A Novel Angle-of-Arrival Based Position Estimation Scheme Using Visible Light in Indoor Positioning Systems

yinan hou,xiao shilin,meihua bi,yu zexi,yuankai xue

DOI: https://doi.org/10.1364/ACPC.2014.ATh3A.184

2014-01-01

Abstract:We propose a novel angle-of-arrival (AOA) based indoor positioning scheme using visible light. Simulation results show the mean of AOA estimation error is ∼0.49 degrees and the mean positioning error is ∼2.34 cm.

What problem does this paper attempt to address?

A Visible Light Based Indoor Positioning System

Yiqing Hu,Yan Xiong,Wenchao Huang,Xiang-Yang Li,Yanan Zhang,Xufei Mao,Panlong Yang,Caimei Wang

DOI: https://doi.org/10.48550/arXiv.1505.05977

2015-06-02

Abstract:In this paper, we propose a novel indoor localization scheme that exploits ubiquitous visible lights, which are necessarily and densely deployed in almost all indoor environments. We unveil two phenomena of lights available for positioning: 1) the light strength varies according to different light sources, which can be easily detected by light sensors embedded in COTS devices (e.g., smart-phone, smart-glass and smart-watch); 2) the light strength is stable in different times of the day thus exploiting it can avoid frequent site-survey and database maintenance. Hence, a user could locate oneself by differentiating the light source of received light strength (RLS). However, different from existing positioning systems that exploit special LEDs, ubiquitous visible lights lack fingerprints that can uniquely identify the light source, which results in an ambiguity problem that an RLS may correspond to multiple positions. Moreover, RLS is not only determined by device's position, but also seriously affected by its orientation, which causes great complexity in site-survey. To address these challenges, we first propose and validate a realistic light strength model that can attributes RLS to arbitrary positions with heterogenous orientations. This model is further perfected by taking account of the device diversity, influence of multiple light sources and shading of obstacles. Then we design a localizing scheme that harness user's mobility to generate spatial-related RLS to tackle the position-ambiguity problem of a single RLS, which is robust against sunlight interference, shading effect of human-body and unpredictable behaviours (e.g., put the device in pocket) of user. Experiment results show that our scheme achieves mean accuracy $1.93$m and $1.98$m in office ($720m^2$) and library scenario ($960m^2$) respectively.

Networking and Internet Architecture,Distributed, Parallel, and Cluster Computing
A Novel Three-Dimensional Algorithm Based on Practical Indoor Visible Light Positioning

H-X Zhao,J-T Wang

DOI: https://doi.org/10.1109/jphot.2019.2911738

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:With the increased demand of multiple information, positioning technology raises lots of attention in many fields, including military, emergency assistance, and tracking for vehicles. Because of the limitation of the outdoor positioning technologies in indoor applications, indoor positioning is a new and promising field. At the same time, with light-emitting diodes widely adopted, visible light positioning has become a widely researched technology in indoor positioning. However, the existing methods are based on the supposition that the light for positioning is a particle, without considering the shapes of lights, which causes low accuracy to a certain degree. Therefore, in this paper, an improved algorithm for three-dimensional indoor positioning is proposed. It takes the shapes of the transmitters (lights) into consideration, thus, to ensure high indoor-positioning accuracy. In this study, simulations are conducted under the line of sight and two different kinds of noise, which shows the high accuracy performance of the proposed algorithm.
A High-Precision Indoor Positioning Scheme Based on Feature Code and Lighting Device

Jinghong Yang,Lihui Feng,Pinjing He,Wei Chen,Aiying Yang,Jihua Lu

DOI: https://doi.org/10.1109/jsyst.2022.3176678

IF: 4.802

2022-12-14

IEEE Systems Journal

Abstract:Visible light positioning is one of the schemes based on driving modulation to achieve high accuracy of indoor positioning. However, it has shortcomings in system deployment, maintenance, and scalability, which limits its wide application. We propose a high-precision positioning scheme based on high-transparency feature code and lighting devices. First, a feature-code mask is exploited to replace the driving modulation, which aims to reduce the complexity, improve the scalability, and realize high-precision and real-time positioning. Then, a two-dimensional (2-D) feature code is designed to detect the characteristics, which greatly increases the number of LED IDs and decreases the system complexity. Third, the Levenberg–Marquardt iterative algorithm with the constructed perspective-n-point model is applied to obtain the position of the camera. Experimental results show that the proposed scheme can obtain high-precision and real-time positioning. When the measuring height is 1.6 m, the average root-mean-square error (rmse) is 0.044 m. Moreover, when the height is 1.8 m and 2.0 m, the average RMSEs are 0.054 m and 0.064 m, respectively.

