Polymer Electrolytes Based on Dicationic Polymeric Ionic Liquids: Application in Lithium Metal Batteries

Kun Yin,Zhengxi Zhang,Xiaowei Li,Li Yang,Kazuhiro Tachibana,Shin-ichi Hirano

DOI: https://doi.org/10.1039/c4ta05106h

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:Polymer electrolytes based on dicationic PILs allow successful battery operation at low–medium temperatures (25–40 °C).

What problem does this paper attempt to address?

Liquid-like Poly(ionic Liquid) As Electrolyte for Thermally Stable Lithium-Ion Battery

Zhijun Zhang,Yelong Zhang,Binyang Du,Zhangquan Peng

DOI: https://doi.org/10.1021/acsomega.8b01539

IF: 4.1

2018-01-01

ACS Omega

Abstract:A liquid-like poly(ionic liquid) (PIL) with a very low glass transition temperature of -51 °C and a thermal decomposition temperature of 202.7 °C was synthesized. A PIL-based electrolyte by mixing this poly(ionic liquid) with additives of 10 wt % propylene carbonate and 0.1 M LiClO4 is proved to be an excellent electrolyte for lithium-ion battery. The obtained PIL-based electrolyte exhibits a high ionic conductivity of 8.3 × 10-5 S cm-1 at 25 °C and 2.0 × 10-4 S cm-1 at 60 °C and a wide electrochemical potential window up to 5.61 V at 25 °C and 4.14 V at 60 °C. The Li/LiFePO4 batteries equipped with this PIL-based electrolyte achieve high capacity, outstanding cycling stability and rate capability at 25 °C, and even improved performance at high temperature like 60 °C. Such excellent performances of batteries are attributed to the formation of stable solid-electrolyte interface film at the lithium-electrolyte interface and the stability of electrolyte during cycling.
Preparation of Polymer Electrolytes Based on the Polymerized Imidazolium Ionic Liquid and Their Applications in Lithium Batteries

Mingtao Li,Lu Wang,Tingting Du

DOI: https://doi.org/10.1002/app.40928

IF: 3

2014-01-01

Journal of Applied Polymer Science

Abstract:ABSTRACTThe polymer electrolytes based on a polymerized ionic liquid (PIL) as polymer host and containing 1,2‐dimethyl‐3‐butylimidazolium bis(trifluoromethanesulfonyl)imide (BMMIM‐TFSI) ionic liquid, lithium TFSI salt, and nanosilica are prepared. The PIL electrolyte presents a high ionic conductivity, and it is 1.07 × 10−3 S cm−1 at 60°C, when the BMMIM‐TFSI content reaches 60% (the weight ratio of BMMIM‐TFSI/PIL). Furthermore, the electrolyte exhibits wide electrochemical stability window and good lithium stripping/plating performance. Preliminary battery tests show that Li/LiFePO4 cells with the PIL electrolytes are capable to deliver above 146 mAh g−1 at 60°C with very good capacity retention. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40928.
Polymeric Ionic Liquid–ionic Plastic Crystal All-Solid-state Electrolytes for Wide Operating Temperature Range Lithium Metal Batteries

Xiaowei Li,Zhengxi Zhang,Sijian Li,Kaihua Yang,Li Yang

DOI: https://doi.org/10.1039/c7ta04204c

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:Solid polymer electrolytes show flexible mechanical characters, excellent electrochemical properties, and impressive battery performance over a wide temperature range.
Single Lithium-Ion Polymer Electrolytes Based on Poly(ionic Liquid)s for Lithium-Ion Batteries

