Abstract:In this work, we present a numerical framework for non-isothermal compositional compressible gas-water phase flow simulations in non-fractured and fractured porous media on structured and unstructured meshes. The framework is implemented as the simulator "DMflow". The discretization of the mass conservation equations is based on the fully-implicit scheme and cell-centered finite-volume control-volume distributed multipoint flux approximation (CVD-MPFA) coupled with a lower dimensional fractured model. Similarly, the discretization of the energy equation is also based on the same method. The recent newly developed enthalpy model of CO2−CH4-H2S-N2-O2-brine system (Guo et al., 2019), which is validated within a wide temperature and pressure range, is used in the energy equation. Here, we present a sequential implicit method for the non-isothermal flow and avoid the simultaneous solution of the fluid flow primary variables and the temperature. We present the validation cases where the 1D and 2D results for non-isothermal carbon dioxide (CO2) injection into water obtained by the new implemented numerical framework are in agreement with the CMG-GEM. The simulation results of the injection of the CO2 into an aquifer shows the robustness of the method to produce gas phase behavior and temperature distribution in agreement with the literature. We also present a simulation case to demonstrate the capability of our simulator to model non-isothermal CO2 injection process into a fractured water saturated reservoir using an unstructured grid. The method is also then applied to simulate and compare the isothermal and the non-isothermal cases of injection of pure CO2 and impure CO2 into water reservoir with heterogeneity in porosity and permeability.

An Integrated Partially Implicit Compositional Simulator for Naturally Fractured Reservoirs

Development, Analysis And Numerical Tests Of A Compositional Reservoir Simulator

Model Formulation for Compositional Numerical Simulation of CO2 Flooding in Fractured Reservoirs

A Practical Compositional Method for Simulation of CO2 Flooding in Porous and Fractured Petroleum Reservoirs

A Dual-Grid, Implicit, and Sequentially Coupled Geomechanics-and-Composition Model for Fractured Reservoir Simulation

A Modified Sequential Method for Solving the Full Composition Model in Numerical Reservoir Simulation

A Scalable Parallel Compositional CO2 Geological Storage Simulator

Adaptive Fully Implicit Simulator with Multilevel Schwarz Methods for Gas Reservoir Flows in Fractured Porous Media

Parallel Reservoir Simulators for Fully Implicit Complementarity Formulation of Multicomponent Compressible Flows.

A MODIFIED SEQUENTIAL FULLY IMPLICIT METHOD OF COMPOSITIONAL RESERVOIR SIMULATION FOR CO2 FLOODING IN ADAPTIVE MESH REFINEMENT GRIDS

Higher-Order Compositional Modeling of Three-phase Flow in 3D Fractured Porous Media Using Cross-flow Equilibrium Approach

A Fully Implicit Constraint-Preserving Simulator for the Black Oil Model of Petroleum Reservoirs

A Hybrid Numerical Model for Coupled Hydro-Mechanical Analysis During CO2 Injection into Heterogeneous Unconventional Reservoirs

Smooth Formulation for Isothermal Compositional Simulation with Improved Nonlinear Convergence

A Scalable Parallel In-Situ Combustion Reservoir Simulator for Large Scale Models

A New Mathematical Formulation of the Governing Equations for the Chemical Compositional Simulation

A New In-Situ Combustion Simulator for Parallel Computers

Sequential coupling of thermal module into the reservoir simulator DMflow

A hybrid stability analysis bypassing method for compositional simulation

Development of a Fully Implicit Simulator for Surfactant-Polymer Flooding by Applying the Variable Substitution Method

A General Framework Model for Fully Coupled Thermal-Hydraulic-Mechanical Simulation of CO2 EOR Operations