Abstract:In this article, an updated dynamic model of mobile manipulators is presented, which incorporates the effects of wheel slipping and skidding in the mobile base motion equations. This modified model is then used to design an improved control algorithm. The interaction between the robot's mobile platform and manipulator often leads to inaccuracies when using traditional control methods. To address this, a modified control strategy is proposed. Unlike previous research, which faced difficulties directly measuring wheel slippage and traction forces, this work implements a disturbance observer to estimate these unknown parameters. The control algorithm is then designed using the feedback from the observer estimates. First, kinematic control is used to guide the robot along the desired trajectory. Next, dynamic control augmented with the disturbance observer enables robust tracking. Specifically, a disturbance observer-based sliding mode controller is developed for dynamic control of the system. This is further optimized using the state-dependent Riccati equation method. Lyapunov analysis proves system stability and guarantees disturbance estimation errors converge to zero. Simulations on a model of a mobile manipulator confirm the effectiveness of the proposed method. When combining the disturbance observer and sliding mode control, the consumed torque of the wheels and arms is reduced on average by 0.42 Nm and 0.04 Nm, respectively. Defining a cost function and optimizing the torques with the optimal sliding mode control approach further decreases the required torque to 5.17 Nm compared to the basic SMC, while also reducing tracking error by 4.9 mm. Despite platform slippage, the controller performance keeps end effector errors small and within allowable bounds. Experimental validation on a Scout robot demonstrates the feasibility of implementing this method on physical systems. The robot is able to track desired trajectories with acceptable errors. The tracking error in experiments is approximately 54 mm, compared to 13 mm in simulation.

An Amendatory Dynamic Model With Slip For Four-Wheeled Omni-Directional Mobile Robot

Motion control of four wheeled omni-directional robot

Motion Analysis and Control Realization of Omni-Directional Robot

Modeling and Optimal Control of Omni-Directional Mobile Robots

Design, Modeling And Trajectory Generation Of A Kind Of Four Wheeled Omni-Directional Vehicle

Performance-Oriented Coordinated Adaptive Robust Control For Four-Wheel Independently Driven Skid Steer Mobile Robot

Design and Motion Control of Spherical Robot With Built-In Four-Wheel Omnidirectional Mobile Platform

Model-Based Coordinated Control of Four-Wheel Independently Driven Skid Steer Mobile Robot with Wheel/Ground Interaction and Wheel Dynamics

ODD: Omni Differential Drive for Simultaneous Reconfiguration and Omnidirectional Mobility of Wheeled Robots

Dynamic Modelling Using Screw Theory And Nonlinear Sliding Mode Control Of Serial Robot

Research on Some Control Algorithms to Compensate for the Negative Effects of Model Uncertainty Parameters, External Interference, and Wheeled Slip for Mobile Robot

Adaptive model predictive control for an omnidirectional mobile robot with friction compensation and incremental input constraints

Adaptive robust control with slipping parameters estimation based on intelligent learning for wheeled mobile robot

Dynamic Model Based Robust Tracking Control of a Differentially Steered Wheeled Mobile Robot

Online Learning Based Mobile Robot Controller Adaptation for Slip Reduction

Synthetic Optimization of Trafficability and Roll Stability for Off-Road Vehicles Based on Wheel-Hub Drive Motors and Semi-Active Suspension

An Omnidirectional Mobile Operating Robot Based On Mecanum Wheel

Modeling and Control of a Two-wheel Mobile Robot with Auxiliary Arms

Wheel Slippage Compensation in Mobile Manipulators Through Combined Kinematic, Dynamic, and Sliding Mode Control

An RBFNN-Informed Adaptive Sliding Mode Control for Wheeled Mobile Robots

An Anti-sideslip Path Tracking Control Method of Wheeled Mobile Robots