Enhanced Electrochemical Oxidation of Rhodamine B by TiO2-Coated Granular Activated Carbon

Xinyang Li,Chengwen Wang,Liwei Zhang,Yi Qian,Yujue Wang

DOI: https://doi.org/10.1149/ma2012-02/49/3446

2012-01-01

ECS Meeting Abstracts

Abstract:TiO2-coated granular activated carbon Xinyang Li, Chengwen Wang, Liwei Zhang, Yi Qian, Yujue Wang School of Environment, Tsinghua University, Beijing 100084, China lixinyang927@gmail.com

What problem does this paper attempt to address?

Tuning the Morphology and Surface Structure of MnOx@GF Through Ce for High-Efficiency Degradation of Rhodamine B by Electro-Fenton

Xiaocong Liu,Yi Wang,Fuping Zhang,Bo Xing,Guo Yang,Kaibin Zhang,Xingyong Liu,Yan Huang,Min Li,Mingliang Wu

DOI: https://doi.org/10.1016/j.apsusc.2024.161502

IF: 6.7

2025-01-01

Applied Surface Science

Abstract:Widespread and ineffective dye treatment in aquatic environment leads to serious pollution problems, threatening ecology and human health. Herein, manganese cerium bimetallic oxide cathode material (MnCeOx@GF) x @GF) was prepared by hydrothermal method combined with calcination, and the electrochemical Fenton degradation performance of a typical dye Rhodamine B (Rh B) was investigated. The results show that the degradation of Rh B by MnCeOx@GF x @GF can reach 96.5 % within 2 h in acidic environment and continue to perform effectively after 4 repeated experiments. Combined with SEM and electrochemical test results, it can be seen that the bimetallic composite oxides formed by manganese and cerium on the surface of the support can effectively enhance the catalytic activity of the material, the addition of cerium changes the morphology of manganese oxides and promotes the generation of multiple valence composite oxides of transition metals, and improves the degradation of Rh B. Based on the free radical masking experiments, hydroxyl radical (center dot OH) center dot OH) is the main active substance in the electro-Fenton degradation process. This work not only provides a way to design and manufacture cathode materials for in situ electrosynthesis of H2O2, 2 O 2 , but also provides an important reference for improving the reusability of cathodes for sustainable dye wastewater treatment.
Enhanced Electrochemical Oxidation of Synthetic Dyeing Wastewater Using SnO2-Sb-doped TiO2-coated Granular Activated Carbon Electrodes with High Hydroxyl Radical Yields

Xinyang Li,Yue Wu,Wei Zhu,Fangqing Xue,Yi Qian,Chengwen Wang

DOI: https://doi.org/10.1016/j.electacta.2016.09.109

IF: 6.6

2016-01-01

Electrochimica Acta

Abstract:In this study, granular activated carbon (GAC) coated with SnO2-Sb doped TiO2 (GAC/ATOT) with a high hydroxyl radical (OH) yield is prepared via the sol-gel method. This material is utilized as a granular electrode in a continuous-flow three-dimensional electrode reactor (CTDER) for the enhanced treatment of synthetic dyeing wastewater containing Rhodamine B (RhB). We then characterize the physical properties, electrochemical properties, and electrochemical oxidation performance of the granular electrode. The results show that using the GAC/ATOT electrode in a CTDER significantly enhances the chemical oxygen demand (COD) removal, decreases the energy consumption, and improves the current efficiency of the wastewater. This is primarily attributed to the higher catalytic activity of GAC/ATOT for OH production compared to that of other candidates, such as TiO2 coated GAC (GAC/T), Sb doped SnO2 coated GAC (GAC/ATO), and pure GAC. The mechanism of the enhanced electrochemical oxidation afforded by using GAC/ATOT indicates that the high OH yield in the reactor packed with GAC/ATOT electrodes contributes to the enhanced electrochemical oxidation performance with respect to organic compounds. (C) 2016 Elsevier Ltd. All rights reserved.
Synergistic Photosensitized Removal of Cr(VI) and Rhodamine B Dye on Amorphous TiO2 under Visible Light Irradiation.

