Abstract:Single-wall carbon nanotube (SWCNT) thin films are promising for sensitive uncooled infrared detection based on the photothermoelectric effect. The SWCNT film is usually shaped into a belt and diversely doped to form a p-n junction at the center. Under the illumination of a focused incident light, the temperature gradient from the junction to the contacts leads to photoresponse. When the SWCNTs are aligned in one direction, the photoresponse becomes polarization selective. Although a typical bowtie antenna can improve the responsivity and polarization extinction ratio by deep-subwavelength light focusing, the absolute absorptance of the junction region is only 0.6%. In this work, the antenna was engineered for a higher light coupling efficiency. By integrating a bottom metal plane at a specific distance from the SWCNT film and optimizing the antenna geometries, we achieved ultra-efficient impedance matching between the antenna and the SWCNTs, thus the absorptance of the junction region was further enhanced by 21.3 times and reached 13.5%, which is more than 3 orders of magnitude higher than that of the device without the engineered antenna. The peak responsivity was further enhanced by 19.9 times and responsivity reached 1500 V/W at 1 THz. The resonant frequency can be tuned by changing the size of the antenna. Over the frequency range of 0.5 THz to 1.5 THz, the peak responsivity was further enhanced by 8.1 to 19.9 times, and the polarization extinction ratio was enhanced by 2.7 to 22.3 times. The highest polarization extinction ratio reached 3.04 × 105 at 0.5 THz. The results are based on the numerical simulations of the light and the thermal fields.

Ultrabroadband, Lightweight, Flexible, and Polarization Sensitive Photodetector Based on Carbon Nanotube Fibers

Flexible photodetector based on carbon nanotube fibers

Photothermoelectric p-n junction photodetector with intrinsic broadband polarimetry based on macroscopic carbon nanotube films.

High-Performance, Ultra-Broadband, Ultraviolet to Terahertz Photodetectors Based on Suspended Carbon Nanotube Films.

Carbon nanotube terahertz detector.

High-Speed Carbon Nanotube Photodetectors for 2 μm Communications

High-Speed Carbon Nanotube Photodetectors for 2 Μm Communications.

Photodetectors: Room Temperature Broadband Infrared Carbon Nanotube Photodetector with High Detectivity and Stability (Advanced Optical Materials 2/2016)

Carbon Nanotube Arrays Based High-Performance Infrared Photodetector [Invited]

Ultrafast Carbon Nanotube Photodetectors with Bandwidth over 60 GHz

Terahertz detector based on a p-n junction film of aligned carbon nanotubes

A Broadband 3D Microtubular Photodetector Based on a Single Wall Carbon Nanotube-Graphene Heterojunction.

Uncooled Carbon Nanotube Photodetectors

Strain-Engineering-Driven Photomechanical–Photoelectric Coupled Flexible Photodetector Based on Hexagonal Silicon Nanowire Films

Microcavity-Integrated Carbon Nanotube Photodetectors

Carbon Nanotube Far Infrared Detectors with High Responsivity and Superior Polarization Selectivity Based on Engineered Optical Antennas

Bolometric terahertz detection based on suspended carbon nanotube fibers

A fiber-integrated ultrabroadband optical power sensor based on multi-walled carbon nanotubes and U-shaped fiber with bandwidth ranging from 405 nm to 7.767 μ m

Terahertz Photodetector Based on Double-Walled Carbon Nanotube Macrobundle-Metal Contacts.

Strong dark current suppression in flexible organic photodetectors by carbon nanotube transparent electrodes

Silicon Waveguide-Integrated Carbon Nanotube Photodetector with Low Dark Current and 48 GHz Bandwidth.