Abstract:International Journal of Aeroacoustics, Ahead of Print. In order to obtain the influence mechanism of the rotor noise and the local aerodynamic variation under different operating conditions, a novel discrete noise analysis strategy for the acoustic source localization is established. The analysis strategy has two aspects including the blade division method and the noise contribution calculation method. Firstly, the body-fitted rotor blade grids are preprocessed and refined at the division position before the flowfield simulation. Then, based on the flowfield result, the blade grids are divided into several blocks in the chordwise and spanwise directions, and the acoustic pressure of each block is predicted. Finally, a discriminant function for the contribution of the block to the rotor noise is proposed, and the acoustic source localization is carried out. The URANS equations and FW-H equations are used to capture high-fidelity flowfield and rotor acoustic pressure. Parameters such as the block position in different direction on the rotor blade and the collective pitches are quantified, and the relationship between air flow and aeroacoustics is discussed in detail. Some conclusions are obtained by analyzing the BO105 model rotor in hover. The acoustic pressure produced by the leading edge of the upper surface could cancel about 50% acoustic pressure of the remainder of these blocks. Increasing the force at this position will be benefit to the noise reduction. Acoustic source distribution is closely linked to the flow separation near the blade tip: the main acoustic source moves toward around 0.9 R section of the blade in the spanwise direction, and it moves from the leading edge towards the trailing edge in the chordwise direction.

Identification and Localization of Airfoil Noise Sources at Low Angles of Attack

Numerical Study on Flow Characteristics and Flow Induced Noise of Flexible NACA0018 Airfoil

Numerical and Experimental Research of Flow Control on an NACA 0012 Airfoil by Local Vibration

Investigation of aeroacoustic localization technique in lining test section

Application investigation of microphone array measuring and testing technique in anechoic wind tunnel

High-resolution localization of rotating acoustic sources: An experimental investigation and axial fan application

Numerical study of acoustic source localization of rotor using a novel discrete noise analysis strategy

Airfoil trailing-edge noise source identification using large-eddy simulation and wavelet transform

Computational statistically optimized near-field acoustical holography (C-SONAH) for virtual noise source identification

Analytical and Numerical Investigations on the Aeroacoustical Oscillation of Flow Past the Cavity

On the noise generated by a controlled-diffusion aerofoil at R e c = 1.5 × 10 5

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Airfoil Tonal Noise Reduction by Roughness Elements. Part II -- Direct Simulations

Research of the Aeroacoustic Noise Simulation Based on Transition/scale-Adapt Model and FW-H Equation

Large-Eddy Simulation and Aeroacoustic Prediction of Supercritical Airfoil Side-Edge Noise

On the Multiple Tones in Trailing Edge Noise of an Aerofoil at Low-to-moderate Reynolds Number Flows

Numerical Simulation of Far Field Acoustics of an Airfoil Using Vortex Method and 2-D FW-H Equation

High Accuracy Numerical Investigation of Trailing Edge Noise at Vortex Shedding Critical Angle of Attack

Prediction of Airfoil Noise Induced by Low-Mach-number Flow

Beamforming And Compressive Sensing Mode Detection Of Duct Acoustic Source By Sensor Array

Experimental Study of Airfoil-Rotor Interaction Noise by Wavelet Beamforming.