Abstract:A birefringent Fourier transform imaging spectrometer with a new lateral shearing interferometer is presented. The interferometer includes a Wollaston prism and a retroreflector. It splits an incident light beam into two shearing parallel parts to obtain interference fringe patterns of an imaging target, which is well established as an aid in reducing problems associated with optical alignment and manufacturing precision. The proposed method provides a direct technology for robust and inexpensive spectrometers to measure spectral signatures. Formulas for the optical path difference (OPD) produced by the proposed birefringent interferometer are derived by the ray-tracing method. Two experiments are carried out to demonstrate the accuracy of the formulas for OPD in the inner scanning mode and window scanning mode, respectively. A laser of wavelength 650 nm is used as a source of the experimental setup. The experimental estimations of the OPD and a reference OPD curve obtained with theoretical analysis are used for comparison. The match between the two curves is highly consistent, for the maximum deviation of the experimental OPD is less than /4. For the further verification of the imaging performance of the proposed method, another experiment is performed. A scene illuminated by an incandescent lamp is used as an imaging target. The temporal rotating of the retroreflector produces a series of time sequential interferograms, where the target is fixed and fringe patterns move. Performing nonuniform fast Fourier transform of the interferogram data produces a spectral data cube (i.e., the spectral images of the target).A series of recovered spectral images whose center wavelengths range from 450 to 650 nm is presented.In this paper, the principle of the instrument is described, and the OPD distribution formula is obtained and analyzed. The performance of the system is demonstrated through a numerical simulation and three experiments. This work will provide an important theoretical basis and the practical instruction for designing a new type of birefringent Fourier transform spectrometer based on Wollaston prism and its engineering applications.

Near-infrared Fourier Transform Imaging Spectrometer for Remote Sensing

Fourier Transform Imaging Spectrometry Using Sagnac Interferometer

Color Router-based Long-wave Infrared Multispectral Imaging

Performance of a long-wave infrared Fourier Transform imaging spectrometer using a corner-cube Michelson interferometer and an uncooled microbolometer array

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Optical Design of Infrared Bispectrum Fourier Transform Imaging Spectrometer

Dual-band Infrared Remote Sensing System with Combined Long-Wave Infrared Imaging and Mid-Wave Infrared Spectral Analysis

Research on snapshot infrared computational spectral imaging technology

Design and validation of infrared interferential imaging spectrometer with high flux

A Snapshot Infrared Imaging Fourier Transform Spectrometer for Dynamic Target Detection

Optical Design of a Hyperspectral Remote-Sensing System Based on an Image-Slicer Integral Field Unit in the Short-Wave Infrared Band

Beam Shearing Characteristic Analysis of Interferometric Hyperspectral Imaging System

High-Snr Static Fourier-Transform Imaging Spectrometer Based on Differential Structure

Optical Design of Imaging Spectrometer Based on Linear Variable Filter for Nighttime Light Remote Sensing

System Design Of Fourier Transform Imaging Spectrometer Using Tunable Lateral Shearing Splitter

A New Imaging FTIR Spectroradiometer

Analysis of System Parameters for Interferometric Imaging Spectrometer

Analytical design and implementation of an imaging spectrometer

A Large Spectral Range Fourier Transform Imaging Spectral System Using Single Beam Splitter

Optical Design Of A Static Lwir Fourier-Transform Imaging Spectrometer With High Throughput

Ultra-compact Fourier Transform Imaging Spectrometer Using a Focal Plane Birefringent Interferometer.