Abstract:Rapidly developing thin-film solar cells prompts the demand for artificial narrow-band spectral illumination. Here, an LED-based compact spherical cap solar simulator is proposed to provide multiple independent color channels, while compatible with the traditional broadband IEC60904-9 standard in terms of illumination non-uniformity, stability and solar-like spectrum. Firstly, a one-dimensional model is established and then validated to analyze locations of maximum power point which may degenerate the spatial homogeneity. Secondly, the LED layout is optimized by Monte Carlo ray tracing, and it is found that a good illumination uniformity can be achieved if they are rotational symmetrically distributed. Thirdly, another two structural parameters, including output slot size and cavity height, are simulated to balance the output uniformity and output power. Finally, an instance simulator based on the structure is developed for performance verification. In the implementation, heat dissipation strategies are introduced to stabilize the system, including the use of heat sinks and flip-connected printed circuit boards to keep heat sources away from the optical chamber, thereby ensuring 0.052% short-term and 1.13% long-term stability. In addition, seven types of LEDs are adopted to simulate the solar spectrum, and its maximum deviation between the AM 1.5G is −8.82%. A control system consisting of a graphical user interface, STM32 microprocessor and constant current sources is developed to configure the current of different color channels. As a result, in predominant area of the entire output slot, six narrow-band and broadband illuminations can achieve 2% non-uniform, which is of interest for testing thin film solar cells.

Spectrum-Tunable Integrating Sphere Light Source Based on Multi-sources

Spectrum measurement for LED-based spectrum-tunable source

Calibrating Light Sources by Using a Planar Mirror.

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Spectrum Illumination for 3— Surface Imaging System

Spectral Design Method to Simulate Tunable Spectra of Various Light Sources Based on Multi-Channel LEDs

Design and Characterization of a Large Aperture Spectral Radiance Source Integrating Sphere for Calibration of Satellite Remote Sensors

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer

Wide Dynamic Range, High Uniformity Spectral Irradiance Source for Calibration of Scientific-Grade, Large-Size Space Detectors

A Deep Learning-Aided Remote Spectrally Tunable LED Light Source Integrated System

Lighting Deviation Correction for Integrating-Sphere Multispectral Imaging Systems.

Study on a Spectrophotometer System for Measuring LED's Photometric Parameters

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Tailoring High-Performance Illumination Lenses for Extended Non-Lambertian Sources.

A Spectral Assembly Algorithm and Mismatch Evaluation Index for Simulating Solar Spectra Using A Variety of LED Monochromatic Optical Chips

Optical design for uniform color mixing illumination system

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

LED-based solar simulator for terrestrial solar spectra and orientations

A compact AAA-compatible multispectral solar simulator based on spherical cap chamber

Portable Multi-Spectral Lens-Less Microscope with Wavelength-Self-calibrating Imaging Sensor

Design of a digital tunable stellar spectrum calibration source based on a digital micromirror device