Nanoengineering Carbonaceous Materials: A Multifunctional Platform Towards a Greener Energy Future
Wee‐Jun Ong
DOI: https://doi.org/10.1002/smll.202106667
IF: 13.3
2021-01-01
Small
Abstract:SmallVolume 17, Issue 48 2106667 Guest EditorialFree Access Nanoengineering Carbonaceous Materials: A Multifunctional Platform towards a Greener Energy Future Wee-Jun Ong, Corresponding Author Wee-Jun Ong [email protected] School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900 Malaysia Center of Excellence for NaNo Energy & Catalysis Technology (CONNECT), Xiamen University Malaysia, Selangor Darul Ehsan, 43900 Malaysia College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005 China E-mail: [email protected]Search for more papers by this author Wee-Jun Ong, Corresponding Author Wee-Jun Ong [email protected] School of Energy and Chemical Engineering, Xiamen University Malaysia, Selangor Darul Ehsan, 43900 Malaysia Center of Excellence for NaNo Energy & Catalysis Technology (CONNECT), Xiamen University Malaysia, Selangor Darul Ehsan, 43900 Malaysia College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005 China E-mail: [email protected]Search for more papers by this author First published: 02 December 2021 https://doi.org/10.1002/smll.202106667 Dedicated to the 100th Anniversary of Xiamen University and 5th Anniversary of Xiamen University Malaysia AboutSectionsPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL The search for sustainable, net-zero carbon sources of energy has been a long-standing global agenda for tackling the on-going climate crisis. This has become more pressing with the recently released special report by the United Nations Intergovernmental Panel on Climate Change (IPCC), highlighting that a global rise in temperature of 1.5 °C is likely to occur at the current rate of CO2 emissions.[1] The United Nations also stated that a global coalition must be built to reach carbon neutrality by 2050 before irreversible damage is dealt to our ecosystem.[2] To address this crisis, research on carbonaceous materials as energy storage and conversion materials has been outlined as a solution avenue as they are cost-effective, abundant, environmentally benign materials with a multitude of bonding states and allotropes (Figure 1). Figure 1Open in figure viewerPowerPoint Schematic of nanoengineering design of carbonaceous materials for energy applications. Some examples of such materials are graphene, carbon nanotubes (CNTs), graphitic carbon nitride (g-C3N4), and graphdiyne, which also come in a variety of morphological configurations. However, there still exist many challenges that lie in both the materials processing and application performance. Thus, this special issue themed "Nanoengineering Carbonaceous Materials for Energy" consists of 17 reviews, 6 concept papers and 8 original research papers, which cover the recent progress and challenges in the design, synthesis and applications of carbon-based materials for energy applications. To address the environmental woes, there has been a rise in interest in the development of photocatalytic materials that utilize the abundant solar energy for environmental remediation applications. This is highlighted in a review by Centi et al. (10.1002/smll.202007055), who summarize the recent progress in nanocarbons for the direct synthesis of ammonia from N2 (i.e. N2 reduction reaction). The authors suggest a holistic approach that takes into consideration all functional elements, including the activation of N2, charge transfer to the chemisorbed N2 and reaction intermediates, charge separation and light harvesting, and the reconstruction of active sites during the reaction due to an applied voltage/surface potential. Meanwhile, the hydrogen evolution reaction (HER) through electrochemical water splitting has shown promise as an avenue for renewable energy production. Despite the high electrocatalytic activities of metal-free carbon materials, there still exists a big gap in HER performance between carbon and metal-based electrocatalysts. Hui et al. (10.1002/smll.202006136) aim to bridge this gap by developing graphdiyne, a 2D carbon monolayer comprising sp2 and sp-hybridized carbon atoms, into a 3D carbon fiber network as a model electrocatalyst to assess the HER activity at an atomic level. The 3D porous conductive substrate is found to be beneficial for efficient mass transport and gas release as well as providing a large electrocatalytic surface area. Although renewable energy research such as solar energy has been gaining momentum, one notable problem is that its availability is inconsistent throughout the year and world. Thus, a high-capacity energy storage device should be developed to go in conjunction with the rise in renewable technology. Schutjajew et al. report the influence of pore architecture and chemical structure on