Abstract:We demonstrate a long-distance multi-frequency microwave distribution system over an optical fiber link with high phase stability based on transferring an optical frequency comb (OFC). The phase fluctuation induced by the transmission link variations is detected by applying a reference OFC and is then compensated with the proposed optical voltage-controlled oscillator (OVCO) by adjusting the phase of the repetition rate of the transmitted OFC. By applying the OVCO, we perform the OFC-based multi-frequency microwave distribution over a 100 km standard single-mode fiber. The performance of the transmission system can be exhibited by evaluating the repetition rate (10.015 GHz) and second harmonic frequency (20.03 GHz) signals achieved at the remote end. The residual phase noise of the 10.015 GHz and 20.03 GHz signal is -64 dBc/Hz and -58 dBc/Hz at 1 Hz frequency offset from the carrier, respectively. The fractional frequency instability is 1.4x10(-16) and 2.4x10(-16) at 10000 s averaging time, respectively. And the timing jitter in the frequency range from 0.01 Hz to 1 MHz reaches 88 fs and 87 fs, respectively. Based on the phase-locked loop theory, we conduct a simulation model of the transmission system and the simulated results match well with experiments. It shows that by detecting the phase fluctuation with higher harmonic frequency signals in the simulation system, the performance of the transmission system can be further improved. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Stabilized Microwave Frequency Dissemination Based on Wavelength-shifted Optical Feedback

Stable Photonic Transmitting Link Based on Passive Phase Compensation with Active-Assisted Control Method

Microwave Frequency Dissemination Via 50 Km Optical Fiber Based on Optical Delay Compensation

Long-term stable frequency transfer over an urban fiber link using microwave phase stabilization.

The Frequency Transfer over 1000 Km of Fiber Using the Optical Frequency Comb

Photonic radio-frequency dissemination via optical fiber with high-phase stability.

High-resolution Microwave Frequency Dissemination Via 56 Km Optical Fiber Based on Microwave Phase Compensation

Distribution of Optical-Comb-based Multi-Frequency Microwave Signals over 100 Km Optical Fiber with High Phase Stability.

High Stability Microwave Frequency Distribution with Optical Fiber

Stable Frequency Dissemination over Multi-Access Fiber Loop Link with Optical Comb.

Distribution of a phase-stabilized 100.02 GHz millimeter-wave signal over a 160 km optical fiber with 4.1 × 10-17 instability.

Long-term stability of frequency transfer over an urban fiber link using microwave phase compensation

Distribution of high-stability 100.04 GHz millimeter wave signal over 60 km optical fiber with fast phase-error-correcting capability

Frequency Dissemination over 1000 Km Optical Fiber with 10−21 Frequency Instability

Noncooperative Wideband Microwave Signal Stabilization System

Frequency comb-based microwave transfer over fiber with $7 \times 10^{-19}$ instability using fiber-loop optical-microwave phase detectors

RF Transfer by Optical Comb Over 50-km Fiber Link With $4.7\times 10^{-18}$ Instability

Ultrastable Frequency Dissemination Based on Feed-forward Digital Phase Compensation Technology

Highly Stable Dissemination of Microwave and Millimeter Wave Signals over Fiber-Optic Links

Frequency Comb-Based Multiple-Access Ultrastable Frequency Dissemination with 7 × 10(-17) Instability.

Microwave frequency transfer over a 112-km urban fiber link based on electronic phase compensation