Applying Filtering Techniques to Improve GPS Positioning Accuracy

Shufeng Han,Qin Zhang,Hyun Kwon Noh
DOI: https://doi.org/10.13031/2013.4121
2001-01-01
Abstract:A Kalman filter was developed to improve the DGPS position estimates in non- stationary applications. Applying Kalman filtering to the raw DGPS measurement data could effectively remove the DGPS position noise and reduce the standard deviation of the positioning error. In our parallel tracking study, the maximum cross-tracking error (XTE) was reduced from 9.83 m to 2.76 m by the Kalman filtering. The Kalman filter also reduced the standard deviation of the XTE from 0.33 m to 0.30 m. The performance of the Kalman filter was compared to that of a mean filter. It was found that the Kalman filter had much smaller positioning error than the mean filter in the direction of travel. In our study, the average positioning errors in the direction of travel were 1.35 m for the mean filter, and 0.20 m for the Kalman filter. The GPS bias error was found to be the major source of the cross-tracking error. Further study is needed to estimate and reduce the GPS bias error for parallel tracking applications.
What problem does this paper attempt to address?