Abstract:Abstract Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics with low thermal expansion properties are promising for the rapid preparation of large-scale and complex components by directed energy deposition-laser based (DED-LB) technology. However, the wider application of DED-LB technology is limited due to the inadequate understanding of process conditions. The shaping quality, microstructure, and mechanical properties of Al 2 O 3 /Al 6 Ti 2 O 13 (6 mol% TiO 2 ) composite ceramics were systematically investigated as a function of energy input in an extensive process window. On this basis, the formation mechanism of solidification defects and the evolution process of microstructure were revealed, and the optimized process parameters were determined. Results show that high energy input improves the fluidity of the molten pool and promotes the uniform distribution and full growth of constituent phases, thus, facilitating the elimination of solidification defects, such as pores and strip gaps. In addition, the microstructure size is strongly dependent on the energy input, increasing when the energy input increases. Moreover, the morphology of the α -Al 2 O 3 phase gradually transforms from cellular into cellular dendrite with increasing energy input due to changing solidification conditions. Under the comprehensive influence of solidification defects and microstructure size, the fracture toughness and flexural strength of Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics present a parabolic law behavior as the energy input increases. Optimal shaping quality and excellent mechanical properties are achieved at an energy input range of 0.36−0.54 W*min 2 g −1 mm −1 . Within this process window, the average microhardness, fracture toughness, and flexural strength of Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics are up to 1640 Hv, 3.87 MPa m 1/2 , and 227 MPa, respectively. This study provides practical guidance for determining the process parameters of DED-LB of melt growth Al 2 O 3 /Al 6 Ti 2 O 13 composite ceramics.

Interpenetrating Network-Structured Al2O3–Y3Al5O12 Eutectic Composite Grown by Containerlessly Directional Solidification Process

Insights into the Stable Preferred Growth Direction of Rods in the Colony of Al2O3/ZrO2 (Y2O3) Eutectics

Predicting rapid growth behavior in solidified eutectic ceramic composites using infrared thermal imaging and thermal field simulation during laser directed energy deposition

New insights into the growth mechanism of 3D-printed Al2O3–Y3Al5O12 binary eutectic composites

Microstructure of Directionally Solidified Al2O3/EAG Eutectic Ceramics Prepared with High-Temperature Gradient

Preparation and Microstructure of Large-Sized Directionally Solidified Al2O3/Y3Al5O12 Eutectics with the Seeding Technique

Directional solidification and growth characteristics of Al2O3/Er3Al5O12/ZrO2 ternary eutectic ceramic by laser floating zone melting

Directly fabricated Al2O3/GdAlO3 eutectic ceramic with large smooth surface by selective laser melting: Rapid solidification behavior and thermal field simulation

Optimization of growth theory of the directionally solidified alumina based eutectic ceramics

Study on dispersion of Ti2AlC particle and formation of columnar crystal with different solidification rates during CCDS TiAl-based composite

Crystal growth mechanism of directionally solidified Fe–Al–Ta eutectic composites at higher solidification rates

Stability of crystallographic texture and mechanical anisotropy toward Al 2 O 3 /YAG eutectic ceramic composite using single crystalline seeds

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

From irregular to regular eutectic growth in the Al-Al3Ni system: in situ observations during directional solidification

A Feature of the Horizontal Directional Solidification (HDS) Method Affects the Microstructure of Al2O3/YAG Eutectic Ceramics

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Investigation of melt-growth alumina/aluminum titanate composite ceramics prepared by directed energy deposition

Complex Structural Hierarchies Observed in Y2O3–Al2O3–SiO2 Eutectic Ceramics Prepared by Laser Melting

One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition

Insight into faceted-nonfaceted transition of directionally solidified eutectic ceramic composites by laser floating zone melting and infrared imaging

Experimental and Modeling Studies of the Lamellar Eutectic Growth of Mg-Al Alloy