Abstract:This paper presents an elastoplastic damage constitutive modeling method in the thermodynamic framework for geomaterials. The model within this method starts from a strength criterion and shall well describe the full-spectrum stress–strain curves (i.e., curves of Classes I and II). First, a yield function is constructed in the stress space, on the basis of the strength criterion. A heuristic continuous and smooth unified hardening or softening parameter is then introduced into the yield function, which ensures that the yield function has the same form as the strength criterion at the peak stress state. Finally, an appropriate damage criterion is developed to consider the development of microcrack-induced damage. Unlike existing elastoplastic damage models, the yield function in stress space is not related to the damage. In this case, the model established using this modeling method shall derive some analytical solutions under several loading paths, which could be used to calibrate the model parameters and to validate the accuracy of the numerical algorithm. For application, the proposed method is utilized to construct an elastoplastic damage model based on the generalized Hoek–Brown strength criterion. The analytical stress–strain relations of the proposed model are used to predict the mechanical behavior of several types of rock. Comparisons between model predictions and experimental data show that this model can well describe the mechanical behavior of the investigated materials, including strength nonlinearity, strain hardening or softening, volume dilation, and brittle–ductile transition.

On the Constitutive Relations for Damaged Elastoplastic Materials Coupling Anisotropic Damage and Plasticity

On the Closed-Form Constitutive Relations for Damageable Elasto-Viscoplastic Materials

Isotropic Elasto-Plastic Damage Mechanics

Thermoplastic Constitutive Relation Suitable to Dynamic Problems in Anisotropic and Damaged Materials

CONSTITUTIVE THEORY OF PLASTICITY COUPLED WITH ORTHOTROPIC DAMAGE FOR GEOMATERIALS

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A plastic-damage uniaxial compression constitutive of concrete

On Analysis of the Elasto‐viscoplastic Response of Single Crystals with Anisotropic Damage: Constitutive Modelling and Computational Aspects

A Micromechanics Approach to Homogenizing Damageable Elastoplastic Heterogeneous Materials

Thermo-viscoplastic Constitutive Relation of Damaged Materials with Application

Thermo Plastic Constitutive Relation of Damaged Materials and Its Application to Cylinder Fractures

Constitutive Modeling of Damageable Brittle and Quasi-Brittle Materials

A plasticity-damage theory for large deformation of solids—I. Theoretical formulation

Damage Constitutive Equations and its Application to Fiber Reinforced Composites under Transverse Impact

Nonlocal Constitutive Equations of Elasto-Visco-plasticity Coupled with Damage and Temperature

A Heuristic Elastoplastic Damage Constitutive Modeling Method for Geomaterials: From Strength Criterion to Analytical Full-Spectrum Stress–Strain Curves

Damage Constitutive Relationship for Pearlitic Steel with Fine Laminar Microstructure

A Coupled Elastoplastic Anisotropic Damage Model for Rock Materials

A Constitutive Model for Elastoplastic-Damage Coupling Effect of Unidirectional Fiber-Reinforced Polymer Matrix Composites

An Elastoplastic Damage Constitutive Model for Concrete Considering Unilateral Effects

A Coupled Plastic Damage Model for Concrete considering the Effect of Damage on Plastic Flow