computer science, information systems,telecommunications,engineering, electrical & electronic,operations research & management science
A Novel Method to Estimate the Coordinates of LEDs in Wireless Optical Positioning Systems

Kehan Zhang,Zaichen Zhang,Bingcheng Zhu

DOI: https://doi.org/10.1109/wcsp52459.2021.9613515

2021-10-20

Abstract:Traditional visible light positioning (VLP) systems estimate receivers' coordinates based on the known light-emitting diode (LED) coordinates. However, the LED coordinates are not always known accurately. Because of the structural changes of the buildings due to temperature, humidity or material aging, even measured by highly accurate laser range finders, the LED coordinates may change unpredictably. In this paper, we propose an easy and low-cost method to update the position information of the LEDs. We use two optical angle-of-arrival (AOA) estimators to detect the beam directions of the LEDs. Each AOA estimator has four differently oriented photodiodes (PDs). Considering the additive noises of the PDs, we derive the closed-form error expression for the proposed LED coordinates estimator. Both analytical and Monte Carlo experimental results show that the layout of the AOA estimators could affect the estimation error. These results may provide intuitive insights for the design of the optical indoor positioning systems.
Positioning Error Analysis of Indoor Visible Light Positioning Using Dual Cameras

Haoming Liu,Chen Gong,Jianghua Luo,Zhengyuan Xu

DOI: https://doi.org/10.1109/wcsp.2019.8927927

2019-01-01

Abstract:We analyze the mean squared positioning error of the visible light positioning system with dual cameras. We also build up a experimental system to test the real positioning error. It can be observed that the positioning error along the direction vertical to the line connecting the two cameras is significantly larger than that parallel to such line, and can be well predicted by that from the theoretical analysis. Moreover, we have adopted Gaussian mixture model for the positioning error, which show that two components suffice.
Lightitude: Indoor Positioning Using Ubiquitous Visible Lights and Cots Devices

Yiqing Hu,Yan Xiong,Wenchao Huang,Xiang-Yang Li,Yanan Zhang,Xufei Mao,Panlong Yang,Caimei Wang

DOI: https://doi.org/10.1109/icdcs.2015.82

2015-01-01

Abstract:In this paper, we propose a novel indoor localization scheme, Lightitude, by exploiting ubiquitous visible lights, which are necessarily and densely deployed in almost all indoor environments. Different from existing positioning systems that exploit special LEDs, ubiquitous visible lights lack fingerprints that can uniquely identify the light source, which results in an ambiguity problem that an RLS may correspond to multiple candidate positions. Moreover, received light strength (RLS) is not only determined by device's position, but also seriously affected by its orientation, which causes great complexity in site-survey. To address these challenges, we first propose and validate a realistic light strength model to avoid the expensive site-survey, then harness user's mobility to generate spatial-related RLS to tackle single RLS's position-ambiguity problem. Experiment results show that Lightitude achieves mean accuracy 1.93m and 2.24m in office (720m(2)) and library scenario (960m(2)) respectively.
Indoor Visible Light Positioning with Centimeter Accuracy Based on a Commercial Smartphone Camera.

Jiaojiao Xu,Chen Gong,Zhengyuan Xu

DOI: https://doi.org/10.1109/jphot.2018.2878532

IF: 2.4

2018-01-01

IEEE Photonics Journal

Abstract:We consider indoor positioning based on visible light where the receiver adopts a commercial smartphone camera. We develop a shift rotation model on the receiver movement and further propose a novel indoor positioning algorithm. To achieve high accuracy, a location reference point is set such that the position errors of multiple LEDs have little effect. The algorithm estimates the rotation center in the image instead of treating the image center as the rotation center, leading to reduced positioning error. According to the experimental results, the average positioning error can be reduced to 1 cm, which outperforms the reported experimental results with receiver ceiling distance larger than 2m.
Indoor Visible Light Positioning System Based on Cooperative Localization