Yang Yu,Fei Lu,Na Sun,Aoli Wu,Wei Pan,Liqiang Zheng

DOI: https://doi.org/10.1039/c8sm00907d

IF: 4.046

2018-01-01

Soft Matter

Abstract:A promising method of synthesizing a lithium-containing room temperature polymeric ionic liquid (PIL) by utilizing the zwitterionic effect to turn a lithium salt into a liquid for single lithium-ion conduction was proposed. In this work, the room temperature PIL was constructed by the equimolar monomer mixture of zwitterion 3-(1-vinyl-3-imidazolic)propanesulfonate (VIPS) and 4-styrenesulfnny(trifluoromethylsulfony)imde (LiSTFSI) based on intermolecular electrostatic interactions. In situ photopolymerization with flexible chain poly(ethylene glycol)methyl ether methacrylate (PEGM) and cross-linker poly(ethylene glycol)dimethacrylate (PEGDM) in the presence of propylene carbonate (PC) generated free-standing PIL electrolyte films. The PIL electrolytes with Li+-rich channels have an excellent lithium transference number approaching unity (0.93 at room temperature) while attaining comparable ionic conductivity (σ ≈ 1.31 × 10-4 S cm-1 at 30 °C). The charge-discharge performance of a Li/LiFePO4 half-cell equipped with this PIL electrolyte would provide a promising model system for novel single lithium ion conductors.
An Imidazolium-Based Polymerized Ionic Liquid Via Novel Synthetic Strategy As Polymer Electrolytes for Lithium Ion Batteries

Kun Yin,Zhengxi Zhang,Li Yang,Shin-Ichi Hirano

DOI: https://doi.org/10.1016/j.jpowsour.2014.02.057

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:An imidazolium-based polymerized ionic liquid (PIL), poly(1-ethyl-3-vinylimidazolium bis(trifluoromethanesulfonylimide)) is successfully synthesized via a new three-step process comprising the direct radical polymerization of the 1-vinylimidazole monomer, and subsequent quaternization reaction followed by an anion exchange procedure. Furthermore, polymer electrolytes are prepared by blending as-obtained PIL as the polymer host with an ionic liquid and LiTFSI salt. Electrochemical measurements demonstrate that compared with polymer electrolytes containing the PIL host synthesized by the conventional route, polymer electrolytes containing the PIL host obtained by new synthetic process exhibit significantly improved capacity and cycling performance, which is due to higher ionic liquid content.
In Situ Network Electrolyte Based on a Functional Polymerized Ionic Liquid with High Conductivity toward Lithium Metal Batteries

Yifan Sha,Tianhao Yu,Tao Dong,Xing-long Wu,Haoyu Tao,Haitao Zhang

DOI: https://doi.org/10.1021/acsaem.1c03443

IF: 6.4

2021-12-14

ACS Applied Energy Materials

Abstract:A solid-state electrolyte has attracted great interest on energy storage and conversion, especially for lithium metal batteries (LMBs). However, its practical application is limited by poor ionic conductivity at room temperature and dendrite formation. Herein, a polymerized ionic liquid (PIL)-based solid electrolyte with the structure of a semi-interpenetrating polymer network is designed to enhance the ionic conductivity for LMBs. A one-step in situ cross-link [Vmim1O2][TFSI] is introduced in the poly(vinylidene fluoride)–hexafluoropropylene matrix to fabricate the electrolyte. The obtained solid electrolyte exhibits a high ionic conductivity (1.06 × 10–3 S cm–1 at 25 °C) and a wide electrochemical window (5.50 V vs Li/Li+). The assembled lithium symmetrical cell can maintain a stable voltage range over 1000 h, and the mechanism is confirmed by density functional theory calculations. The employed MD simulations indicate a coordination of the TFSI– anion with both Li+ and the polycation in different systems and demonstrate the feasibility of the Li+ transport improvement based on the PIL. Li/LiFePO4 batteries also show good cycle performance whose reversible capacity is about 153.7 mA h g–1 with 96.53% Coulombic efficiency at 0.1 C and 25 °C. This research shows that this PIL-based solid electrolyte possessed broad application for next-generation LMBs.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Polymerized Ionic Liquids with Guanidinium Cations As Host for Gel Polymer Electrolytes in Lithium Metal Batteries

