Abstract:Magnetic bearings (MBs) enable the rotor to run at high speed without lubrication due to no mechanical contact. However, the inherent hysteresis of ferromagnetic materials affects the support characteristics, reducing the design performance and stability margin of MBs, especially for axial MBs using materials with high coercive force. To analyze and compensate for the hysteresis effect on the electromagnetic force in axial MBs, an efficient method is proposed in this paper. Firstly, the hysteresis properties of the ferromagnetic materials are simulated by the Preisach model, and the B-H relationships under any external magnetic field can be determined. Taking into account the non-ideal factors such as hysteresis and saturation effects, the nonlinear magnetic circuit model of the axial MBs is established. The magnetic flux density working point under different control currents and eccentric displacements can be determined through iterative calculation, and then the air gap flux density distribution and electromagnetic force of the axial MBs are calculated. On this basis, the adverse effects of hysteresis on the bearing capacity and system stability of axial MBs are analyzed. A compensation algorithm is designed based on the inverse model to reduce the hysteresis effect. The inverse model is approximated modeled by the Lissajous curve. Finally, the proposed analysis and control methods are verified by the finite element method (FEM) or experiments. The results show that the proposed analysis method is capable of accomplishing good accuracy and requires less computation time than FEM, it can be applied to arbitrary current variation processes. In addition, the phase lag of the system is effectively improved with the compensation algorithm.

Research about Eddy Effect and Dynamic Force of the Magnetic Thrust Bearing

Eddy Current Loss Analysis of Sliding Bearing for Active Excitation Magnetic Fluid Lubrication

New Analytical Solution for the Analysis and Design of Permanent Magnet Thrust Bearings

Analytical Modeling of Air Gap Magnetic Fields and Bearing Force of a Novel Hybrid Magnetic Thrust Bearing

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Effect of permanent magnet's structure on static behavior of a superconducting thrust bearing

Magnetic Field Analysis Using an Analytical Method in a Radial Magnetic Bearing

Analysis of Temperature Field Distribution of Magnetic-Fluid Bearing for High-Speed Trains

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

ANSYS Simulation and Performance Analysis Under Eccentricity for Magnetic Fluid Bearings

Optimum Design of Permanent Magnet Thrust Bearings Based on Current Sheet Model

Analysis of eddy current field for new type of thrust bearings based on single-objective genetic algorithm

Investigation of Cross-Coupling Effect of a 3-DOF Magnetic Bearing Using Magnetic Circuit Method

Study on type of magnetic suspension rotor groove and wear of drop touchdown bearing

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

Active Control of Bearing Force Transmissibility for Active Magnetic Bearings-rigid Rotor Systems

Dynamic Stiffness Analysis and Experimental Verification of Axial Magnetic Bearing Based on Air Gap Flux Variation in Magnetically Suspended Molecular Pump

A Controllable Flexible Backup Bearing for Active Magnetic Bearings

Analysis on Electromangentic Bearing Characteristics Based on ANSYS

The Fem Calculation Of Iron Loss In The Active Magnetic Bearing

Study on Inverter-fed Three-pole Active Magnetic Bearing