Qi Wang,Xueshuang Chen,Keer Yu,Yi Zhang,Yanqing Cong

DOI: https://doi.org/10.1016/j.jhazmat.2012.12.017

IF: 13.6

2013-01-01

Journal of Hazardous Materials

Abstract:Amorphous TiO2 (Am-TiO2) was prepared at room temperature by hydrolysis of Ti(OBu)4 in water without addition of strong acids or organic solvents. Results from XRD and TEM revealed that the as-prepared Am-TiO2 was composed of amorphous structure. For the simultaneous photosensitized removal of Cr(VI) and zwitterionic Rhodamine B (RhB) dye, Am-TiO2 exhibited more significant synergistic effect than commercial P25-TiO2. The removal efficiencies for RhB and Cr(VI) after 100min visible light irradiation were 97.8% and 53.5% on Am-TiO2, respectively. While 88.2% RhB and 42.1% Cr(VI) were removed on P25-TiO2. Decreased synergistic activities as well as smaller surface areas were observed when Am-TiO2 was pretreated at high temperatures (200–700°C). Thus, it was the larger specific surface area rather than better crystallinity dominated the synergistic degradation dynamics under visible light irradiation with lower pH (2), greater catalyst loading amount (2g/L), proper RhB/Cr(VI) ratios (1:8) and higher light intensity (500W). Better synergistic performance was also obtained on Am-TiO2 than P25-TiO2 when Cr(VI) coexists with cationic dyes, while negligible difference was observed in the presence of anionic dyes. Superior stability and simplicity of Am-TiO2 was also exhibited in the cyclic runs.
Activation of Carbon Cloth and Concurrent Precipitation of Titania Nanowires for Enhanced Adsorption and Photocatalysis Performance

Jin-Ming Wu,Qing-Er Zhao

DOI: https://doi.org/10.1016/j.apsusc.2020.146779

IF: 6.7

2020-01-01

Applied Surface Science

Abstract:Vertically aligned TiO2 nanowires exhibit excellent photoactivity because of the high specific surface area and increased charge separation; yet the limited adsorption capacity towards target pollutants hinders the photo catalytic degradation of pollutants in water. We report herein a mild solution approach to precipitate anatase TiO2 nanowire arrays, with a tunable thickness of 1.5-4.5 mu m, on carbon cloth to achieve simultaneously high adsorption capacity and excellent photoactivity. When compared with TiO2 nanowire arrays precipitated on metallic Ti substrates, which possess a negligible adsorption capacity, TiO2 nanowires loaded on the activated carbon cloth substrates exhibit a higher efficiency towards photocatalytic degradations of both rhodamine B dye molecules and colorless sulfosalicylic acid in water under UV light illumination. The increasing film thickness is more effective to increase the photoactivity of TiO2 nanowires loaded on the activated carbon cloth than those on metallic Ti foil. The current investigation establishes the feasibility to greatly improve the photoactivity of one-dimensional nanostructured TiO2 arrays by using a highly adsorptive substrate.
Synthesis of magnetic CoFe2O4/ordered mesoporous carbon nanocomposites and application in Fenton-like oxidation of rhodamine B

Jing Deng,Yi-Jing Chen,Yu-An Lu,Xiao-Yan Ma,Shan-Fang Feng,Naiyun Gao,Jun Li

DOI: https://doi.org/10.1007/s11356-017-8941-5

Abstract:CoFe2O4/ordered mesoporous carbon (OMC) nanocomposites were synthesized and tested as heterogeneous peroxymonosulfate (PMS) activator for the removal of rhodamine B. Characterization confirmed that CoFe2O4 nanoparticles were tightly bonded to OMC, and the hybrid catalyst possessed high surface area, pore volume, and superparamagnetism. Oxidation experiments demonstrated that CoFe2O4/OMC nanocomposites displayed favorable catalytic activity in PMS solution and rhodamine B degradation could be well described by pseudo-first-order kinetic model. Sulfate radicals (SO4-·) were verified as the primary reactive species which was responsible for the decomposition of rhodamine B. The optimum loading ratio of CoFe2O4 and OMC was determined to be 5:1. Under optimum operational condition (catalyst dosage 0.05 g/L, PMS concentration 1.5 mM, pH 7.0, and 25 °C), CoFe2O4/OMC-activated peroxymonosulfate system could achieve almost complete decolorization of 100 mg/L rhodamine B within 60 min. The enhanced catalytic activity of CoFe2O4/OMC nanocomposites compared to that of CoFe2O4 nanoparticles could be attributable to the increased adsorption capacity and accelerated redox cycles between Co(III)/Co(II) and Fe(III)/Fe(II).
Electrochemical oxidation of Rhodamine B with cerium and sodium dodecyl benzene sulfonate co-modified Ti/PbO2 electrodes: Preparation, characterization, optimization, application