Mingtao Li,Li Yang,Shaohua Fang,Siming Dong,Shin-ichi Hirano,Kazuhiro Tachibana

DOI: https://doi.org/10.1002/pi.3181

IF: 3.213

2011-01-01

Polymer International

Abstract:Polymerized ionic liquids (PILs) having guanidinium cations with different counter-anions, such as PF6- and N(CF3SO2)(2)(-) (TFSI-), were synthesized by copolymerization of a guanidinium ionic liquid monomer with methyl acrylate followed by an anion exchange reaction. Furthermore, incorporating a guanidinium ionic liquid, LiTFSI salt and nano-size SiO2, a quaternary gel polymer electrolyte based on one of the PILs as the polymer host was prepared. The quaternary gel polymer electrolyte was chemically stable even at a higher temperature of 80 degrees C in contact with the lithium anode. In particular, the electrolyte exhibited high lithium ion conductivity, wide electrochemical stability window and good lithium stripping/plating performance. Li/LiFePO4 batteries with the quaternary gel polymer electrolyte at 80 degrees C had capacities of 140 and 130 mA h g(-1) respectively at 0.1 and 0.2 C current rates. (C) 2011 Society of Chemical Industry
Polymeric Ionic Liquid Membranes As Electrolytes for Lithium Battery Applications

Mingtao Li,Siming Dong,Shaohua Fang,Li Yang,Shin-ichi Hirano,Jiayang Hu,Xinming Huang

DOI: https://doi.org/10.1007/s10800-012-0450-0

IF: 2.925

2012-01-01

Journal of Applied Electrochemistry

Abstract:A new kind of polymeric ionic liquid (PIL) membrane based on guanidinium ionic liquid (IL) with ester and alkyl groups was synthesized. On addition of guanidinium IL, lithium salt, and nano silica in the PIL, a gel PIL electrolyte was prepared. The chemical structure of the PIL and the properties of gel electrolytes were characterized. The ionic conductivity of the gel electrolyte was 5.07 × 10−6 and 1.92 × 10−4 S cm−1 at 30 and 80 °C, respectively. The gel electrolyte had a low glass transition temperature (T g ) under −60 °C and a high decomposition temperature of 310 °C. When the gel polymer electrolyte was used in the Li/LiFePO4 cell, the cell delivered 142 mAh g−1 after 40 cycles at the current rates of 0.1 C and 80 °C.
Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

Furui Ma,Zengqi Zhang,Wenchao Yan,Xiaodi Ma,Deye Sun,Yongcheng Jin,Xiaochun Chen,Kuang He

DOI: https://doi.org/10.1021/acssuschemeng.8b04076

2019-02-01

Abstract:Polymerized ionic liquids (PILs) have several advantages over ionic liquids, such as easy handling, good electrochemical performance, and chemical compatibility. In this research, a solid-state electrolyte composite membrane was successfully fabricated by using an imidazolium-based polymerized ionic liquid as polymer matrix, a kind of porous fiber cloth as rigid frame, and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as lithium salt. The ionic conductivity of the composite electrolyte with 2.0 mol/kg LiTFSI is 7.78 × 10–5 S cm–1 at 30 °C and reaches 5.92 × 10–4 S cm–1 at 60 °C, which is considered a satisfactory value for potential application in lithium-ion batteries. The specific discharge capacity of the LiFePO4/Li cell with as-prepared composite electrolyte is 138.4 mAh g–1, and 90% of the discharge capacity is retained after 250 cycles at 60 °C. In order to further improve the conductivity, Li1.3Al0.3Ti1.7(PO4)3 (LATP) ceramic electrolyte particles are dispersed in a PIL polymer matrix to prepare the PIL-LiTFSI-LATP composite electrolyte. LiFePO4/Li cells using PIL-LiTFSI-LATP (10 wt % LATP) as a solid-state electrolyte exhibit excellent rate performance and high capacity retention (close to 97% after 250 cycles at 60 °C). This work may provide a unique way to prepare a new series of electrolytes for high-performance solid-state lithium batteries.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Dissociating high concentration lithium salts in LLZTO-based high dielectric polymer electrolytes for low temperature Li metal batteries

