Abstract:Dye-sensitized solar cells (DSSCs) are attractive alternatives to conventional solid-state photovoltaic devices because of performance, stability, environmental compatibility and cost. In contrast to the conventional systems where the semiconductor assumes both the task of light absorption and charge carrier transport, these two functions are separate in DSSC and, therefore, efficiency is very sensitive to the cell structure/composition. High-efficiency DSCs based on mesoporous nanocrystalline titanium dioxide (TiO2) electrodes have received considerable research attention in the past decade. Grain size and thickness of the mesoporous TiO2 film have shown a dominant effect on the efficiency of the photovoltaic devices. We have investigated screen printed TiO2 films deposited on a textured fluorinated SnO2 (FTO) glass substrate, using Raman spectroscopy and spectroscopic ellipsometry. Materials were prepared by repeating a same screen-printing procedure once, twice and three times, using TiO2 paste with 10nm, 20 nm and 200nm particles sequentially. Raman spectra of PV devices cells taken at different excitation (266 nm, 325 nm, 364 nm, 532 nm, 633 nm, and 1064 nm) as well as pure TiO2 oxides are presented. Different excitation wavelengths allow to probe different depth of the sample. It was found that there is strong correlation of the position and the width of E2g mode of anatase at 144 cm-1 and size of TiO2 particles. The samples show that this peak shifts to the high frequency region and becomes broader for small size particles. The position and broadening of the peak can be described by optical confinement model that depends on the size of nano-crystals. Results showed varying grain sizes as correlated with different TiO2 paste applied. Thickness, optical constants and porosity of TiO2 films were determined by spectroscopic ellipsometry. In this work, we have demonstrated the use of Raman Spectroscopy and Spectroscopic Ellipsometry for non-destructive characterization of nanocrystalline TiO2 films for dye-sensitized solar cells.

Growth Of The [110] Orientedtio(2) Nanorods On Ito Substrates By Sputtering Technique For Dye-Sensitized Solar Cells

Structural Modification of TiO2 Nanorod Films with an Influence on the Photovoltaic Efficiency of a Dye-Sensitized Solar Cell (DSSC)

Preparation And Characterization Of Dye-Sensitized Tio2 Nanorod Solar Cells

Sputtered highly ordered TiO 2 nanorod arrays and their applications as the electrode in dye-sensitized solar cells

Growth Of Various Tio2 Nanostructures For Dye-Sensitized Solar Cells

The control of the diameter of the nanorods prepared by dc reactive magnetron sputtering and the applications for DSSC

Solvothermal Growth of Three-Dimensional TiO2 Nanostructures and Their Optical and Photocatalytic Properties

Effect of Hydroxyl on Dye-Sensitized Solar Cells Assembled with TiO 2 Nanorods

Growth of Nanocrystalline Tio2 Films by Pulsed-Laser-Induced Liquid-Deposition Method and Preliminary Applications for Dye-Sensitized Solar Cells

Substrate Placement Angle-Dependent Growth of Dandelion-Like Tio2 Nanorods for Solid-State Semiconductor-Sensitized Solar Cells

Effect of Annealing Temperature on TiO 2 Nanorod Films Prepared by dc Reactive Magnetron Sputtering for Dye-Sensitized Solar Cells

TiO 2 Nanorod Arrays Sensitized with CdS Quantum Dots for Solar Cell Applications: Effects of Rod Geometry on Photoelectrochemical Performance

Growth of TiO2 Nanoflowers Photoanode for Dye-Sensitized Solar Cells

The effect of hydroxyl on dye-sensitized solar cells assembled with TiO2 nanorods

Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

TiO2 nanorod arrays grown from a mixed acid medium for efficient dye-sensitized solar cells

TiO2 nanorods: a facile size- and shape-tunable synthesis and effective improvement of charge collection kinetics for dye-sensitized solar cells.

Blocking Layer Effect on Dye-Sensitized Solar Cells Assembled with Tio2 Nanorods Prepared by Dc Reactive Magnetron Sputtering

Controllable fabrication and modulations on oxide nanotube arrays toward high performance solar cells

Indirect Preparation of Titanium Dioxide Oxidation Plating Layer as Photoelectrode Used in Dye-Sensitized Solar Cells

Characterization of Nano-Crystalline Structure of TiO2 for Dye-sensitized Solar Cells by Raman Spectroscopy and Spectroscopic Ellipsometry