Zhen Wei,Xuanqi Kang,Shangyuan Xu,Xiaokang Zhou,Bo Jia,Qing Feng

DOI: https://doi.org/10.1016/j.cjche.2020.09.044

IF: 3.8

2021-04-01

Chinese Journal of Chemical Engineering

Abstract:Regulation of the electronic structure and interface property becomes a major strategy in the preparation of electro-catalyst. This paper reports the synthesis of cerium (Ce) and sodium dodecyl benzene sulfonate (SDBS) co-modified Ti/PbO2 electrodes (Ti/PbO2-Ce-SDBS). Ce and SDBS could greatly change the electronic structure and interface property of PbO2. Ti/PbO2-Ce-SDBS exhibited excellent electrocatalytic activity and stability in Rhodamine B (RhB) electrocatalytic oxidation reaction. The improved electrocatalytic activity associates with the synergistic effect of electronic and interface factors. In the electrochemical degradation of RhB, the removal efficiencies of RhB and COD are about 0.880 and 0.694 respectively after the electrolysis of 220 min with Ti/PbO2-Ce-4-SDBS-40, which are higher than the contrast Ti/PbO2 electrodes. In the meantime, the accelerated lifetime of Ti/PbO2-Ce-4-SDBS-40 is more than 6.2 times than that of Ti/PbO2.

engineering, chemical
Improved photocatalytic performance of TiO2/carbon photocatalysts: Role of carbon additive

C Abreu-Jaureguí,L Andronic,A Sepúlveda-Escribano,J Silvestre-Albero

DOI: https://doi.org/10.1016/j.envres.2024.118672

2024-06-15

Abstract:A series of TiO2 - based photocatalysts have been prepared by the incorporation of 10 wt% of various carbon-based nanomaterials as modifying agents to titania. More specifically, commercial TiO2 P25 was modified through a wet impregnation approach with methanol with four different carbon nanostructures: single-walled carbon nanotubes (SWCNTs), partially reduced graphene oxide (prGO), graphite (GI), and graphitic carbon nitride (gCN). Characterization results (XPS and Raman) anticipate the occurrence of important interfacial phenomena, preferentially for samples TiO2/SWCNT and TiO2/prGO, with a binding energy displacement in the Ti 2p contribution of 1.35 eV and 1.54 eV, respectively. These findings could be associated with an improved electron-hole mobility at the carbon/oxide interface. Importantly, these two samples constitute the most promising photocatalysts for Rhodamine B (RhB) photodegradation, with nearly 100% conversion in less than 2 h. These promising results must be associated with intrinsic physicochemical changes at the formed heterojunction structure and the potential dual-role of the composites able to adsorb and degrade RhB simultaneously. Cyclability tests confirm the improved performance of the composites (e.g., TiO2/SWCNT, 100% degradation in 1 h) due to the combined adsorption/degradation ability, although the regeneration after several cycles is not complete due to partial blocking of the inner cavities in the carbon nanotubes by non-reacted RhB. Under these reaction conditions, Rhodamine-B xanthene dye degrades via the de-ethylation route.
A Novel Electro-Catalytic Ozonation Process for Treating Rhodamine B Using Mesoflower-Structured TiO2-coated Porous Titanium Gas Diffuser Anode

Xinyang Li,Guicheng Liu,Mei Shi,Dechun Zou,Chengwen Wang,Jianzhong Zheng

DOI: https://doi.org/10.1016/j.seppur.2016.03.048

IF: 8.6

2016-01-01

Separation and Purification Technology

Abstract:A combined heterogeneous catalytic ozonation (CATAZONE) and electrochemical oxidation (EO) process (E-CATAZONE) for a quick and effective oxidation of refractory organic pollutants (i.e. Rhodamine B) (RhB) was developed. In this process, a porous Ti gas diffuser (PTGD) coated with mesoflower-structured TiO2 was fabricated and simultaneously acted as anodes, ozone (O-3) gas diffusers and catalysts for E-CATAZONE process. Results showed that E-CATAZONE presented a unique synergy between heterogeneous catalytic ozonation and electrochemical oxidation on hydroxyl radical ((OH)-O-center dot) production and RhB mineralization. Owing to the unique 3-D porous structure, novel morphology, as well as its multi catalytic capabilities for both the CATAZONE and EO reactions, mesoflower-structured TiO2 coated porous Ti gas diffusers (MFT-PTGDs) exhibit higher catalytic activity than PTGDs alone for the E-CATAZONE process, thus a high COD (chemical oxygen demand) removal rate of 95.7% was achieved at 2.5 h, showing an apparent pseudo-first-order kinetics with a rate constant of 0.96 h(-1). According to different operation conditions, results also show that the O-3 sparging mode and the electrochemical role of MFT-PTGD significantly affects COD removal. It is found that flow-through mode for O-3 sparging and use of MFT-PTGD as the anode were particularly beneficial for the E-CATAZONE oxidation of Rhodamine B. Thus, the proposed E-CATAZONE presents significantly high oxidation ability than sole CATAZONE and EO processes by using MFT-PTGDs. (C) 2016 Elsevier B.V. All rights reserved.
Co/Fe co-doped porous graphite carbon derived from metal organic framework for microelectrolysis-Fenton catalytic degradation of Rhodamine B