Jiajun Gong,Zhicheng Yao,Qimin Peng,Huizi Tang,Wenhao Han,Shimou Chen

DOI: https://doi.org/10.1039/d4qm00625a

IF: 8.6834

2024-09-12

Materials Chemistry Frontiers

Abstract:Incorporating high concentrations of lithium salts into solid polymer electrolytes can enhance the electrochemical performance of Li metal batteries. However, this approach is often obstructed by the reduced mechanical properties and limited lithium salt dissociation capacity. To address these challenges, we coupled a rigid inorganic solid electrolyte, Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO), with a high-dielectric-constant polymer, polyvinylidene-trifluoroethylene-trifluoroethylene chloride. The resulting composite solid electrolyte (named PTCL-1.5) significantly improves Li + transport at low temperatures. The assembled Li|PTCL-1.5|Li cell demonstrates remarkable cycling stability, operating for over 4350 hours at −20 °C and 0.1 mA cm −2 . The PTCL-1.5 electrolyte exhibits excellent compatibility with various cathodes. Specifically, the Li|PTCL-1.5|LiNi 0.8 Co 0.1 Mn 0.1 O 2 cell achieves a capacity of 127.69 mA h g −1 at −20 °C, while the Li|PTCL-1.5|LiFePO 4 cell shows exceptional cycle stability, exceeding 750 cycles. Our work offers a promising approach for developing solid-state electrolytes with high electrochemical stability at low temperatures.

materials science, multidisciplinary,chemistry
New polymerized ionic liquid (PIL) gel electrolyte membranes based on tetraalkylammonium cations for lithium ion batteries

Mingtao Li,Bolun Yang,Lu Wang,Ying Zhang,Zhan Zhang,Shaohua Fang,Zhengxi Zhang

DOI: https://doi.org/10.1016/j.memsci.2013.07.007

IF: 9.5

2013-01-01

Journal of Membrane Science

Abstract:New polymerized ionic liquids (PILs) based on tetraalkylammonium cations with N(CF3SO2)2− (TFSI−) anions are synthesized by homopolymerization and anion exchange reaction. Furthermore, a gel polymer electrolyte membrane based on the PILs as polymer host is prepared incorporating a tetraalkylammonium ionic liquid, LiTFSI salt and nano-size SiO2. The gel polymer electrolyte membranes show exceptional thermal and electrochemical properties. They are found to be thermally stable up to 336°C. With the increase of the IL, Tg of the PIL-based electrolyte samples decreases obviously. When the IL concentration is 25wt%, the ionic conductivity of the electrolytes reaches 4.9×10−4Scm−1 at 60°C. After 130 cycles, the Li/LiFePO4 battery with the gel polymer electrolyte membranes at 60°C has discharge capacity of 122mAhg−1 at 0.1 current rates.
Ionic Liquid/Poly(ionic liquid)-based Semi-solid State Electrolytes for Lithium-ion Batteries

Deng-Zhou Zhang,Yong-yuan Ren,Yin Hu,Liang Li,Feng Yan

DOI: https://doi.org/10.1007/s10118-020-2390-1

2020-03-09

Chinese Journal of Polymer Science

Abstract:Ionic liquids (ILs) have appeared as the most promising electrolytes for lithium-ion batteries, owing to their unique high ionic conductivity, chemical stability and thermal stability properties. Poly(ionic liquid)s (PILs) with both IL-like characteristic and polymer structure are emerging as an alternative of traditional electrolyte. In this review, recent progresses on the applications of IL/PIL-based semi-solid state electrolytes, including gel electrolytes, ionic plastic crystal electrolytes, hybrid electrolytes and single-ion conducting electrolytes for lithium-ion batteries are discussed.

polymer science
Ionic Liquid-Based Electrolyte Membranes for Medium-High Temperature Lithium Polymer Batteries

Guk-Tae Kim,Stefano Passerini,Maria Carewska,Giovanni Battista Appetecchi,Giovanni Appetecchi

