Abstract:Two models for the constitutive behavior of polycrystalline shape memory alloys (SMAs) are presented. One is a two-phase mixture model, and the other is a microstructure-based two-phase model, accounting for the typical constitutive behavior of Ni-Ti SMAs under different stress states. In both models, it is assumed that in the interested ranges of stress and temperature, the austenite phase is linearly elastic while the martensite phase is elastoplastic.In the first model, an SMA is considered to be composed of austenite and martensite phases, and its constitutive behavior is the combination of the individual behavior of each of the two phases. Making use of the simple Tanaka's phase-transformation rule, the main features of SMAs, such as shape memory effect and pseudoelasticity, can be successfully described. The constitutive behavior of SMA Au-47.5 at.% Cd subjected to uniaxial tension/compression and the pseudoelasticity of a polycrystalline Cu-Al-Zn-Mn SMA subjected to proportional and nonproportional complex stress/strain histories were simulated and compared with experimental results.Experiments showed that the pseudoelastic behavior of NiTi SMAs under pure tension and that under pure torsion were distinctly different, due to the different deformation-induced-transformation microstructures. SEM observation showed parallel texture on the surface of the NiTi SMA microtubes subjected to pure torsion, indicating alternatively arranged parallel fine lamellas of austenite and martensite phases. During pure tension, it was observed that martensite initiated from the parent phase and grew to macroscopic bands, and, correspondingly, a typical stress drop or macroscopic instability was observed in the tensile stress strain curve. FE analyses based on these microstructures replicated the experimental results under pure tension and under pure torsion, respectively, indicating the important role of the microstructure in the macroscopic constitutive response.A microstructure-based two-phase model was developed for the pseudoelastic behavior of NiTi SMAs, which includes three stages: elastoplastic model for the martensite phase and the linearly elastic model for the austenite phase; the model for a representative volume element (RVE) of a cell composed of alternatively arranged parallel austenite and martensite lamellas; and the model for an NiTi SMA by considering the material as an aggregate of numerous cells and making use of the Hill's self-consistent scheme. The model could satisfactorily describe the main characteristics of the pseudoelastic behavior of the NiTi SMA under pure tension and pure torsion. The pseudoelastic behavior of the NiTi SMA under biaxial tension-torsion were also analyzed and compared with experimental results.

A Constitutive Model of Shape Memory Alloys with Consideration of Martensitic Hardening Effect

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

A constitutive model for superelastic shape memory alloys considering the influence of strain rate

Constitutive Model of Shape Memory Alloy Based on Plastic Theory:Experiment and Simulation

A Thermomechanically Coupled Finite Deformation Constitutive Model for Shape Memory Alloys Based on Hencky Strain

Simplified multidimensional constitutive model of super-elasticity shape memory alloy

DYNAMICAL BEHAVIOR AND CONSTITUTIVE MODEL OF SUPERELASTICITY NITI SHAPE MEMORY ALLOY WIRE : EXPERIMENT AND THEORY

Superelastic Behavior of Shape Memory Alloy Wires for Seismic Engineering Application: Theory and Experiment

A Constitutive Description for Shape Memory Alloys with the Growth of Martensite Band.

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

A new constitutive model of superelastic shape memory alloy

A one-dimensional strain-rate-dependent constitutive model for superelastic shape memory alloys

Improved One-Dimensional Constitutive Model of Superelastic Shape Memory Alloy Wires

A Three-Dimensional Constitutive Model For Shape Memory Alloys

Constitutive Models For Shape Memory Alloys: A Two-Phase Mixture Model And A Microstructure-Based Model

A Constitutive Model for Superelasticity of Shape Memory Alloy Based on Neural Network

A Micromechanics-Based Constitutive Model for Nanocrystalline Shape Memory Alloys Incorporating Grain Size Effects

A new model of shape memory alloys

Conventional Plasticity Constitutive Model for Shape Memory Alloys

A 3D finite-strain-based constitutive model for shape memory alloys accounting for thermomechanical coupling and martensite reorientation

A constitutive model of nanoporous NiTi shape memory alloys considering tensile-compressive asymmetry, grain size and porosity