Abstract:Objective: Endoscopic measurement mainly depends on visual estimation or open biopsy forceps,which have been proved lacking in accuracy due to the image barrel distortion caused by wide-angle lens in endoscope.This study aimed to validate a new concept of internal proposed by ourselves and develop a new method for endoscopic measurement based on the concept.Methods: We photographed planar grid graphs printed with standard calibrations with an electronic endoscope at different object distances,obtained the information on the virtual internal standard from each photo at the corresponding object distance,and analyzed the digital characteristics of the barrel distortion photos,including the size of the visual field,the image compression ratio,and the credible area for measurement with the virtual internal standard.Based on the analyses,the method of endoscopic measurement by the virtual internal standard was established and experiments both in vivo and in vitro were conducted.Results: The ratio of the object distance to the visual field was 1 ∶ 2 when the former was between 10 mm and 40 mm.Calculation of the compression ratio showed that the credible area of measurement in the central area was 10 mm at the object distance of 10-15 mm,20 mm at 20-30 mm,and 30 mm at 30-50 mm.The credible area of measurement on various planes accounted for 2/5 to 3/5 of the total image width.There was a tendency of double-curve change in the arrangement of pixel values of the central grids on different planes.The differences between the pixel values per centimeter became slight at the object distance of 35-50 mm.Conclusion: Endoscopic measurement by the virtual internal standard is a objective,accurate,simple and practical method.

Design of the New Rigid Endoscope Distortion Measurement System

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Optical Design of Rigid Endoscope with 30° Viewing Angle

Distortion Correction in Surface Defects Evaluating System of Large Fine Optics

Development of an Electronic Target-Type Optical Performance Calibration Device for Medical Rigid Endoscopes

An automatic calibration algorithm for endoscopic structured light sensors in cylindrical environment

A Light Efficiency Uniformity Detection System for Medical Rigid Endoscope Based on Image Processing

Automatic radial distortion correction for endoscope image

Endoscopic Measurement by Virtual Internal Standard: Feasibility and Accuracy

An Endoscope Designed with 3d Measurement Functions

A New Solution for Camera Calibration and Real-Time Image Distortion Correction in Medical Endoscopy–Initial Technical Evaluation

Distortion measurement of CCD imaging system with short focal length and large-field objective

Design of Optical Imaging System with High Resolution,long-Focus,wide Angle and Low Distortion

An EM-Tracked Approach for Calibrating the 3D Pose of Flexible Endoscopes

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

A New Distortion Measurement Technology for Digital Video

Integration Design Of Rigid Endoscope With Different Viewing Angles

Optical Design And Evaluation Of A 4 Mm Cost-Effective Ultra-High-Definition Arthroscope

Distortion Detection of Lithographic Projection Lenses Based on Wavefront Measurement

A New Method for WFOV Camera Distortion Correction

A New Optical Flat Surface Measurement Method Based on Machine Vision and Deflectometry