Abstract:China Fusion Engineering Test Reactor (CFETR) is an experimental device of magnetic confinement tokamak fusion reactor that is being designed and developed in China, and the divertor is its important plasma-facing components (PFCs). The basic function of the divertor is to remove heat and impurities. For the CFETR that carries out research on high fusion power, the design of the divertor faces greater challenges: higher requirements for heat removal capacity, higher mechanical properties, requirements for low activation under strong neutron flux radiation, requirements for remote handling (RH) maintenance and lightweight, and a new type of the divertor that can improve the tritium breeding ratio (TBR) of the device. Therefore, the CFETR proposes a divertor-blanket hybrid integrated structure. The divertor eliminates the Cassette support and adopts a separate design. The lower space is occupied by the breeding blanket, and each target is connected with the breeding blanket, respectively. Dome is an essential component of the divertor. In the previous work, the structural design of the Dome is completed using low-activation materials. In order to improve the mechanical properties of Dome, this article has made improvements to the interior of the plasma-facing unit (PFU) and completed thermal-hydraulic analysis to meet the requirement of accommodating steady-state peak heat flux of 10 MW/m $^{2}$ and nuclear heat in the condition of 1.5-GW fusion power. According to the operation parameters of the CFETR, the load of the Dome is studied. According to the above load study, the simulated working conditions of the Dome are summarized and structural analysis is completed. Structural analysis shows that the mechanical properties of the Dome meet the requirements, effectively promoting the processing and manufacturing of the Dome prototype.

Cfd Analysis for the Dome Section of Maanshan Nuclear Power Plant

Development of CFD Methodology for Investigating Thermal-Hydraulic Characteristics in a PWR Dome

CFD analysis for full vessel upper plenum in Maanshan Nuclear Power Plant

Numerical Simulation of Natural Convection Around the Dome in the Passive Containment Air-Cooling System

Experimental and numerical study on the falling film flow process on the outer wall of dome cylinder

Front-Face RH Compatible Structure Design and Thermal Analysis for CFETR Divertor Dome

Study on the Coolant Mixing Phenomenon in a 45° T Junction Based on the Thermal-Mechanical Coupling Method

Cfd Simulation Of Thermal-Hydraulic Characteristics Of Water Seal Structure In Pwr Pressurizer

CFD validation of condensation heat transfer in scaled-down small modular reactor applications, Part 1: Pure steam

Progress, Load Study, and Structural Analysis of the CFETR Divertor Dome

ASEISMIC SAFETY ANALYSIS OF A CONTAINMENT VESSEL MODEL FOR CNP1000 NUCLEAR POWER PLANT

3d Flow Field Analysis For A Traditional Ii Plus Pwr Containment Under Normal Condition

Numerical Simulation of Micro-Crack Leakage on Steam Generator Heat Transfer Tube

Thermal Hydraulic and Stress Coupling Analysis for AP1000 Pressurized Thermal Shock (PTS) Study under SBLOCA Scenario

Thermal and Stress Analysis on the First Wall of Supercritical Pressure Water-cooled Blanket

Three Dimensional Thermal Hydraulic Characteristic Analysis of Reactor Core Based on Porous Media Method

Thermal and Stress Performance Analysis for CLAM As the First Wall Structural Material of Supercritical Water-cooled Blanket

Finite Element Analysis of the Main Reactor Vessel in the China Initiative Accelerator Driven System

CFD Simulation of Thermal Hydraulic Characteristics in a Typical Upper Plenum of RPV

CFD simulation of thermal hydraulic phenomena in enclosed cavity of nuclear power plants

Numerical Investigation on the Thermal Stratification in a Pressurizer Surge Line