Abstract:Detonation initiation is a prerequisite to normal operations of an oblique detonation engine (ODE), and initiation-assistant measures are imperative in cases of initiation failure that occur in a length-limited combustor under wide-range flight conditions. This study numerically investigates the initiation characteristics of oblique detonation waves (ODWs) in H2-fueled ODE combustors at wide-range flight Mach numbers Maf or flight altitudes Hf. Failures of ODW initiation are observed at both low Maf and high Hf if no measure is taken to assist initiation. Through analyses of the flow fields and theoretical predictions of the ignition induction length Lind, the data reveal that the detonation failure at low Maf is raised by the significant decrease in the post-shock temperature due to insufficient shock compression, leading to a significant increase in Lind. The detonation failure at high Hf is caused by the rapid decrease in the combustor inflow pressure as Hf increases, which also results in an increase in Lind. With further identifications of the key flow structures crucial to detonation initiation, an initiation-assistant concept employing a transverse H2 jet is proposed. The simulation results show that through an interaction between the incident oblique shock wave and the jet shock wave, the transverse jet helps to initiate an ODW in the combustor at a low Maf, and the initiation location is relatively fixed and determined by the jet location. At high Hf, a Mach reflection pattern is formed in the combustor under the effects of the transverse jet, and detonative combustion is achieved by the generated Mach stem and its reflected shock waves. The proposed concept of using transverse jets to assist detonation initiation provides a practical reference for future development of ODEs that are expected to operate under wide-range flight conditions.

Analytical and Numerical Investigations of Wedge-Induced Oblique Detonation Waves at Low Inflow Mach Number

Structure of an Oblique Detonation Wave Induced by a Wedge

Numerical Study on Wave Configuration of Wedge-Induced Oblique Detonation Wave: Reactive Boundary Layer Effect

An Investigation of the Oblique Detonation Wave Structure

Oblique detonation waves induced by two symmetrical wedges in hydrogen-air mixtures

Numerical investigation of jet-wedge combinatorial initiation for oblique detonation wave in supersonic premixed mixture

Characteristics of the oblique detonation flow field induced by a complex wave structure

An Investigation of the Prompt Oblique Detonation Wave Induced by a Finite-Length Wedge

Computational Investigation on the formation of liquid-fueled oblique detonation waves

Wedge-induced oblique detonation waves in supersonic kerosene-air premixing flows with oscillating pressure

A Numerical Investigation of the Prompt Oblique Detonation Wave Sustained by a Finite-Length Wedge

Ignition criteria and the effect of boundary layers on wedge-stabilized oblique detonation waves

On the evolutions of induction zone structure in wedge-stabilized oblique detonation with water mist flows

Investigating the flow characteristics and thermodynamic performance of curved detonation waves

Analysis of Morphology of Oblique Detonation Wave in H_2-Air Mixture

Numerical Investigation on Movement of Triple Points on Oblique Detonation Surfaces

Numerical study on stabilization of wedge-induced oblique detonation waves in premixing kerosene-air mixtures

Effects of Wedge-Angle Change on the Evolution of Oblique Detonation Wave Structure

Numerical simulation of oblique detonation waves in H 2-air mixture induced by an infinite wedge

Numerical Investigation of Transverse-Jet-Assisted Initiation of Oblique Detonation Waves in a Combustor

Investigation on Accelerated Initiation of Oblique Detonation Wave Induced by Laser-Heating Hot-Spot