (MTD) value, which to some extent represents pavement quality, using measurements from a microphone mounted underneath a moving vehicle. Such measurements will include tire-generated sound that carries information about the road macrotexture as well as noise generated by the wind and vehicle. The proposed method uses principal component analysis (PCA) to differentiate important information about the road surface from noisy data while the vehicle is moving. The variations in frequency of the noise are assumed to be small compared with the variations in frequency of the signal related to the road-surface condition, which allows the PCA approach to separate noise from signals that carry information about the road-surface condition. The analysis begins with acoustic pressure measurements being made over various road-surface conditions underneath a moving vehicle. Fourier transforms are taken over various time windows and a PCA is performed over the resulting vectors. This yields a set of PC vectors representing the road-surface conditions. The frequency range of concern is from 0 to 2,000Hz, according to the amplitude of frequency spectra of collected acoustic measurement. The pavement-macrotexture depth (i.e.,MTD) is estimated by matching the PC vector set derived from unknown road conditions with one of the vector sets of known road conditions. Successful applications of this method are demonstrated by accurate estimations of the MTD of pavement directly from acoustic measurements. The results indicate that PCA is a powerful approach to eliminate the noise that is not associated with the road surface, and therefore, the PC vectors can be used to accurately match the MTD values. The PCA approach for tire-generated sound might also be used to differentiate subsurface road conditions, a precursor of many defects such as potholes and severe cracking.

Road Profile Estimation of City Roads Using Dtps

Dynamic Tire Pressure Sensor For Measuring Ground Vibration

Evaluating road surface conditions using dynamic tire pressure sensor

IRI Measurement Using Dynamic Tire Pressure Sensor with an Axle Accelerometer

Measurement Through Dynamic Tire Pressure Sensor Inside the Tire

Iri Estimation Using Analysis of Dynamic Tire Pressure and Axle Acceleration

Research on rapid measurement of medium short wave longitudinal road profiles

An Application Study on Road Surface Monitoring Using DTW Based Image Processing and Ultrasonic Sensors

Statistical Analysis Of Acoustic Measurements For Assessing Pavement Surface Condition

Pavement Macrotexture Measurement Using Tire/road Noise

Road deformation monitoring and event detection using asphalt‐embedded distributed acoustic sensing (DAS)

Estimation of Pavement Macrotexture by Principal Component Analysis of Acoustic Measurements

A Data-Mining Interpretation Method of Pavement Dynamic Response Signal by Combining DBSCAN and Findpeaks Function

Real-time Assessment of Asphalt Pavement Moduli and Traffic Loads Using Monitoring Data from Built-in Sensors: Optimal Sensor Placement and Identification Algorithm

Real-Time Asphalt Pavement Layer Thickness Prediction Using Ground-Penetrating Radar Based on a Modified Extended Common Mid-Point (XCMP) Approach

Pothole in the Dark: Perceiving Pothole Profiles with Participatory Urban Vehicles.

Development and Preliminary Evaluation of a Varying-Speed Road Profiler

A Parameter Identification Technique for Traffic Speed Deflectometer Tests of Pavements

Overview of the Application of Ground-Penetrating Radar, Laser, Infrared Thermal Imaging, awnd Ultrasonic in Nondestructive Testing of Road Surface

A novel method for evaluating asphalt pavement structural performance based on vehicle vibration