Fang Yang,Junnan Gao,Yuanpeng Liu

DOI: https://doi.org/10.1117/1.oe.58.1.016108

IF: 1.3

2019-01-01

Optical Engineering

Abstract:Visible light communication, as a promising future wireless communication technology, has been considered as an attractive solution for indoor positioning systems. An indoor visible light positioning system based on cooperative localization is proposed to support illumination and positioning simultaneously. By cooperation among agents, the positioning system can work in a harsh environment, where a two-light-emitting diodes positioning scheme is proposed as an example specifically. The Bayesian framework and factor graph are introduced to describe the location problems, while the sum-product algorithm is adopted to deal with the positioning process and determine the receivers' location. Moreover, simulations are carried out to demonstrate that the proposed system can achieve centimeter-scale positioning accuracy, and the feasibility is also verified. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License.
Lightitude: Indoor Positioning Using Uneven Light Intensity Distribution.

Yiqing Hu,Yan Xiong,Wenchao Huang,Xiang-Yang Li,Panlong Yang,Yanan Zhang,XuFei Mao

DOI: https://doi.org/10.1145/3214270

2018-01-01

Abstract:In this paper, we propose an indoor positioning system, Lightitude, which utilizes the already existed, uneven indoor light intensity distribution established by densely deployed indoor lights as the medium. As common indoor lights cannot act as landmarks due to lack of unique features (e.g., unique intensity or flicker frequency), systems that exploiting the received light intensity (RLI) usually impose strong constraints on user's motion and make ideal assumptions about the indoor environment. Different from these approaches, we first propose a realistic light intensity model to reconstruct the RLI distribution given any motion (position, orientation) of the receiver, thus RLI collected with every motion of the receiver could be used for positioning. Then we design a particle-filter-based positioning module, which harnesses user's natural mobility to eliminate the ambiguity of a single RLI. Experiment results show that Lightitude achieves mean accuracy 1.93m and 1.98m in an office (720m2) and a library (960m2) respectively. Lightitude is still robust against interferences like sunlight, shading of human-body and several user behaviors.
Indoor Visible Light Positioning System Based on Point Classification Using Artificial Intelligence Algorithms

Qianqian Long,Junyi Zhang,Lu Cao,Wenrui Wang

DOI: https://doi.org/10.3390/s23115224

IF: 3.9

2023-05-31

Sensors

Abstract:In RSSI-based indoor visible light positioning systems, when only RSSI is used for trilateral positioning, the receiver height needs to be known to calculate distance. Meanwhile, the positioning accuracy is greatly affected by multi-path effect interference, with the influence of the multi-path effect varying across different areas of the room. If only one single processing is used for positioning, the positioning error in the edge area will increase sharply. In order to address these problems, this paper proposes a new positioning scheme, which uses artificial intelligence algorithms for point classification. Firstly, height estimation is performed according to the received power data structure from different LEDs, which effectively extends the traditional RSSI trilateral positioning from 2D to 3D. The location points in the room are then divided into three categories: ordinary points, edge points and blind points, and corresponding models are used to process different types of points, respectively, to reduce the influence of the multi-path effect. Next, processed received power data are used in the trilateral positioning method for calculating the location point coordinates, and to reduce the room edge corner positioning error, so as to reduce the indoor average positioning error. Finally, a complete system is built in an experimental simulation to verify the effectiveness of the proposed schemes, which are shown to achieve centimeter-level positioning accuracy.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
High-accuracy Indoor Positioning System Based on Visible Light Communication

Ling Wei,Hongming Zhang,Bingyan Yu,Yang Guan

DOI: https://doi.org/10.1117/1.oe.54.11.110501

IF: 1.3

2015-01-01

Optical Engineering

Abstract:A visible light communication (VLC)-based high-accuracy indoor positioning system is proposed and demonstrated. In this system, the light-emitting diode identification (LED-ID) indicating the position information of the LED can be transmitted to the receiver by the illumination LED through VLC. In the meantime, with the aid of a camera and angular sensors of the mobile device, a coordinate transform can be employed to calculate the relative position between the receiver and the reference LED so that the position of the receiver can be determined. Finally, the experimental results show that 2-cm positioning accuracy can be achieved and the simulation results indicate that the positioning error can be limited within 4.7 cm when the accuracy of angular sensors is 1 deg. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
A Novel Visible Light Positioning System Based on the Dual-LED Anchor

