Abstract:This paper reports new developments in in situ U–Pb zircon geochronology using 266 and 213 nm laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). Standard spot ablation (spot diameters 40–80 μm) was employed, with no sampling strategies employed specifically to minimise elemental fractionation. Instead, He ablation gas and carefully replicated ablation conditions were employed to maintain constant ablation-related elemental fractionation of Pb and U between analyses. Combining these strategies with calibration on a new zircon standard (GJ-1) allows elemental fractionation and instrumental mass bias to be corrected efficiently, and accurate 206Pb/238U and 207Pb/235U ratios to be measured with short-term precision (2 r.s.d.) of 1.9% and 3.0%, respectively. Long-term precision (2 r.s.d.) of the technique (266 nm ablation), based on 355 analyses of the 91500 zircon (1065 Ma) standard over more than a year, was 3.8%, 4.0% and 1.4% for the 206Pb/238U, 207Pb/235U and 207Pb/206Pb ratios, respectively. Long-term precision (2 r.s.d.) for the 206Pb/238U, 207Pb/235U and 207Pb/206Pb ratios of the Mud Tank zircon (732 Ma) was 3.9%, 4.1% and 1.7%, respectively (359 analyses). Selective integration of time-resolved signals was used to minimise the effect of Pb loss and common Pb enrichments on the measured ages. The precision and accuracy of our data compare very favourably with those obtained using more involved procedures to correct or minimise ablation- and ICP-MS-induced biases. 213 nm laser ablation produced comparable precision to 266 nm ablation using generally smaller spot sizes (40–50 vs. 60–80 μm), and offered significant advantages in terms of ablation duration and stability, particularly for small zircons (<60 μm). For the 91500 zircon, but not the Mud Tank zircon, 213 nm ablation also produced significantly older and more accurate Pb/U ages. This suggests that shorter wavelength ablation may have reduced a matrix-dependent elemental fractionation difference between sample and standard. The accuracy and precision of the technique for young zircons are demonstrated by analysis of three zircon populations ranging in age from 417 to 7 Ma. In each case, the zircons have yielded concordant ages or common Pb discordia which give concordia intercept ages that are in agreement with independently determined ages for the same samples. Application of Tera–Wasserburg diagrams [Earth Planet. Sci. Lett. 14 (1972) 281] was found to be the most useful approach to handling common Pb contributions that were not removed by selective integration of signals.

Precision of in Situ Isotope Ratio Measurements by Lam-Mc-Icpms

Improved in situ Sr isotopic analysis by a 257 nm femtosecond laser in combination with the addition of nitrogen for geological minerals

The application of laser ablation-inductively coupled plasma-mass spectrometry to in situ U–Pb zircon geochronology

High‐Resolution In Situ Fe Isotope Measurements of Silicate Minerals and Glasses by Femtosecond Laser Ablation MC‐ICP‐MS

Optimization of analytical conditions for precise and accurate isotope analyses of Li, Mg, Fe, Cu, and Zn by MC-ICPMS

In Situ Carbon Isotope Analysis by Laser Ablation MC-ICP-MS.

Excimer laser isotope-ratio-monitoring mass spectrometry for in situ oxygen isotope analysis

Precise measurement of stable potassium isotope ratios using a single focusing collision cell multi-collector ICP-MS

Simultaneously In-Situ Analysis of Trace Elements and U-Pb and Pb-Pb Ages for Single Zircons by Laser Ablation Microprobe-Inductively Coupled Plasma Mass Spectrometry

High-precision in Situ Silicon Isotopic Analyses by Multi-Collector Secondary Ion Mass Spectrometry in Olivine and Low-Calcium Pyroxene

LA-ICP-MS ANALYSIS OF TRACE ELEMENTS IN SILICATE MINERALS ON ICP-MS NEXION 300S MASS SPECTROMETER WITH NWR 213 ATTACHMENT FOR LASER ABLATION: METHODOLOGICAL ASPECTS

Accurate measurement of K/Ca in low‐[K] carbonate samples using laser‐ablation sector‐field inductively coupled plasma mass spectrometry

Interlaboratory Comparison of Magnesium Isotopic Compositions of 12 Felsic to Ultramafic Igneous Rock Standards Analyzed by MC‐ICPMS

Uranium and Thorium Isotopic and Concentration Measurements by Magnetic Sector Inductively Coupled Plasma Mass Spectrometry

High-Precision Measurements of 44ca/40ca Using Multiple-Collector Inductively Coupled Plasma Mass Spectrometry Without Collision-Cell Technology.

High precision potassium isotope analysis of geological samples using MC-ICP-MS

High-precision Mg isotope analyses of low-Mg rocks by MC-ICP-MS

Precise Carbon Isotopic Ratio Analyses of Micro Amounts of Carbonate and Non-Carbonate in Basalt Using Continuous-Flow Isotope Ratio Mass Spectrometry

Prospect of High Precision Mass Spectrometer in Isotope Geochemistry

In situ calcite U−Pb geochronology by high-sensitivity single-collector LA-SF-ICP-MS

Methods of laser-based stable isotope measurement applied to diagenetic cements and hydrocarbon reservoir quality