Abstract:A numerical model based on the discrete element method was developed to simulate the wet particle flow in a rotating drum. The model explicitly considered the capillary force between particles and liquid distribution within the packed bed. Physical experiments under similar conditions were carried out to validate the model, showing that the simulation and experiment results were quite comparable in terms of the flow patterns, maximum flow repose angle, and the frequency of avalanching. Flow properties in two different states were investigated with the focus on the effect of liquid surface tension. In the quasistatic state with the drum rotating at very low speeds, discrete avalanches were observed after the flow reached the maximum repose angle. However, flow properties had changed well before avalanches occurred. The microscopic analysis indicated that the strength caused by the capillary force reached a minimal when avalanches started. The maximum repose angle increased with increasing capillary force and their relationship was compared with the theoretical models based on the Mohr-Coulomb criterion and force balance. In the dynamic state, the bed showed continuous surface flow at weak surface tensions but transited into discrete avalanches characterized by the plough flow as the surface tension further increased. The flow became more dilated at high surface tensions with increased particle contacts and more uniform stress distribution. The energy and frequency of collisions between particles also decreased as the liquid surface tension increased and more collisions were observed in the region 4-5 particle diameters below the flow surface. The results would be useful to the development of a comprehensive understanding of the mechanisms of particle mixing and segregation. (c) 2011 American Institute of Physics. [doi:10.1063/1.3543916]

Particle Scale Investigation of Flow and Mixing of Wet Particles in Rotating Drums

Numerical Study of Wet Particle Flow in A Rotating Drum

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Multi-level Coarse-Grained Discrete Element Method Modeling of Cylinder Particle Flow in a Rotating Drum

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Modelling of the Flow of Ellipsoidal Particles in a Horizontal Rotating Drum Based on DEM Simulation

Three-dimensional axial dispersion dynamics of granular flow in the rolling-regime rotating drum

DEM study of the transverse mixing of wet particles in rotating drums

Investigating the Flow of Rod-Like Particles in a Horizontal Rotating Drum Using DEM Simulation

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Dynamics of wet particles in rotating drums: Effect of liquid surface tension

Modelling the Granular Flow in a Rotating Drum by the Eulerian Finite Element Method

DEM simulation and analysis of particle mixing and heat conduction in a rotating drum

Granular surface flow in a two-dimensional rotating drum: Particle dynamics simulation

Numerical Simulation of Particle Dynamics in Different Flow Regimes in A Rotating Drum

Microdynamic analysis of particle flow in a horizontal rotating drum

Self-diffusion of wet particles in rotating drums

Partially Saturated Granular Flow in a Rotating Drum: The Role of Cohesion

Flow Regimes of Cohesionless Ellipsoidal Particles in a Rotating Drum

110th Anniversary: Continuum Modeling of Granular Mixing in a Rotating Drum

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study