Abstract:The performance of Cu-based catalysts in the low temperature CO2 conversion to methanol highly correlates with interfacial structure. In this paper, the interfacial structure of Cu/ZrO2 catalysts is tuned by changing the molar ratio and precipitation sequence of Cu and Zr precursors in the oxalate precipitation method. Structural characterizations demonstrate that the interface structure gradually transforms from the conventional ZrO2-supported nano-Cu interface to the Cu-supported nano-ZrO2 inverse interface with the ascending Cu/Zr ratio. The space–time yield (STY) of methanol over 90 molCu% Cu/ZrO2 inverse catalyst is 518 gCH3OH/kgcat/h, which far exceeds that of the optimized 40 molCu% Cu/ZrO2 catalyst (351 gCH3OH/kgcat/h). The inverse catalyst also exhibits the best methanol selectivity and lowest apparent activation energy. The correlation of the exposed Cu surface area, Cu particle size, and CO2 adsorption capacity with STYmethanol reveal that there is an optimal coverage of fine ZrO2 particles and the Cu supported nano-ZrO2 inverse configuration is a more suitable structure for methanol synthesis from CO2. High-pressure in situ DRIFTS experiment shows that the adsorbed formate and methoxy intermediates over 90 molCu% Cu/ZrO2 inverse catalyst are more reactive for further hydrogenation. In addition, the inverse configuration is more favorable for the methanol desorption from surface. The enhanced hydrogenation ability and relatively weak oxygenates adsorption of Cu-supported nano-ZrO2 interface is probably the main reasons for the improved catalytic performances of inverse catalysts.

Effects of Alkaline-Earth Oxides on the Performance of a CuO–ZrO2catalyst for Methanol Synthesis Via CO2hydrogenation

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Modulation of Al2O3 and ZrO2 composite in Cu/ZnO-based catalysts with enhanced performance for CO2 hydrogenation to methanol

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Enhanced selectivity to methanol in CO2 hydrogenation on CuO/ZrO2 catalysts by alkali metal modification

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Effect of the ZrO 2 –Al 2 O 3 solid solution on the performance of Ni/ZrO 2 –Al 2 O 3 catalysts for CO 2 methanation

An Insight into Synergistic Metal-Oxide Interaction in CO2 Hydrogenation to Methanol over Cu/ZnO/ZrO2

Effect of Oxide Coating on Performance of Copper-Zinc Oxide-Based Catalyst for Methanol Synthesis via Hydrogenation of Carbon Dioxide

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Effects of alkaline-earth metals on CoMn-based catalysts for the Fischer–Tropsch synthesis to olefins

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

XPS Studies of Cu/ZnO/Al2O3 Ultra-Fine Catalysts Derived by a Novel Gel Oxalate Co-Precipitation for Methanol Synthesis by CO2+H2

Effect of ZrO2 on CuO/gamma-Al2O3 catalyst in carbon monoxide oxidation

High-performance Al-doped Cu/ZnO catalysts for CO 2 hydrogenation to methanol: MIL-53(Al) source-enabled oxygen vacancy engineering and related promoting mechanisms

Insights into the interfacial structure of Cu/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: Effects of Cu-supported nano-ZrO2 inverse interface

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Influences of preparation methods of ZrO2 support and treatment conditions of Cu/ZrO2 catalysts on synthesis of methanol via CO hydrogenation

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2