Peng Liu,Dengjie Zhong,Yunlan Xu,Nianbing Zhong,Guangjun He

DOI: https://doi.org/10.1016/j.jece.2021.105924

IF: 7.7

2021-10-01

Journal of Environmental Chemical Engineering

Abstract:Co/Fe co-doped porous graphite carbon (Co/Fe-PGC) nanocomposites were successfully prepared by one-step pyrolysis with CoFe-MOF, in which the Co/Fe nanoparticles were uniformly coated on porous graphite carbon derived from MOF. It was used to microelectrolysis-Fenton degrade rhodamine B through the main active substance ‚ąôOH. The color and TOC removal rate of 100¬†mg/L rhodamine B reached 99.41% and 64.6%, respectively, for 30¬†min. Rhodamine B was degraded into small molecular organic acids, alcohols and lipids by N-demethylation and chromophore cleavage, until it was finally degraded into CO2 and H2O, and no new colored organics were produced in the degradation process. The degradation process follows the first-order reaction kinetics, and its rate constant is much higher than that of the previous similar studies. The excellent catalytic performance of Co/Fe-PGC catalyst is attributed to the coupling effect of micro-electrolysis and Fenton reaction, and the acceleration of cobalt on electron transport and Fe2+ reduction. Co0/Fe0 undergoes galvanic corrosion to generate Co2+/Fe2+ and H2O2, and then these products undergo Fenton reaction to generate Co3+/Fe3+ and ‚ąôOH, thus forming a circulating system of Co3+/Fe3+ and Co2+/Fe2+, enhancing the activation of H2O2 and ensuring the efficient degradation of RhB.

engineering, chemical, environmental
RGO-wrapped Ti3C2/TiO2 nanowires as a highly efficient photocatalyst for simultaneous reduction of Cr(VI) and degradation of RhB under visible light irradiation

Chong Xu,Fan Yang,Bijian Deng,Sai Che,Wang Yang,Ge Zhang,Yankun Sun,Yongfeng Li,Chong Xu,Fan Yang,Bijian Deng,Sai Che,Wang Yang,Ge Zhang,Yankun Sun,Yongfeng Li

DOI: https://doi.org/10.1016/j.jallcom.2021.159865

IF: 6.2

2021-09-01

Journal of Alloys and Compounds

Abstract:A novel photocatalyst of rGO-wrapped Ti3C2/TiO2 nanowires ((Ti3C2/TiO2)@rGO) was successfully synthesized to remove hexavalent chromium (Cr(VI)) and Rhodamine B (RhB) from wastewater. Among the prepared photocatalysts, (Ti3C2/TiO2)@rGO-15 showed the highest photocatalytic activity in both single and mixed pollutant solutions. The excellent photocatalytic activity was ascribed to the enhanced separation efficiency of e- and h+ resulted from the Schottky barrier established in (Ti3C2/TiO2)@rGO. Ti3C2 gathered the stimulated electrons originated from TiO2 and further transferred them to rGO, thus enhancing the separation efficiency of e- and h+. Furthermore, different scavengers were employed to determine the reactive species involved in the photocatalytic reaction system. This work may provide a promising way to promote the separation efficiency of e- and h+ via appropriate incorporation of co-catalyst.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Iron-modified granular sludge biochar-based catalysts for improved Rhodamine B degradation by activating peroxymonosulfate

