Abstract:Driven by intriguingly high energy density up to 2600 Wh/kg, lithium sulfur (Li–S) battery is considered as one of the most promising energy storage devices compared with conventional lithium ion battery. The main obstructions plaguing Li–S batteries associated with the electrical resistivity of sulfur/lithium sulfides, the dissolution of polysulfides in ether-based electrolyte and the large volume variation, result in poor cycling performance and rate capability. Here, we develop a polymer optimized cathode that is polydopamine layer coated on the surface of sulfur loaded hierarchical porous graphitic carbon composites (HPGC-S-PD) by a simple in-situ polymerization method toward the highly suppressed shuttle effect, thus the significantly improved cell performance. Attributed to the superiorities of the structure engineering including the strengthened polysulfide trapping, accelerated ionic conductivity and stable electrode construction, this cathode can deliver an excellent cycling performance over 700 cycles at 1 C, a high areal capacity of 7.25 mAh/cm2 with raised sulfur loading as high as 5.15 mg/cm2. Meanwhile, the obtained cathode can work well with a lower E/S ratio compared with the non-coated cell, which suggests the immense possibility for yielding a practically Li–S battery with high energy density based on this electrode architecture. Strikingly, the pouch cell with optimized cathode material can realize an energy density of 272 Wh/kg after 40 cycles at 0.1 C. This rational design of sulfur cathode combining HPGC with polymer coating by a scalable strategy provides a comprehensive understanding of the structural engineering for sulfur cathodes in pursuit of practically high performance Li–S batteries.

Improving the performance of PEDOT-PSS coated sulfur@activated porous graphene composite cathodes for lithium–sulfur batteries

Palladium nanocrystals-imbedded mesoporous hollow carbon spheres with enhanced electrochemical kinetics for high performance lithium sulfur batteries

PEDOT-PSS coated sulfur/carbon composite on porous carbon papers for high sulfur loading lithium–sulfur batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Facile and Scalable Synthesis of Micro-Mesoporous Carbon/magnesium Oxide/sulfur Composite for Lithium-Sulfur Batteries

Three-dimensional porous carbon composites containing high sulfur nanoparticle content for high-performance lithium–sulfur batteries

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

Sulfur-infiltrated Graphene-Based Layered Porous Carbon Cathodes for High-Performance Lithium-Sulfur Batteries.

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Reduced porous carbon/N-doped graphene nanocomposites for accelerated conversion and effective immobilization of lithium polysulfides in lithium-sulfur batteries

Interface polymerization synthesis of conductive polymer/graphite oxide@sulfur composites for high-rate lithium-sulfur batteries

Polarity-induced precipitation of S/Li2S confined into N and S co-doped porous graphene layered matrix for lithium sulfur batteries

Porous 3D graphene-based biochar materials with high areal sulfur loading for lithium–sulfur batteries

Dual-stage polyporate framework with redox mediator for high loading lithium sulfur batteries

Ultraﬁne Nanosulfur Particles Sandwiched in Little Oxygen-functionalized Graphene Layers as Cathodes for High Rate and Long-life Lithium-Sulfur Batteries.

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries

Polypyrrole-modified carbon nanotubes@manganese dioxide@sulfur composite for lithium–sulfur batteries

A Mixed Microporous/Low-range Mesoporous Composite with High Sulfur Loading from Hierarchically-structured Carbon for Lithium Sulfur Batteries

3D Dual-Confined Sulfur Encapsulated in Porous Carbon Nanosheets and Wrapped with Graphene Aerogels As A Cathode for Advanced Lithium Sulfur Batteries

Graphene Oxide-Polypyrrole Composite As Sulfur Hosts for High-Performance Lithium-Sulfur Batteries

A pomegranate-structured sulfur cathode material with triple confinement of lithium polysulfides for high-performance lithium–sulfur batteries