Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

Quasi-hydrostatic Limit of LiF As a Pressure Transmitting Medium and Its Equation of States

Quasi-isentropic compression of LiH above 400 GPa using magnetocumulative generator

Compression and Phase Diagram of Lithium Hydrides at Elevated Pressures and Temperatures by First-Principles Calculation

Ab initio calculations of elastic constants and thermodynamic properties of Li2O for high temperatures and pressures

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

The 25th International Federation for Heat Treatment and Surface Engineering Congress (IFHTSE '18)

Refractive index of lithium fluoride to 900 gigapascal and implications for dynamic equation of state measurements

Velocity and Stability of Condensed Polymorphic SiH4: A High-Temperature High-Pressure Brillouin Investigation*

Brillouin Scattering Study of Liquid Methane under High Pressures and High Temperatures

Electronic Structure of LLM-105 Crystal under High Pressure and Low Temperature

Brillouin Scattering Studies Of Liquid Argon At High Temperatures And High Pressures

High Temperatures and High Pressures Brillouin Scattering Studies of Liquid H2O+CO2 Mixtures

Elastic Properties Of Single Crystal Hydrogen Sulfide: A Brillouin Scattering Study Under High Pressure-Temperature

First Principles Investigation of Structural Stability and Electronic and Optical Properties of Lif and Naf under High Pressure

Thermal Equations of State and Melting of Lithium Deuteride under High Pressure

Confirmation of the Structural Phase Transitions in Xef2 under High Pressure

Equation of state of LiNi0·5Mn1·5O4 at high pressure

Strength and Equation of State of Fluorite Phase Ceo2 under High Pressure

Structural, mechanical properties, and vibrational spectra of LLM-105 under high pressures from a first-principles study

Equation Of State Of Solid Hydrogen And Deuterium From Single-Crystal X-Ray-Diffraction To 26.5 Gpa

Pressure induced ferroelastic phase transition in LuLiF4 compound