Xiaoxiang Cao,Xuan Wang,Guoliang Chen,Xiansheng Yang

DOI: https://doi.org/10.1109/tim.2023.3259041

IF: 5.6

2023-05-05

IEEE Transactions on Instrumentation and Measurement

Abstract:Recently, indoor localization has played a crucial role in the construction of smart homes, smart buildings, and smart cities. Numerous localization technologies have been investigated, and visible light positioning (VLP) as one of the representative technologies has drawn much attention due to its high accuracy, low cost, and friendly infrastructure. Aiming to solve the prominent issues faced by the traditional VLP ranging-model-based localization method, a phase-difference-based ranging method assisted by a dual-light-emitting diode (LED) anchor was first proposed, which can eliminate the negative influences of hardware heterogeneity, environmental differences, and receiver's inclination angle effectively. The key point of the proposed solution is that we innovatively designed an anchor integrated by two closely spaced LEDs replacing the two separated LEDs for distance calculation, which contributed to avoiding the workload of the ranging model's calibration and the dependence on frequency exchange. Furthermore, a weight matrix was introduced in the final localization to restrain the significant error and increase the confidence coefficient of reliable observations. Finally, a brief analysis of the proposed method's theoretical performance was presented and evaluated by extensive experiments. The proposed method was illustrated to be a very competitive system, which obtained a centimeter-level localization accuracy, and showed more advantages than the traditional ranging method, especially when the photodiode (PD)'s inclination angle is not zero.

engineering, electrical & electronic,instruments & instrumentation
High Accuracy Indoor Visible Light Positioning Considering the Shapes of Illuminators.

Hongxiu Zhao,Jintao Wang,Ruiqi Liu

DOI: https://doi.org/10.1109/bmsb47279.2019.8971950

2019-01-01

Abstract:The indoor visible light positioning (VLP) system is a strong candidate for future indoor positioning solutions with the fast development of visible light communications systems. Most of the VLP algorithms are based on a simple model which considers the illuminator as a dot, ignoring its true geometric shape. Since a lot of illuminators are in different shapes, the VLP algorithms failing to consider the real geometric shapes of illuminators suffer from precision degradation. In this paper, a novel indoor VLP algorithm considering the real geometric shapes of illuminators is proposed. Simulation results cohere with the theoretical analysis demonstrate the precision of the proposed algorithm. The average positioning error of the proposed algorithm is approximately 0.8 cm under noiseless cases, much higher accuracy than the 32 cm average error by VLP algorithms ignoring the true geometric shapes of illuminators.
Positioning Using Visible Light Communications: A Perspective Arcs Approach

Zhiyu Zhu,Caili Guo,Rongzhen Bao,Mingzhe Chen,Walid Saad,Yang Yang

DOI: https://doi.org/10.1109/twc.2023.3247458

IF: 10.4

2023-01-01

IEEE Transactions on Wireless Communications

Abstract:Visible light positioning (VLP) is an accurate indoor positioning technology that uses luminaires as transmitters. In particular, circular luminaires are a common source type for VLP, which are typically treated only as point sources for positioning, while ignoring their geometry characteristics. In this paper, the arc feature of the circular luminaire and the coordinate information obtained via visible light communication (VLC) are jointly used for positioning, and a novel perspective arcs approach is proposed for VLC-enabled indoor positioning. The proposed approach does not rely on any inertial measurement unit and has no tilted angle limitation at the user. First, a VLC assisted perspective circle and arc algorithm (V-PCA) is proposed for a scenario in which a complete luminaire and an incomplete one can be captured by the user. Based on plane and solid geometry theory, the relationship between the luminaire and the user is exploited to estimate the orientation and the coordinate of the luminaire in the camera coordinate system. Then, the pose and location of the user in the world coordinate system are obtained by single-view geometry theory. Considering the cases in which parts of VLC links are blocked, an anti-occlusion VLC assisted perspective arcs algorithm (OA-V-PA) is proposed. In OA-V-PA, an approximation method is developed to estimate the projection of the luminaire’s center on the image and, then, to calculate the pose and location of the user. Simulation results show that the proposed indoor positioning algorithm can achieve a 90th percentile positioning accuracy of around 10 cm. Moreover, an experimental prototype is implemented to verify the feasibility. In the established prototype, a fused image processing method is proposed to simultaneously obtain the VLC information and the geometric information. Experimental results in the established prototype show that the average positioning accuracy is less than 5 cm for different tilted angles of the user.

telecommunications,engineering, electrical & electronic
A Single LED Multi-reception Indoor Visible Light Position System Based on Power Estimation-Angle Algorithm.