Bingxing Zhu,Yang Yu,Yindi Ding,Shifu Ge

DOI: https://doi.org/10.1007/s13399-022-03340-0

IF: 4.05

2022-10-07

Biomass Conversion and Biorefinery

Abstract:Anaerobic granular sludge (AnGS) is a potential resource for biochar production due to its unique microstructure and high organic contents. In this study, Fe 3 O 4 -loaded biochar derived from AnGS as a catalyst for peroxymonosulfate (PMS) activation was synthesized through iron modification and pyrolysis at different temperatures. The biochar characterization indicated that surface area (249.145 m 2 g −1 ) and microporosity (131.819 m 2 g −1 ) were significantly enhanced at 800 °C. Furthermore, the excellent magnetic properties of the iron-modified biochar at 800 °C (S@Fe-800) (45.28 emu g −1 ) were confirmed, in which Fe 3 O 4 was identified as the dominant reactive species. S@Fe-800 exhibited remarkable PMS activation ability for organic pollutants, which displayed superior Rhodamine B (RhB) removal efficiency. Results from the quenching experiments and electron paramagnetic resonance (EPR) detections demonstrated that the reactive oxidizing species (ROS), including sulfate radical (SO 4 •− ), were generated in the S@Fe-800/PMS system. Meanwhile, the significant intermediates and possible degradation path of PMS decomposition over RhB were proposed. It is believed that this work provides an effective method for organic contaminants removal and a green utilization route for AnGS.

energy & fuels,engineering, chemical
Pd Nanoparticles Supported on Carbon-Modified Rutile TiO2 As a Highly Efficient Catalyst for Formic Acid Electrooxidation

Xiao-Ming Wang,Jie Wang,Qing-Qing Zou,Yong-Yao Xia

DOI: https://doi.org/10.1016/j.electacta.2010.08.003

IF: 6.6

2011-01-01

Electrochimica Acta

Abstract:In this article, Pd nanoparticles supported on carbon-modified rutile TiO2 (CMRT) as a highly efficient catalyst for formic acid electrooxidation were investigated. Pd/CMRT catalyst was synthesized by using liquid phase reduction method in which Pd nanoparticles was loaded on the surface of CMRT obtained through a chemical vapor deposition (CVD) process. Pd/CMRT shows three times the catalytic activity of Pd/C, as well as better catalytic stability towards formic acid electrooxidation. The enhanced catalytic property of Pd/CMRT mainly arises from the improved electronic conductivity of carbon-modified rutile TiO2, the dilated lattice constant of Pd nanoparticles, an increasing of surface steps and kinks in the microstructure of Pd nanoparticles and slightly better tolerance to the adsorption of poisonous intermediates.
Preparation of protonized titanate nanotubes/Fe3O4/TiO2 ternary composites and dye self-sensitization for visible-light-driven photodegradation of Rhodamine B

Panpan Chen,Yiyu Cai,Jie Wang,Kangwei Wang,Yinsong Tao,Jiadan Xue,Huigang Wang

DOI: https://doi.org/10.1016/j.powtec.2017.12.010

IF: 5.64

2018-02-01

Powder Technology

Abstract:Protonized titanate nanotubes/Fe3O4/TiO2 ternary composites (denoted as TNT/Fe3O4/TiO2) have been successfully prepared through a hydrothermal method with the tetrabutyltitanate as the precursor. The component of Titanate nanotubes act as the absorbents and endows the photocatalyst high flexibility to wide-range pollutants concentration, and the component of Fe3O4 endows the photocatalysts magnetic properties with easy recovery ability. The visible and UV–Visible light driven photodegradation of Rhodamine B (RhB) over TNT/Fe3O4/TiO2 was systematically investigated. The exposed active {101} facets can be sensitized by RhB and dramatically enhanced the visible light photocatalytic activity of the TiO2. Synergistic effect of the high specific surface area, magnetic reclaim and the strong interaction between the dye and TiO2 make the catalysis exhibit extraordinary photocatalytic performance and promising application. The detailed e− and h+ separation dynamics for visible-light induced catalytic mechanism was discussed.

engineering, chemical
Enhanced activity of bismuth-compounded TiO2 nanoparticles for photocatalytically degrading rhodamine B solution

Jia Wang,Liqiang Jing,Lianpeng Xue,Yichun Qu,Honggang Fu

DOI: https://doi.org/10.1016/j.jhazmat.2008.02.103

IF: 13.6

2008-12-01

Journal of Hazardous Materials

Abstract:TiO(2) nanoparticles compounded with different amounts of bismuth were prepared by a sol-gel method, and the effects of compounding bismuth on the phase transformation, photoinduced charge separation and photocatalytic activity for degrading rhodamine B solution were mainly investigated, along with enhancement mechanism of photocatalytic activity of TiO(2) nanoparticles by compounding bismuth species. It can be confirmed that, by means of X-ray diffraction (XRD), surface photovoltage spectroscopy (SPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), compounding bismuth can extend the optical response, and effectively inhibit the phase transformation process from anatase to rutile, consequently greatly improving the anatase crystallinity so as to promote the photoinduced charge separation. These factors are responsible for the increase in the photocatalytic activity of TiO(2) compounded with an appropriate amount of bismuth species.