nitrogen-doped hard carbons in sodium ion batteries (10.1002/smll.202006767). The introduction of nitrogen is found to positively influence the adsorption of sodium by binding the sodium ions at the edge/defect sites, while the porous structure motifs stabilize sodium within its domain. As a result, the system has a high stability with 90% of the bulk sodiation capacity being maintained after five cycles. Zhang et al. synthesize well-dispersed hollow porous carbon nanofibers (HPCNs) as sulfur hosts for Li-S batteries (10.1002/smll.202004140). The HPCNs are able to encapsulate sulfur within their porous structure, endowing it with excellent cycling performance with an 89% capacity retention after 100 cycles and a 99% Coulombic efficiency. The boosted performance is also attributed to its ameliorated electrocatalytic efficiency, conductivity and ability to endure the volume expansion of sulfur species during the charge/discharge process. Further advances are also discussed with respect to other battery types (Zn-air, Li-CO2) and electrochemical capacitors (10.1002/smll.202006773; 10.1002/smll.202007760; 10.1002/smll.202006821) As explained in the review by Yu et al., the point-defect engineering of carbon-based g-C3N4 is an effective method to circumvent some of the challenges faced in photocatalysis (10.1002/smll.202006851). This strategy holds true for the use of carbon materials for lithium metal anodes, as mentioned by Ma et al. (10.1002/smll.202007142), who demonstrate through first-principles analysis the roles of defect chemistry in carbon materials. In this context, various defect types are investigated based on 2D graphene models and on their Li binding energy and diffusion barrier as an indication of the roles of defects in regulating Li nucleation and growth behaviors. In short, there has been a push towards the implementation of advanced characterization techniques, including ex situ, in situ and operando characterization methods to probe the formation and reaction mechanisms on the surface of nanostructured carbon materials. Additionally, proper benchmarking protocols should be put in place in order to accurately compare and evaluate the performances of these materials between different research groups worldwide as well as with commercial catalysts. Thus, these challenges must be overcome to further advance nanomaterial engineering towards high performance in energy applications. One strategy to accelerate research and development (R&D) in the field of carbon materials is by developing high-throughput synthesis through machine learning optimization of experimental data. Additionally, by integrating advanced intelligence systems which merge automation and robotics, we would be able to converge towards the optimum set-point for nanomaterials development. With the long-standing goal of overcoming the energy crisis, this special issue is a timely and significant perspective for the research community immersed in this field. It is my honor to serve as the Guest Editor of this special issue. I am confident that this issue will captivate the interest of the scientific community to participate in the development of carbonaceous materials for energy applications. I would like to thank the editorial team members of Small (especially Dr. Lisa Smith), who have been a large part of what made this special issue possible. I would also like to express my gratitude towards all the contributing authors for their efforts. On a final note, I would like to offer congratulations for the 100th anniversary of Xiamen University and the 5th anniversary of Xiamen University Malaysia (XMUM) campus as well as for the official launch of the Center of Excellence for NaNo Energy & Catalysis Technology (CONNECT) at XMUM in 2021. Biography Wee-Jun Ong received his B.Eng. and Ph.D. in chemical engineering from Monash University. He is an Associate Professor in School of Energy and Chemical Engineering at Xiamen University Malaysia. Starting from 2021, he becomes a Director of "CONNECT" research center. Previously, he was a scientist at Agency for Science, Technology and Research (A*STAR), Singapore. In 2019, he was a visiting scientist at Technische Universität Dresden and a visiting professor at Lawrence Berkeley National Laboratory. His research interests include nanomaterials for energy storage devices, photocatalytic, photoelectrocatalytic, and electrochemical H2O splitting, CO2 reduction and N2 fixation. For more details, refer to https://sites.google.com/site/wjongresearch/. References 1https://www.ipcc.ch/sr15/ (accessed: October, 2021). 2https://www.un.org/sg/en/content/sg/articles/2020-12-11/carbon-neutrality-2050-the-world's-most-urgent-mission (accessed: October, 2021). Volume17, Issue48Special Issue: Nanoengineering Carbonaceous Materials for EnergyDecember 2, 20212106667 FiguresReferencesRelatedInformation