Abstract:Two kinds of phosphorus containing porous organic polymers (PPOPs) were synthesized through the Friedel-Crafts reaction between triphenylphosphine oxide and 4,4'-bis(chloromethyl)-1,1'-biphenyl (PPOP1) or alpha,alpha'-dibromo-p-xylene (PPOP2), where PPOPs were applied to improve the flame retardancy and physical properties of epoxy resin (EP). The PPOPs show high thermal stability, poor combustion properties, and large BET specific surface areas. The average pore diameter is 3.7 nm and 3.5 nm for PPOP1 and PPOP2, respectively. Monomers of EP can effectively diffuse into the pores of PPOPs, and PPOP/EP composites were further prepared by in situ polymerization. With only 1 wt% PPOP1 loaded into the composites, T-g values increase from 114 degrees C to 117 degrees C, while tensile strength and flexural modulus increase by 32% and 21%, respectively, resulting from the rigid skeleton of PPOPs and the interpenetrating polymer network structure in the composites. The dielectric constant and loss also decrease with the addition of PPOPs into the EP matrix. Cone calorimeter experiments show that PPOPs exert excellent flame retardancy on the EP matrix. In comparison with pure EP, when loading 5 wt% PPOP2, peak heat release rate, total heat release and total smoke production decrease by 26%, 48% and 39%, respectively. The PPOP/EP composites show higher tensile strength, T-g and flame retardancy than the samples prepared by simply blending the same amount of PPOPs into the EP matrix. Our research provides a promising strategy to prepare flame retardant EP composites with high performances. (C) 2020 Elsevier Ltd. All rights reserved.

POSS-functionalized polyphosphazene nanotube: preparation and effective reinforcement on UV-curable epoxy acrylate nanocomposite coatings

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Preparation of UV-curable Functionalized Phosphazene-Containing Nanotube/polyurethane Acrylate Nanocomposite Coatings with Enhanced Thermal and Mechanical Properties

Thermal and Dynamic Mechanical Properties of Epoxy Resin/poly(urethane‐imide)/polyhedral Oligomeric Silsesquioxane Nanocomposites

Nanostructures and surface dewettability of epoxy thermosets containing hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane-capped poly(ethylene oxide).

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

Synthesis of novel epoxy-group modified phosphazene-containing nanotube and its reinforcing effect in epoxy resin

High-performance carbon fiber-reinforced epoxy resin composites based on novel, environmentally friendly, stability, and heat-moisture resistant nano emulsion encapsulated POSS sizing agent interface modification

A 3-D nanostructure polyhedral oligomeric silsesquioxane as a (co)-crosslinker of an epoxy resin

Controllable confinement nano-reinforced organic-inorganic cyanate ester resin with optimal modulus and dielectric properties trade-offs

POSS-bound ZnO Nanowires As Interphase for Enhancing Interfacial Strength and Hydrothermal Aging Resistance of PBO Fiber/epoxy Resin Composites

Formation of a Carbon Fiber/polyhedral Oligomeric Silsesquioxane/carbon Nanotube Hybrid Reinforcement and Its Effect on the Interfacial Properties of Carbon Fiber/epoxy Composites

Fabrication, Flame Retardancy and Physical Properties of Phosphorus Containing Porous Organic Polymers/epoxy Resin Composites

Multifunctional Properties of Polyhedral Oligomeric Silsesquioxanes (POSS)-Based Epoxy Nanocomposites

Study of the Preparation and Properties of Pbt/Epoxy/Sio2 Nanocomposites

Amino-functionalized Carbon Nanotubes/polyphosphazene Hybrids for Improving the Fire Safety and Mechanical Properties of Epoxy

The Effective Reinforcements of Functionalized Mos2 Nanosheets in Polymer Hybrid Composites by Sol-Gel Technique

A Facile Approach to Prepare Phosphorus and Nitrogen Containing Macromolecular Covalent Organic Nanosheets for Enhancing Flame Retardancy and Mechanical Property of Epoxy Resin

Novel polyurethane networks based on hybrid inorganic/organic phosphazene-containing nanotubes with surface active hydroxyl groups