Abstract:Reversible metal electrodeposition (RME) windows are a promising material for electrochromic windows and electronic display applications. However, the lifetime of RME devices is a major drawback in the preparation of commercial and practical devices. In this study, we propose a new strategy to prolong the stability and improve the efficiency of RME devices. By using tungsten oxide, a well-known electrochromic material, to modify the surface of a transparent conductive electrode, superior, stable, and highly effective devices were prepared successfully. By applying a low potential of − 0.8 V to 0.5 V, the RME device can quickly switch between a bleached state and colored state with different colors changing from transparent to black and deep blue. The performance improvement of the RME device can be explained by the simultaneous reduction of tungsten oxide and metal ion deposition in the conductive substrate under an applied potential. Furthermore, the lifetime of the device increased significantly (over 1500 cycles) owing to the shielding role of tungsten oxide film in the acid medium, which is an indispensable component of reversible electrochromic devices.Graphic AbstractRecently, reversible metal electrochromic (RME) windows are promising electrochromic device (ECD) due to simple process, low cost, and fast response. However, the main drawback of RME devices is their instability caused by the erosion of conductive electrode in an electrolyte-acidic medium. Therefore, developing stable, effective, and noble-metal-free RME devices is a tough challenge in the development of ECDs. In this study, a well-known electrochromic material, tungsten oxide (WO3), was successfully employed to modify the surface of a transparent conductive electrode (TCE)-the indispensable part for ECDs, which plays an important role as a shield of TCE electrode. ECD fabricated using WO3 modified TCE had an extremely prolonged lifetime (over 1500 cycles) compared with ECD prepared by using bare TCE. The efficiency of ECD also increased significantly owing to the electrochromic performance of WO3 that took place simultaneously with reversible metal deposition in the redox process. Therefore, WO3 modified conductive electrodes are a great candidate for enhancing the performance of ECD.

Electro-Deposited Vanadium Oxide As A Counter-Electrode for Pprodot-Me-2 Based Electrochromic Devices (Ecds)

Study and Fabrication of V2O5 in Electrochromic Devices

Electrochromism of titanium oxide thin films

Blue/green-to-transmissive Electrochromic-Supercapacitor Bifunctional Polymer Films Via Electropolymerization Containing 3,4-Propylenedioxythiophene Derivatives As Novel Donor Units

Divalent Viologen Cation‐Based Ionogels Facilitate Reversible Intercalation of Anions in PProDOT‐Me2 for Flexible Electrochromic Displays

An Electrochromic Copolymer Based on Pyrrole and 3,4-Ethylenedioxythiophene Electrodeposited in Aqueous Micellar Solution

Electrochromic performance and potential stability of sputtered V2O5 film for a complementary inorganic all-solid-state electrochromic device

Macroporous Vanadium Oxide Ion Storage Films Enable Fast Switching Speed and High Cycling Stability of Electrochromic Devices.

Cyanophenol and benzyl phosphonic acid grafted electrodes for poly(butyl viologen) thin film-based electrochromic device

4-(Trifluoromethoxy)phenyl-Containing Polymers as Promising Anodic Materials for Electrochromic Devices

Studies on transmittance modulation and ions transfer kinetic based on capacitive-controlled 2D V 2 O 5 inverse opal film for electrochromic energy storage application

Pseudocapacitive porous amorphous vanadium pentoxide with enhanced multicolored electrochromism

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Vanadium-Substituted Dawson-Type Polyoxometalate–TiO2 Nanowire Composite Film as Advanced Cathode Material for Bifunctional Electrochromic Energy-Storage Devices

Tungsten Oxide-Modified ITO Electrode for Electrochromic Window Based on Reversible Metal Electrodeposition

Electrochromic Polymers Based on 1,4-Bis((9H-carbazol-9-yl)methyl)benzene and 3,4-Ethylenedioxythiophene Derivatives as Promising Electrodes for Flexible Electrochromic Devices

Electropolymerization of an EDOT-Quinoxaline Monomer for Green Electrochromic Thin Films and Devices

Electrosynthesis of Electrochromic Polymer Membranes Based on 3,6-Di(2-thienyl)carbazole and Thiophene Derivatives

Preparation and characterization of molybdenum trioxide/poly(3,4-ethylenedioxythiophene): Polystyrene sulphonate nanocomposites for electrochromic application.

Solution-Processed Interfacial PEDOT:PSS Assembly into Porous Tungsten Molybdenum Oxide Nanocomposite Films for Electrochromic Applications

A study of an electrochromic device based on Ni(OH)2/PVA film with the mesh-like silver counter electrode