Abstract:This study proposes the development of a locomotion robot using a deformable dielectric elastomer for actuation without pre-stretch. Electroactive polymers (EAPs) that are driven by electrical stimulation have recently garnered attention. Among EAPs, dielectric elastomer actuators (DEAs) are focused herein. DEAs have a structure wherein a dielectric is sandwiched between elastic electrodes. The performance of the DEA depends on the relative permittivity, Young's modulus, and the applicable voltage of the dielectric material. DEAs are usually used with pre-stretching, because of the material properties of the dielectric, which requires a large stress in the initial stage of extension, and the increase in the displacement of DEAs with the application of pre-stretch. However, because rigid frames are generally used for prestretching, there are few DEA applications that utilize their flexibility. Therefore, we focused on slide-ring materials (SRMs) as new dielectric materials. SRMs are polymer materials in which the cross-linking points move freely, and having excellent properties as dielectrics for DEA applications. Thus, pre-stretching is not required, and applications utilizing the flexibility of DEAs is possible. In previous research, a bending unit that did not require pre-stretching was manufactured by attaching non-stretchable tape to one side of the DEA using an SRM as the dielectric material. In addition, a locomotion robot with a bending unit was developed, and it was confirmed that the robot achieved locomotion because of a phase difference between the units. However, the basic characteristics of the bending unit and locomotion robot were not discussed. Therefore, in this research, we measured the frequency characteristics of the bending unit alone and demonstrated the locomotion of the robot.

Implementation and Application of a 2-Dof Dielectric Elastomer Actuator

Analysis and Application of a Rolled Dielectric Elastomer Actuator with Two Degrees of Freedom

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Modelling and Control of a Dielectric Elastomer Actuator

Modelling and Control of a Novel Soft Crawling Robot Based on a Dielectric Elastomer Actuator.

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Electromechanical Model-Based Adaptive Control of Multilayered Dielectric Elastomer Bending Actuator

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

A Multi-electrode Electroelastomer Cylindrical Actuator for Multimodal Locomotion and Its Modeling

Dielectric Elastomer Spring-Roll Bending Actuators: Applications in Soft Robotics and Design

A Worm-Like Biomimetic Crawling Robot Based on Cylindrical Dielectric Elastomer Actuators

Development of a locomotion robot using deformable dielectric elastomer actuator without pre-stretch

Dielectric Elastomer Bending Actuator: Experiment and Theoretical Analysis

Modeling and Characterizing Two Dielectric Elastomer Folding Actuators for Origami-Inspired Robot

Bio-inspired Annelid Robot: a Dielectric Elastomer Actuated Soft Robot

Design of Translational and Rotational Bistable Actuators Based on Dielectric Elastomer

Parameters Design of the Dielectric Elastomer Spring-Roll Bending Actuator (conference Presentation)

Inhomogeneous deformation of circular dielectric elastomer: simulation and experiment

Automatic Design of Dielectric Elastomer-Based Crawling Robots Using Shape and Topology Optimization