Abstract:This study was carried out to investigate the continuous aqueous pretreatment of sugarcane bagasse (SCB) through twin-screw extrusion for a new integrated full valorization, where the solid residue (extrudate) was used for the production of bio-based materials by thermocompression and the filtrate for the production of high-value-added molecules. Two configurations, with and without a filtration module, were tested and the influence of the SCB composition and structure on the properties of the materials were determined. The impact of the liquid-to-solid (L/S) ratio was studied (0.65–6.00) in relation to the material properties and the biomolecule extraction yield in the filtrate (with the filtration configuration). An L/S ratio of at least 1.25 was required to obtain a liquid filtrate, and increasing the L/S ratio to 2 increased the extraction yield to 11.5 g/kg of the inlet SCB. The extrudate obtained without filtration yielded materials with properties equivalent to those obtained with filtration for L/S ratios of at least 1.25. Since the molecule extraction process was limited, a configuration without filtration would make it possible to reduce water consumption in the process while obtaining high material properties. Under the filtration configuration, an L/S ratio of 2 was the best tradeoff between water consumption, extraction yield, and the material properties, which included 1485 kg/m3 density, 6.2 GPa flexural modulus, 51.2 MPa flexural strength, and a water absorption (WA) and thickness swelling (TS) of 37% and 44%, respectively, after 24 h of water immersion. The aqueous pretreatment by twin-screw extrusion allowed for the overall valorization of SCB, resulting in materials with significantly improved properties compared to those obtained with raw SCB due to fiber deconstruction.

Approach to Renewable Lignocellulosic Biomass Film Directly from Bagasse

Mild Alkaline Pretreatment for Isolation of Native-Like Lignin and Lignin-Containing Cellulose Nanofibers (LCNF) from Crop Waste

A facile method to fabricate sustainable bamboo ethanol lignin/carboxymethylcellulose films with efficient anti-ultraviolet and insulation properties

Preparation of Cellulose Films from Sustainable CO2/DBU/DMSO System

The Full Utilization of Bagasse Via Deep Eutectic Solvent Pretreatment for Low-Condensed Lignin and Cellulose Smart Indicator Film

Homogeneous Transesterification of Sugar Cane Bagasse Toward Sustainable Plastics

A facile route to prepare cellulose-based films

Promoting the Material Properties of Xylan-Type Hemicelluloses from the Extraction Step.

Hemicellulose and Nano/Microfibrils Improving the Pliability and Hydrophobic Properties of Cellulose Film by Interstitial Filling and Forming Micro/Nanostructure

Synthesis and Characterization of Lignin-Incorporated Carboxymethyl Cellulose (CMC) Films from Oil Palm Lignocellulosic Waste

Promotion of Lignin Depolymerization and Cellulose Utilization Via the Coupling Effects of DDQ Pre-Oxidation and HCOOH Extraction

Aqueous Pretreatment of Lignocellulosic Biomass for Binderless Material Production: Influence of Twin-Screw Extrusion Configuration and Liquid-to-Solid Ratio

Homogeneous Modification of Sugarcane Bagasse by Graft Copolymerization in Ionic Liquid for Oil Absorption Application

Water Cast Film Formability of Sugarcane Bagasse Xylans Favored by Side Groups

Generation of lignin and enzymatically digestible cellulose from ethanol-based organosolv pretreatment of sugarcane bagasse

Efficient Preparation of All Cellulose Composite Films Using a Plasticizing-Rolling Method

Enhancing for Bagasse Enzymolysis via Intercrystalline Swelling of Cellulose Combined with Hydrolysis and Oxidation

Tough and Strong All-Biomass Plastics from Agricultural and Forest Wastes via Constructing an Aggregate of Hydrogen-Bonding Networks

Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid.

Obtaining polymeric composite membranes from lignocellulosic components of sugarcane bagasse for use in wastewater treatment

Use of Lignocellulosic Components of Sugarcane Bagasse to Obtaining Polymeric Composite Membranes