environmental sciences,engineering, environmental
Carbon modified Ti(I/S) composite and its photocatalytic degradation of Rhodamine B

Jing Yang,Jie Wang,Chuanfang Xie,Yang Zhou,Liang Wei,Xiande Yang

DOI: https://doi.org/10.1039/d3nj01302b

IF: 3.3

2023-06-08

New Journal of Chemistry

Abstract:Rhodamine B (RhB) is a carcinogenic cationic dye with strong stability and fluidity in water. For this purpose, carbon (C) modified TiO2 pillared Illite/Smectite (Ti(I/S)) composite (C-Ti(I/S)) was successfully synthesized to degrade RhB under visible light irradiation. Due to the existence of carbon nanomaterials, C-Ti(I/S) composite had larger specific surface area and stronger electron holes separation ability than that of Ti(I/S) composite. The results showed that C-Ti(I/S) composite had good photocatalytic activity for RhB degradation. After 120 min, about 80% of RhB was degraded by C-Ti(I/S)-3, which was much higher than that of C (40%) or Ti(I/S) (60%). In addition, the C-Ti(I/S)-3 composite also had good photocatalytic stability. In this photocatalytic system of C-Ti(I/S)-3 composite, the oxidation of RhB was mainly composed of h+ and ·O2-.

chemistry, multidisciplinary
Peroxydisulfate‐based Non‐radical Oxidation of Rhodamine B by Fe‐Mn Doped Granular Activated Carbon: Kinetics and Mechanism Study

Jiahua Wu,Xuan Yang,Xu Dong,Say Leong Ong,Jiangyong Hu

DOI: https://doi.org/10.1002/asia.202400482

2024-06-19

Chemistry - An Asian Journal

Abstract:The present study focused on a green and readily synthesized Fe‐Mn bimetallic oxide doped GAC (Fe‐Mn@GAC), to uncover its catalytic kinetics and mechanism when used in the peroxydisulfate (PDS)‐based oxidation process for degrading Rhodamine B (RhB), a representative xenobiotic dye. The synthesized Fe‐Mn@GAC was characterized by SEM‐EDS, XRD, ICP‐OES and XPS analyses to confirm its physicochemical properties. The catalytic kinetics of Fe‐Mn@GAC + PDS system were evaluated under varying conditions, including PDS and catalyst dosages, solution pH, and the presence of anions. It was found Fe‐Mn@GAC exhibited robust catalytic performance, being insensitive to a wide pH range from 3 to 11, and the presence of anions such as Cl‐, SO42‐, NO3‐ and CO32‐. The catalytic mechanism was investigated by EPR and quenching experiments. The results indicated the catalytic system processed a non‐radical oxidation pathway, dominated by direct electron transfer between RhB and Fe‐Mn@GAC, with singlet oxygen (1O2) playing a secondary role. The catalytic system also managed to maintain a RhB removal above 81% in successive 10 cycles, and recover to 89.5% after simple DI water rinse, showing great reusability. The catalytic system was further challenged by real dye‐containing wastewater, achieving a decolorization rate of 84.5%.

chemistry, multidisciplinary
Combined Electro-Catazone/electro-peroxone Process for Rapid and Effective Rhodamine B Degradation

Xinyang Li,Shaobin Sun,Xu Zhang,Guicheng Liu,Clark Renjun Zheng,Jianzhong Zheng,Dayi Zhang,Hong Yao

DOI: https://doi.org/10.1016/j.seppur.2016.12.052

IF: 8.6

2017-01-01

Separation and Purification Technology

Abstract:An integral electro-catazone and electro-peroxone (E-cataperoxone) process was developed for quick and effective oxidation of Rhodamine B (RhB) as the model refractory organic pollutant in this study. A mesoflower-structured TiO2-coated porous Titanium gas diffuser (MFT-PTGD) acted as both the anode and the O-3 gas diffuser, while carbon polytetrafluoroethylene was used as the cathode. During O-3/O-2 mixture flowing through the MFT-PTGD, O-3 was electrochemically catalyzed simultaneously by the TiO2 mesoflower at the anode (via an electro-catazone reaction) and the in situ generated H2O2 at the cathode (via an electro-peroxone reaction) to achieve a high yield of (OH)-O-center dot. The E-cataperoxone process shows an integral effect and significantly enhances the RhB degradation rate and efficacy. Additionally, owing to the unique three-dimensional porous structure and flow-through configuration of the MFT-PTGD anode, the O-3 flow-through mode is superior to O-3 flow-by mode for the E-cataperoxone oxidation of RhB. These results suggest that the E-cataperoxone process is an effective and promising means of degrading refractory organic pollutants in wastewater. (C) 2017 Elsevier B.V. All rights reserved.
C, F co-doping Ag/TiO2 with visible light photocatalytic performance toward degrading Rhodamine B

