Abstract:The development of lithium−sulfur batteries has become an important area of research to meet the growing demand of modern society for energy-storage devices as sulfur cathode is benefited from the excellent theoretical capacity of 1672 mAh g− 1, low cost, abundant reserves, and environmental benignity. However, its practical application is strongly impeded by the sluggish kinetics of sulfur redox within aprotic electrolytes and the shuttle effect of soluble intermediate polysulfides. The incompatibility between highly polar polysulfides and conventional carbonaceous conductive substrates is believed to be the main reason for both unfavorable redox activity and polysulfide “flooding”.1 Here two host materials for sulfur cathodes beyond typical nanocarbon are presented. (1) Nitrogen-doped carbon nanotubes were employed to build sulfur composite cathodes and to examine the heteroatom-doping effect on the sulfur electrochemistry. The electrochemical measurements combined with ab initio calculation validated an enhanced capacity of 1370 mAh g− 1 at 0.1 C, over eight-times extended cyclic life, and reduced polarization via only 1.8 % nitrogen incorporation.2 (2) The sulfiphilic surface properties of bulk cobalt disulfide (CoS2) was demonstrated by static adsorption and theoretical calculation. Further hybridization of 15 % CoS2 with graphene demonstrated a high capacity of 1368 mAh g− 1 at 0.5 C, low decay rate of 0.034% over 2000 cycles at 2.0 C, and 10 % increase in energy efficiency. More importantly, the electrocatalytic effect on liquid−liquid polysulfide redox was first verified by assembling symmetric cells.3The two surface-chemistry-initiated design is believed to bring new opportunity to propel the development of advanced sulfur lithium−sulfur batteries as well as other novel energy storage devices. References: Peng, H.-J.; Zhang, Q. Angew. Chem. Int. Ed. 2015, 54, 11018–11020 Peng, H.-J.; Hou, H.-Z.; et al. Adv. Mater. Interfaces 2014, 1, 1400227 Yuan, Z.; Peng, H.-J.; et al. Nano Lett. 2016, doi: 10.1021/acs.nanolett.5b04166

The Formation of Strong-Couple Interactions Between Nitrogen-Doped Graphene and Sulfur/lithium (poly)sulfides in Lithium-Sulfur Batteries

Selective Adsorption and Electrocatalysis of Polysulfides Through Hexatomic Nickel Clusters Embedded in N-Doped Graphene Toward High-Performance Li-S Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

TiN nanocrystal anchored on N-doped graphene as effective sulfur hosts for high-performance lithium-sulfur batteries

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Strongly Coupled W2c Atomic Nanoclusters On N/P-Codoped Graphene For Kinetically Enhanced Sulfur Host

Facilitation of sulfur evolution reaction by pyridinic nitrogen doped carbon nanoflakes for highly-stable lithium-sulfur batteries

Conductive Mesoporous Niobium Nitride Microspheres/Nitrogen-Doped Graphene Hybrid with Efficient Polysulfide Anchoring and Catalytic Conversion for High-Performance Lithium-Sulfur Batteries.

Single Nickel Atoms on Nitrogen‐Doped Graphene Enabling Enhanced Kinetics of Lithium–Sulfur Batteries

A High‐energy‐density Long‐cycle Lithium–sulfur Battery Enabled by 3D Graphene Architecture

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen-Doped Carbon Enables High-Performance Lithium-Sulfur Battery Cathodes

Polarity-induced precipitation of S/Li2S confined into N and S co-doped porous graphene layered matrix for lithium sulfur batteries

Integration of nickel phosphide nanodot-enriched 3D graphene-like carbon with carbon fibers as self-supported sulfur hosts for advanced lithium sulfur batteries

Carbon Nanotube-Connected Yolk–Shell Carbon Nanopolyhedras with Cobalt and Nitrogen Doping As Sulfur Immobilizers for High-Performance Lithium–Sulfur Batteries

Design Rules of Heteroatom-Doped Graphene to Achieve High Performance Lithium-Sulfur Batteries: Both Strong Anchoring and Catalysing Based on First Principles Calculation

Mesoporous Niobium Nitride Nanowires Encapsulated in Carbon for High-Performance Lithium–Sulfur Batteries

Vanadium Nitride Quantum Dots/Holey Graphene Matrix Boosting Adsorption and Conversion Reaction Kinetics for High-Performance Lithium–Sulfur Batteries

Surface-Chemistry-Initiated Design of Host Materials for Sulfur Cathodes: from Nitrogen-Doped Carbon to Sulfiphilic Cobalt Disulfide

Highly Dispersed Cobalt Clusters in Nitrogen‐Doped Porous Carbon Enable Multiple Effects for High‐Performance Li–S Battery

Single-atom Fe and N co-doped graphene for lithium-sulfur batteries: a density functional theory study

Three-Dimensionally Ordered Macro/Mesoporous Nb2O5/Nb4N5 Heterostructure as Sulfur Host for High-Performance Lithium/Sulfur Batteries