Yuanfan Liu,Fumin Wang,Jing Ding,Nan Chi

DOI: https://doi.org/10.1109/ispacs.2018.8923302

2018-01-01

Abstract:In this paper, we propose a new method that using power estimation to calculate the angle between the LED transmitter and the multi-PIN receiver. We simulate the system and compare maximum power estimation and minimum power estimation and realize the precise indoor position the angle within 0.03 radian. We experimentally demonstrate that this method is practical and can be used in future indoor positioning.
An Indoor Positioning Scheme for Visible Light Using Fingerprint Database with Multi-Parameters

CHEN Xiaohong,QIAN Chen,WEI Wei

DOI: https://doi.org/10.3969/j.issn.1673-5188.2017.01.007

2017-01-01

Abstract:This paper proposes a novel indoor positioning scheme based on visible light communication（VLC）.A new indoor VLC positioning scheme using fingerprint database with multi-parameters have been raised.We conduct simulation and experimental research on the illumination intensity distribution of several direction parameters.In the experiment,four LED matrixes are identified by LED-ID with room dimensions of 3.75×4.00×2.7 m~3.The results show that the mean of the location error is 0.22 m in the receiving plane,verifying the correctness and feasibility of the positioning scheme.
A Novel Received Signal Strength Assisted Perspective-three-Point Algorithm for Indoor Visible Light Positioning

Lin Bai,Yang Yang,Chunyan Feng,Caili Guo

DOI: https://doi.org/10.1364/OE.400992

2020-05-21

Abstract:In this paper, a received signal strength assisted Perspective-three-Point positioning algorithm (R-P3P) is proposed for visible light positioning (VLP) systems. The basic idea of R-P3P is to joint visual and strength information to estimate the receiver position using 3 LEDs regardless of the LEDs' orientations. R-P3P first utilizes visual information captured by the camera to estimate the incidence angles of visible lights. Then, R-P3P calculates the candidate distances between the LEDs and the receiver based on the law of cosines and the Wu-Ritt's zero decomposition method. Based on the incidence angles, the candidate distances and the physical characteristics of the LEDs, R-P3P can select the exact distances from all the candidate distances. Finally, the linear least square (LLS) method is employed to estimate the position of the receiver. Due to the combination of visual and strength information of visible light signals, R-P3P can achieve high accuracy using 3 LEDs regardless of the LEDs' orientations. Simulation results show that R-P3P can achieve positioning accuracy within 10 cm over 70% indoor area with low complexity regardless of LEDs orientations.

Signal Processing
Learning-Based Maximum Likelihood Estimator for Angle-of-Arrival Localization

Chengyi Zhou,Meiqin Liu,Senlin Zhang,Ronghao Zheng,Shanling Dong,Zhunga Liu

DOI: https://doi.org/10.1109/tsp.2024.3434979

IF: 4.875

2024-01-01

IEEE Transactions on Signal Processing

Abstract:The estimation of target positions from angle-of-arrival (AOA) measurements has been extensively researched, and various estimators have been proposed to tackle this challenge. Among these, the maximum likelihood estimator (MLE) is notable for its well-recognized properties, including asymptotic unbiasedness and efficiency. However, traditional MLEs, such as the Gauss-Newton algorithm, often encounter difficulties due to the need for a first-order linearization step in computing the Jacobian matrix. This requirement introduces the potential for significant errors and convergence issues, especially in highly nonlinear systems. To overcome this limitation, this paper introduces a learning framework to address the maximum likelihood estimation problem, where the iterative increments are treated as the output of the agent’s actions. Building upon this framework, we develop a learning-based MLE. Comprehensive numerical simulation results demonstrate the effectiveness and superiority of our approach. First, it effectively resolves convergence issues associated with linearization in traditional MLEs. Second, it exhibits robust adaptability by successfully solving both two-dimensional and three-dimensional AOA localization problems. Last, the proposed method significantly enhances localization accuracy compared to existing estimators.
The Stability Optimization of Indoor Visible 3D Positioning Algorithms Based on Single-Light Imaging Using Attention Mechanism Convolutional Neural Networks