Zhengyang Chen,Shui Yu,Jianping Liu,Yamei Zhang,Yuchen Wang,Jiangyi Yu,Ming Yuan,Pengchao Zhang,Wen Liu,Jiaoxia Zhang

DOI: https://doi.org/10.1016/j.envres.2023.116311

IF: 8.3

2023-09-01

Environmental Research

Abstract:The organic pollutants in industrial wastewater continuously endanger human health. Therefore, effective treatment of organic pollutants is very urgent. Photocatalytic degradation technology is an excellent solution to remove it. TiO2 photocatalysts are easy to prepare and have high catalytic activity, unfortunately, TiO2 only absorbs ultraviolet light limiting its utilization of visible light. In this study, a facile environmentally friendly synthesis of Ag-coated on micro-wrinkled TiO2-based catalysts in order to extend the absorption of Visible light. Firstly, a fluorinated titanium dioxide precursor was prepared by a one-step solvothermal method, and the precursor was calcined at high temperature in a nitrogen atmosphere to form a carbon dopant, and then a surface silver-deposited carbon/fluorine co-doped TiO2 photocatalyst C/F-Ag-TiO2 was prepared by a hydrothermal method The results showed that the Ag was coated on the wrinkled TiO2 layer and C/F-Ag-TiO2 photocatalyst was synthetized successfully. Benefit from the synergistic effect of doped carbon and fluorine atoms in combination with the quantum size effect of the surface silver nanoparticles, the band gap energy of C/F-Ag-TiO2 (2.56 eV) is obviously lower than anatase (3.2eV). The photocatalyst achieved an impressive degradation rate of 84.2% for Rhodamine B in 4 h, with a degradation rate constant of 0.367 h-1, which was 17 times higher than that of P25 under visible light. Therefore, the C/F-Ag-TiO2 composite is a promising candidate as a highly efficient photocatalyst for environmental remediation.

environmental sciences,public, environmental & occupational health
Fe-doped biochar derived from waste sludge for degradation of rhodamine B via enhancing activation of peroxymonosulfate

Tianchan Zang,Hao Wang,Yinghao Liu,Li Dai,Shuang Zhou,Shiyun Ai

DOI: https://doi.org/10.1016/j.chemosphere.2020.127616

IF: 8.8

2020-12-01

Chemosphere

Abstract:The disposal and management of waste sludge is a considerable challenge for environmental protection and resource utilization. Herein, sludge-based biochar material loaded with nano-Fe3O4 () was fabricated via hydrothermal carbonization process and employed as catalyst to activate peroxymonosulfate (PMS) for degrading organic dyes in wastewater. Benefiting from the proper iron content, porous structure and the good dispersibility of iron on the catalyst surface, the proposed catalyst not only exhibited excellent catalytic activity and durability in the activation of PMS to degrade Rhodamine B (RhB), which was almost completely removed in 10 min (50 mL 50 mg L−1), but also performed broad application prospects in pollutant degradation. More importantly, the free radical quenching test and electron spin-resonance spectroscopy (ESR) detection demonstrated that O2•-, SO4•-, OH and 1O2 were generated during the process of catalyst activation of PMS. Based on this, a possible reaction pathway for degrading RhB with the aid of was put forward. It is believed that this work offers a promising reuse method of converting the waste sludge to a high efficiency and low-cost nano magnetic catalyst to activate PMS for degrading refractory organic pollutants in aquatic surroundings.

environmental sciences
Iron carbide nanoparticles encapsulated in guanine-derived carbon for peroxymonosulfate activation