DOI: https://doi.org/10.3390/membranes8030041

IF: 4.562

2018-07-10

Membranes

Abstract:Li+-conducting polyethylene oxide-based membranes incorporating N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide are used as electrolyte separators for all-solid-state lithium polymer batteries operating at medium-high temperatures. The incorporation of the ionic liquid remarkably improves the thermal, ion-transport and interfacial properties of the polymer electrolyte, which, in combination with the wide electrochemical stability even at medium-high temperatures, allows high current rates without any appreciable lithium anode degradation. Battery tests carried out at 80 °C have shown excellent cycling performance and capacity retention, even at high rates, which are never tackled by ionic liquid-free polymer electrolytes. No dendrite growth onto the lithium metal anode was observed.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Polymeric Ionic Liquid-Plastic Crystal Composite Electrolytes for Lithium Ion Batteries

Xiaowei Li,Zhengxi Zhang,Sijian Li,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1016/j.jpowsour.2016.01.032

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:In this work, composite polymer electrolytes (CPEs), that is, 80%[(1-x)PIL-(x)SNI-20%LiTFSI, are successfully prepared by using a pyrrolidinium-based polymeric ionic liquid (P(DADMA)TFSI) as a polymer host, succinonitrile (SN) as a plastic crystal, and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as a lithium salt. XRD and DSC measurements confirm that the as-obtained CPEs have amorphous structures. The 80%[50%PIL-50%SN]-20%LiTFSI (50% SN) electrolyte reveals a high room temperature ionic conductivity of 5.74 x 10(-4) S cm(-1), a wide electrochemical window of 5.5 V, as well as good mechanical strength with a Young's modulus of 4.9 MPa. Li/LiFePO4 cells assembled with the 50% SN electrolyte at 0.1C rate can deliver a discharge capacity of about 150 mAh g(-1) at 25 degrees C, with excellent capacity retention. Furthermore, such cells are able to achieve stable discharge capacities of 131.8 and 121.2 mAh g(-1) at 0.5C and 1.0C rate, respectively. The impressive findings demonstrate that the electrolyte system prepared in this work has great potential for application in lithium ion batteries. (C) 2016 Elsevier B.V. All rights reserved.
Single-Ion Dominantly Conducting Polyborates Towards High Performance Electrolytes In Lithium Batteries

bingsheng qin,zhihong liu,jie zheng,pu hu,guoliang ding,chuanjian zhang,jianghui zhao,desheng kong,guanglei cui

DOI: https://doi.org/10.1039/c5ta00216h

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A couple of thermally stable polyborate salts, polymeric lithium pentaerythrite borate (PLPB) and polymeric lithium di(trimethylolpropane) borate (PLDB), for applications in lithium ion batteries were synthesized via a facile one-step reaction in aqueous solution. Both the lithium polyborate salts exhibited a high thermal decomposition temperature at about 240 degrees C. Besides, their corresponding single-ion dominantly conducting gel polymer electrolytes of ethylene carbonate (EC) and dimethyl carbonate (DMC) (1 : 1, v/v) swollen PLPB@PVDF-HFP (poly(vinylidenefluoride-co-hexafluoropropene)) and PLDB@PVDF-HFP exhibited favorable ionic conductivity over a wide temperature range, superior electrochemical stability, high lithium ion transference number and Al passivating ability. The Li/LiFePO4 batteries using these single-ion dominantly conducting electrolytes exhibited stable charge-discharge behavior and excellent cycling performance both at room temperature and at elevated temperatures. These superior performances could make this class of gel polymer electrolytes very promising candidates for lithium batteries especially at elevated temperatures.
Solvent-Free Low-Dimensional Polymer Electrolytes For Lithium-Polymer Batteries

Yg Zheng,Jg Lui,G Ungar,Pv Wright

DOI: https://doi.org/10.1002/tcr.20012

2004-01-01

Abstract:The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, in = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type 13) are discussed. However, high ambient conductivities (10(-4)-10(-3) Scm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities greater than or equal toca. 10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces. (C) 2004 The Japan Chemical journal Forum and Wiley Periodicals, Inc.
In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

