Abstract:Unified 1D numerical modeling of high-pressure high-current arc discharges is revisited. Two regimes of current transfer to anodes are investigated. The “passive anode” regime occurs for low and moderate anode surface temperatures [Formula: see text]. The energy flux from the plasma to the anode surface, [Formula: see text], depends on [Formula: see text] rather weakly in this regime and may be conveniently expressed in terms of the local current density [Formula: see text], and the so-called anode heating voltage [Formula: see text] [Formula: see text] is independent of the arc length and the cathode surface temperature, although it weakly varies with [Formula: see text] between approximately [Formula: see text] in the range from [Formula: see text]. In the “active anode” regime, [Formula: see text] is higher than in the passive anode regime and varies with [Formula: see text]. The active anode regime may occur on hot refractory anodes, such as those of high-intensity discharge lamps, when [Formula: see text] exceeds approximately [Formula: see text] and the thermionic electron emission from the anode comes into play. The latter causes an increase in the electron density near the anode. One consequence is the increase in the electron energy transport from the bulk plasma to the near-anode layer by electron heat conduction. The other effect contributing to increase in [Formula: see text] is the formation of a negative near-anode space-charge sheath with a positive voltage drop. In non-stationary simulations, the active regime occurs via the development of a thermal instability similar to that causing the appearance of spots on thermionic arc cathodes. The occurrence of the active regime is strongly affected by parameters, in particular, by the distance between the anode surface and the cooling fluid.

Numerical simulation of anode activity under action of high-current vacuum arc

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Development of Numerical Analysis Method for Cathode Sheath Considering Electron Emission From Cathode in Vacuum Arc

Investigation of a short argon arc with hot anode. Part I: numerical simulations of non-equilibrium effects in the near-electrode regions

Numerical investigation of regimes of current transfer to anodes of high-pressure arc discharges

Non-equilibrium Modelling of Free-Burning Argon Arc in Different Anode Sheath Regimes

Numerical investigations of AC arcs' thermal characteristics in the short gap of copper-cored wires

Numerical Simulation and Experimental Investigation of the Influence of Gap Distance on Vacuum Arc Characteristics Between TMF Contacts

Study of Arc Interruption Characteristics under Rated Current in Low Voltage Circuit Breakers

Two-dimensional self-consistent numerical simulation of the whole discharge region in an atmospheric argon arc

Simulation of Arc Characteristics in Miniature Circuit Breaker

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

Finite volume simulation of arc: pinching arc plasma by high-frequency alternating longitudinal magnetic field

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

Simulating vacuum arc initiation by coupling emission, heating and plasma processes

Numerical Simulation of Static Electric Field in Double Glow Discharge and Edge Effect in Vacuum

Numerical Simulation of the Voltage–Current Characteristic of an Atmospheric Pressure Discharge: The Glow-to-Arc Transition

Investigation of the Short Argon Arc with Hot Anode, Part II: Analytical Model

Application of arc breaking simulation in development of extra high voltage SF<sub>6</sub> circuit breaker

Simulation on multi-species vacuum arc considering both ionization-recombination and species diffusion processes