Shuchun Li,Yiling Ke,Xuefei Zhang,Shuchang Wu,Zailai Xie

DOI: https://doi.org/10.1016/j.seppur.2024.126570

IF: 8.6

2024-02-02

Separation and Purification Technology

Abstract:Iron and nitrogen co-doped carbon-based catalysts have garnered significant attention for their efficacy in the degradation of Rhodamine B (RhB), Tetracycline (TC) and other organic pollutants through peroxymonosulfate (PMS) activation. However, designing catalysts with both high activity and abundant active sites has proven challenging, primarily due to the limited understanding of the structure-activity relationship. Herein, we present a straightforward synthesis of iron and nitrogen co-doped carbon nanosheets (FeNC) that exhibit exceptional activity in activating PMS for degradation of RhB and TC. The FeNC material shows robust resistance to interference across a wide pH of 1.5 to 10, resistance to inorganic anions and humic acid (HA). More importantly, the Fe 3 C nanoparticles are uniformly anchored within the carbon layer, effectively prevent metal leaching. Unlike the traditional sulfate radical-based advanced oxidation processes, our study reveals that non-radical singlet oxygen ( 1 O 2 ) serves as the main reactive oxygen species (ROS) responsible for the degradation processes through quenching tests and electron paramagnetic resonance (EPR) analysis. Structural characterizations and spectroscopic study indicate that the potential active sites on FeNC, namely CO, graphitic and pyridinic nitrogen play an important role in this degradation. Particularly noteworthy is the discovery that Fe 3 C species, present in the FeNC-900/PMS system, also contribute significantly to the degradation of TC. Moreover, we have proposed potential degradation pathways for RhB and TC based on the results of liquid chromatograph mass spectrometer (LC-MS) measurement. Overall, this study offers novel insights into the development of heterogeneous iron and nitrogen co-doped carbon-based catalysts for advanced oxidation processes (AOPs) via PMS activation.

engineering, chemical

Enhanced Electrochemical Oxidation of Rhodamine B by TiO2-Coated Granular Activated Carbon

Tuning the Morphology and Surface Structure of MnOx@GF Through Ce for High-Efficiency Degradation of Rhodamine B by Electro-Fenton

Enhanced Electrochemical Oxidation of Synthetic Dyeing Wastewater Using SnO2-Sb-doped TiO2-coated Granular Activated Carbon Electrodes with High Hydroxyl Radical Yields

Synergistic Photosensitized Removal of Cr(VI) and Rhodamine B Dye on Amorphous TiO2 under Visible Light Irradiation.

Activation of Carbon Cloth and Concurrent Precipitation of Titania Nanowires for Enhanced Adsorption and Photocatalysis Performance

Synthesis of magnetic CoFe2O4/ordered mesoporous carbon nanocomposites and application in Fenton-like oxidation of rhodamine B

Electrochemical oxidation of Rhodamine B with cerium and sodium dodecyl benzene sulfonate co-modified Ti/PbO2 electrodes: Preparation, characterization, optimization, application

Improved photocatalytic performance of TiO2/carbon photocatalysts: Role of carbon additive

A Novel Electro-Catalytic Ozonation Process for Treating Rhodamine B Using Mesoflower-Structured TiO2-coated Porous Titanium Gas Diffuser Anode

Co/Fe co-doped porous graphite carbon derived from metal organic framework for microelectrolysis-Fenton catalytic degradation of Rhodamine B

RGO-wrapped Ti3C2/TiO2 nanowires as a highly efficient photocatalyst for simultaneous reduction of Cr(VI) and degradation of RhB under visible light irradiation

Iron-modified granular sludge biochar-based catalysts for improved Rhodamine B degradation by activating peroxymonosulfate

Pd Nanoparticles Supported on Carbon-Modified Rutile TiO2 As a Highly Efficient Catalyst for Formic Acid Electrooxidation

Preparation of protonized titanate nanotubes/Fe3O4/TiO2 ternary composites and dye self-sensitization for visible-light-driven photodegradation of Rhodamine B

Enhanced activity of bismuth-compounded TiO2 nanoparticles for photocatalytically degrading rhodamine B solution

Carbon modified Ti(I/S) composite and its photocatalytic degradation of Rhodamine B

Peroxydisulfate‐based Non‐radical Oxidation of Rhodamine B by Fe‐Mn Doped Granular Activated Carbon: Kinetics and Mechanism Study

Combined Electro-Catazone/electro-peroxone Process for Rapid and Effective Rhodamine B Degradation

C, F co-doping Ag/TiO2 with visible light photocatalytic performance toward degrading Rhodamine B

Fe-doped biochar derived from waste sludge for degradation of rhodamine B via enhancing activation of peroxymonosulfate

Iron carbide nanoparticles encapsulated in guanine-derived carbon for peroxymonosulfate activation