Dongli Chen,Tao Zhu,Ming Zhu,Peibin Kang,Siqi Yuan,Yongyang Li,Jinle Lan,Xiaoping Yang,Gang Sui

DOI: https://doi.org/10.1002/smtd.202201114

IF: 12.4

2022-11-08

Small Methods

Abstract:Facilitated transportation of Li+ brought superior electrochemical performance, due to enhanced movement of poly‐dioxolane(PDOL) chains and excellent interactions between PDOL and inorganic nanofibers. Safety of lithium metal batteries (LMBs) has been improved by using the solid‐state polymer electrolytes, but the performance of LMBs is still troubled by the poor interface of solid electrolytes/electrodes, leading to insufficient interfacial Li+ transport. Here, a novel ultrathin, robust‐flexible polymeric electrolyte is achieved by in situ polymerization of 1,3‐dioxolane in soft nanofibrous skeleton at room temperature without any extra initiator or plasticizer, leading to the electrolyte with rapid interfacial ion transport. This facilitated Li+ transportation is demonstrated by molecular dynamics simulation. Consequently, the as‐prepared electrolyte exhibits excellent cycling performance. The results indicate that the electrolyte works well in the LiFePO4//Li cell at elevated temperature up to 90 °C, and further matches with the high‐voltage LiNi0.8Mn0.1Co0.1O2 cathode. This study provides an effective approach to constructing a practical polymeric electrolyte for fabrication of safe, high performance LMBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Double-Network Polymer Electrolytes with Ionic Liquids for Lithium Metal Batteries

Chenjing Zhu,Yi Ning,Yizhi Jiang,Guangji Li,Qiwei Pan

DOI: https://doi.org/10.3390/polym14173435

IF: 5

2022-01-01

Polymers

Abstract:Solid-state polymer electrolytes have become promising candidates for high-energy-density lithium metal batteries (LMBs). However, they suffer from low ionic conductivities at room temperature. In this work, two types of composite polymer electrolytes based on a double-network polymer, an ionic liquid (IL) of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (Pyr14TFSI) or 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl) imide (EmimTFSI), and bis(trifluoromethane)sulfonamide lithium salt (LiTFSI) were prepared by a facile one-pot method. The two types of CPEs possess good mechanical properties, excellent thermal stability, and high ionic conductivities greater than 10−4 S cm−1 at 20 °C with 26 wt% IL. The performance diversity of the CPEs was also carefully investigated through a series of electrochemical measurements. Although the CPEs containing EmimTFSI show higher ionic conductivities than those of CPEs with Pyr14TFSI, the latter ones have wider electrochemical stability windows and better resistance to the growth of lithium dendrites. Moreover, CPE with 34 wt% Pyr14TFSI leads to Li/LiFePO4 batteries with favorable rate capability and cycling stability and a columbic efficiency of 98.8% at 20 °C, which suggests that CPEs are promising for practical application in solid-state LMBs.
An interpenetrating network poly(diethylene glycol carbonate)-based polymer electrolyte for solid state lithium batteries

Xiaochen Liu,Guoliang Ding,Xinhong Zhou,Shizhen Li,Weisheng He,Jingchao Chai,Chunguang Pang,Zhihong Liu,Guanglei Cui

DOI: https://doi.org/10.1039/C7TA02423A

2017-01-01

Journal of Materials Chemistry

Abstract:Polycarbonate-based polymer electrolytes possess superior ionic conductivity at room temperature, higher lithium ion transference number and wider electrochemical stability window when compared with conventional poly(ethylene oxide)-based polymer electrolytes. Herein, the poly(diethylene glycol carbonate) dimethacrylate macromonomer (PDEC-DMA) was synthesized and the resultant interpenetrating network IPN-PDEC polymer electrolyte was developed via free radical in situ polymerization for polymer electrolyte Li metal batteries. This IPN-PDEC polymer electrolyte exhibited a decent ionic conductivity of 1.64 × 10−4 S cm−1 at room temperature and a wide electrochemical stability window (up to 4.5 V vs. Li+/Li). The LiFePO4/IPN-PDEC/Li and LiFe0.2Mn0.8PO4/IPN-PDEC/Li cells delivered excellent rate capability and cycling performance at room temperature. An all solid state lithium battery was also demonstrated by applying the as-prepared solid polymer electrolyte (SPE-PDEC) at a temperature of 100 °C, which displayed a superior cycling performance. Therefore, the IPN-PDEC network is a promising polymer electrolyte for solid state lithium batteries.
Novel Polymeric Ionic Liquid Membranes As Solid Polymer Electrolytes with High Ionic Conductivity at Moderate Temperature