Wenjie Ji,Lianxin Hu,Xun Zhang,Jiongnan Lou,Hongda Chen,Zefeng Wang

DOI: https://doi.org/10.3390/photonics11090794

IF: 2.536

2024-08-28

Photonics

Abstract:In recent years, visible light positioning (VLP) techniques have been gaining popularity in research. Among them, the scheme of using a camera as a receiver provides a low-cost, high-precision positioning capability and easy integration with existing multimedia devices and robots. However, the pose changes of the receiver can lead to image distortion and light displacement, significantly increasing positioning errors. Addressing these errors is crucial for enhancing the accuracy of VLP. Most current solutions rely on gyroscopes or Inertial Measurement Units (IMUs) for error optimization, but these approaches often add complexity and cost to the system. To overcome these limitations, we propose a 3D positioning algorithm based on an attention mechanism convolutional neural network (CNN) aimed at reducing the errors caused by angles. We designed experiments and comparisons within a rotation angle range of ±15 degrees. The results demonstrate that the average error for 2D positioning is within 5.74 cm and the height error is within 3.92 cm, and the average error for 3D positioning is within 6.8 cm. Among the four groups of experiments for 3D positioning, compared to the traditional algorithm, the improvements were 7.931 cm, 15.569 cm, 6.004 cm, and 16.506 cm. The experiments indicate that it can be applied to high-precision visible light positioning for single-light imaging.

optics
Image Sensor Based Visible Light Positioning System with Improved Positioning Algorithm

Ran Zhang,Wen-De Zhong,Ke-mao Qian,De-hao Wu

DOI: https://doi.org/10.1109/access.2017.2693299

IF: 3.9

2017-01-01

IEEE Access

Abstract:We optimize an image sensor-based indoor visible light positioning (VLP) system by improving the positioning algorithm. Specifically, we derive a close-form expression to determine the receiver’s position and orientation using the singular value decomposition (SVD) technique, which speeds up the positioning process and enhances the robustness. Simulation results show that the proposed SVD-based noniterative positioning algorithm is 50–80 times faster than the conventional iterative Levenberg–Marquardt-based algorithm and avoids the possible failures caused by the bad initial guesses. Meanwhile, we theoretically investigate the VLP system by deriving the Cramer–Rao lower bound and the root mean square error bound as the positioning accuracy limit and study the impact of system parameters on the positioning error. Finally, we experimentally evaluate the performance of the improved VLP system. It achieves highly robust and fast 3-D positioning with centimeter-level accuracy.

computer science, information systems,telecommunications,engineering, electrical & electronic

A Novel Angle-of-Arrival Based Position Estimation Scheme Using Visible Light in Indoor Positioning Systems

A Visible Light Based Indoor Positioning System

A Novel Three-Dimensional Algorithm Based on Practical Indoor Visible Light Positioning

A High-Precision Indoor Positioning Scheme Based on Feature Code and Lighting Device

A Novel Method to Estimate the Coordinates of LEDs in Wireless Optical Positioning Systems

Positioning Error Analysis of Indoor Visible Light Positioning Using Dual Cameras

Lightitude: Indoor Positioning Using Ubiquitous Visible Lights and Cots Devices

Indoor Visible Light Positioning with Centimeter Accuracy Based on a Commercial Smartphone Camera.

Indoor Visible Light Positioning System Based on Cooperative Localization

Lightitude: Indoor Positioning Using Uneven Light Intensity Distribution.

Indoor Visible Light Positioning System Based on Point Classification Using Artificial Intelligence Algorithms

High-accuracy Indoor Positioning System Based on Visible Light Communication

A Novel Visible Light Positioning System Based on the Dual-LED Anchor

High Accuracy Indoor Visible Light Positioning Considering the Shapes of Illuminators.

Positioning Using Visible Light Communications: A Perspective Arcs Approach

A Single LED Multi-reception Indoor Visible Light Position System Based on Power Estimation-Angle Algorithm.

An Indoor Positioning Scheme for Visible Light Using Fingerprint Database with Multi-Parameters

A Novel Received Signal Strength Assisted Perspective-three-Point Algorithm for Indoor Visible Light Positioning

Learning-Based Maximum Likelihood Estimator for Angle-of-Arrival Localization

The Stability Optimization of Indoor Visible 3D Positioning Algorithms Based on Single-Light Imaging Using Attention Mechanism Convolutional Neural Networks

Image Sensor Based Visible Light Positioning System with Improved Positioning Algorithm