Mingtao Li,Li Yang,Shaohua Fang,Siming Dong

DOI: https://doi.org/10.1016/j.memsci.2010.10.004

IF: 9.5

2011-01-01

Journal of Membrane Science

Abstract:A series of guanidinium polymeric ionic liquid (PIL) electrolyte membranes combining different anions, such as BF4−, PF6−, ClO4− and N(CF3SO2)2−, were synthesized through copolymerization and anion exchange reaction as new promising solid polymer electrolytes. The chemical structures of the PILs were characterized by 1H NMR and ATR–FT IR spectra, and their thermal properties, ionic conductivity and electrochemical stability were evaluated, respectively. The PILs present different decomposition temperature and glass transition temperature (Tg), and their thermal properties strongly depend on the sort of anions. The 1g2-MA-BF4 possesses the better thermal stability and it decomposes at 353°C. The 1g2-MA-TFSI shows the lower Tg and it is below −60°C. The ionic conductivity of the PIL electrolytes depends on the lithium salts used and its content. The best ionic conductivity of the PILs electrolyte 1g2-MA-BF4/LiBF4 (30wt%) was 1.35×10−4Scm−1 at 30°C.

Polymer Electrolytes Based on Dicationic Polymeric Ionic Liquids: Application in Lithium Metal Batteries

Liquid-like Poly(ionic Liquid) As Electrolyte for Thermally Stable Lithium-Ion Battery

Preparation of Polymer Electrolytes Based on the Polymerized Imidazolium Ionic Liquid and Their Applications in Lithium Batteries

Polymeric Ionic Liquid–ionic Plastic Crystal All-Solid-state Electrolytes for Wide Operating Temperature Range Lithium Metal Batteries

Single Lithium-Ion Polymer Electrolytes Based on Poly(ionic Liquid)s for Lithium-Ion Batteries

An Imidazolium-Based Polymerized Ionic Liquid Via Novel Synthetic Strategy As Polymer Electrolytes for Lithium Ion Batteries

In Situ Network Electrolyte Based on a Functional Polymerized Ionic Liquid with High Conductivity toward Lithium Metal Batteries

Polymerized Ionic Liquids with Guanidinium Cations As Host for Gel Polymer Electrolytes in Lithium Metal Batteries

Polymeric Ionic Liquid Membranes As Electrolytes for Lithium Battery Applications

Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

Dissociating high concentration lithium salts in LLZTO-based high dielectric polymer electrolytes for low temperature Li metal batteries

New polymerized ionic liquid (PIL) gel electrolyte membranes based on tetraalkylammonium cations for lithium ion batteries

Ionic Liquid/Poly(ionic liquid)-based Semi-solid State Electrolytes for Lithium-ion Batteries

Ionic Liquid-Based Electrolyte Membranes for Medium-High Temperature Lithium Polymer Batteries

Polymeric Ionic Liquid-Plastic Crystal Composite Electrolytes for Lithium Ion Batteries

Single-Ion Dominantly Conducting Polyborates Towards High Performance Electrolytes In Lithium Batteries

Solvent-Free Low-Dimensional Polymer Electrolytes For Lithium-Polymer Batteries

In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

Double-Network Polymer Electrolytes with Ionic Liquids for Lithium Metal Batteries

An interpenetrating network poly(diethylene glycol carbonate)-based polymer electrolyte for solid state lithium batteries

Novel Polymeric Ionic Liquid Membranes As Solid Polymer Electrolytes with High Ionic Conductivity at Moderate Temperature