Long-period Fibre Grating Based Biosensor for Detection of DNA Hybridisation

Xianfeng Chen,Marcus Hughes,Kaiming Zhou,Edward Davies,Lin Zhang,Anna Hine,Ian Bennion

DOI: https://doi.org/10.1364/bgpp.2007.btue4

2007-01-01

Abstract:We implement an optical biosensor using long-period fibre grating immobilised with probe DNA. It has been used to detect hybridisation of target DNA, showing a high sensitivity and reusability function.

What problem does this paper attempt to address?

DNA Hybridisation Biosensor Based on Dual-Peak Long-Period Grating

Xianfeng Chen,Kaiming Zhou,Marcus Hughes,Edward Davies,Lin Zhang,Anna Hine,Kate Sugden,Ian Bennion

DOI: https://doi.org/10.1109/aoe.2007.4410712

2008-01-01

Abstract:Using an optical biosensor based on dual-peak long-period fibre grating, we demonstrate the detection of interactions between DNA biomolecules in real-time, showing a high sensitivity and reusability function.
Real-time Detection of DNA Interactions with Long-Period Fiber-Grating-based Biosensor.

Xianfeng Chen,Lin Zhang,Kaiming Zhou,Edward Davies,Kate Sugden,Ian Bennion,Marcus Hughes,Anna Hine

DOI: https://doi.org/10.1364/ol.32.002541

IF: 3.6

2007-01-01

Optics Letters

Abstract:Using an optical biosensor based on a dual-peak long-period fiber grating, we have demonstrated the detection of interactions between biomolecules in real time. Silanization of the grating surface was successfully realized for the covalent immobilization of probe DNA, which was subsequently hybridized with the complementary target DNA sequence. It is interesting to note that the DNA biosensor was reusable after being stripped off the hybridized target DNA from the grating surface, demonstrating a function of multiple usability.
Optical fibre-based detection of DNA hybridization.

Anna V Hine,Xianfeng Chen,Marcus D Hughes,Kaiming Zhou,Edward Davies,Kate Sugden,Ian Bennion,Lin Zhang

DOI: https://doi.org/10.1042/BST0370445

2009-01-01

Biochemical Society Transactions

Abstract:A dual-peak LPFG (long-period fibre grating), inscribed in an optical fibre, has been employed to sense DNA hybridization in real time, over a 1 h period. One strand of the DNA was immobilized on the fibre, while the other was free in solution. After hybridization, the fibre was stripped and repeated detection of hybridization was achieved, so demonstrating reusability of the device. Neither strand of DNA was fluorescently or otherwise labelled. The present paper will provide an overview of our early-stage experimental data and methodology, examine the potential of fibre gratings for use as biosensors to monitor both nucleic acid and other biomolecular interactions and then give a summary of the theory and fabrication of fibre gratings from a biological standpoint. Finally, the potential of improving signal strength and possible future directions of fibre grating biosensors will be addressed.
Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Shuntao Li,Huiyuan Zhang,Huimin Zhang,Junhao Li,Yongdong Du,Mingxuan Bi,Qiu-Shun Li,Yunqian Cui,Lei Cai,Mingyu Li,Wen-Fei Dong

DOI: https://doi.org/10.1109/jlt.2024.3510933

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:The dual resonant peaks of a long-period fiber grating (LPFG) have been prepared by depositing the polyelectrolyte multilayer films composed of salt-containing poly(diallyldimethyl- ammonium chloride) (PDDA) and salt-containing poly(sodium-p- styrenesulfonate) (PSS). The multilayered polyelectrolyte films of PDDA/PSS were alternately assembled on the surface of the LPFG via electrostatic layer-by-layer (LBL) self-assembly approach. The sensing performance of the dual resonant peaks of the LPFG to nanofilms has been further evaluated. The experimental results demonstrated that the optimal sensitivities of the left resonant peak and the right resonant peak in the dual resonant peaks were as high as 52.79 nm/bilayer and 56.09 nm/bilayer, respectively, which were approximately 128 times and 136 times that of another single resonant peak in sequence. Finally, the reason for the emergence of the dual resonant peaks and the corresponding response mechanism to nanofilms were further analyzed and discussed theoretically. These findings are very beneficial for exploring the application of LPFGs in many fields such as biochemical sensing, drug screening, food detection and so on.
Fibre-optic Interferometric Immuno-Sensor Using Long Period Grating

DW Kim,Y Zhang,KL Cooper,A Wang

DOI: https://doi.org/10.1049/el:20060040

2006-01-01

Electronics Letters

Abstract:A species-specific biosensor is presented based on the combined use of a reflection mode long period fibre grating with nanoscale self-assembly. Self-assembled polyelectrolyte layers and the immobilisation of immunoglobulin G (IgG) were used for sensor fabrication. The sensor's fringe position shift induced by specific antigen-antibody binding has been observed, and non-specific binding was minimised with binding block. The results show the feasibility of the sensor for various bio/chemical applications.
Optical Biochemical Sensors Based on Long-Period Fibre Gratings Uv-Inscribed in D-Fibre with Enhanced Sensitivity by Hf Etching

XF Chen,KM Zhou,L Zhang,I Bennion

DOI: https://doi.org/10.1117/12.572033

2003-01-01

Abstract:We report a new concept of biochemical sensor device based on long-period grating structures UV-inscribed in D-fibre. The surrounding-medium refractive index sensitivity of the devices has been enhanced significantly by a hydrofluoric acid etching process. The devices have been used to measure the sugar concentrations showing clearly an encoding relation between the chemical concentration and the grating spectral response, demonstrating their capability for potential biochemical sensing applications.
In-situdetection of DNA Hybridization with a Microfiber Bragg Grating Biosensor

Dandan Sun,Tuan Guo,Xiaodong Xie,Yang Ran,Yunyun Huang,Bai-Ou Guan

DOI: https://doi.org/10.1117/12.2059433

2014-01-01

Abstract:Microfiber Bragg gratings (mFBGs) can be used as cost-effective and relatively simple-to-implement biosensors for monitoring DNA interactions in situ. The sensors are functionalized by a monolayer of poly-L-lysine (PLL) with the specific molecular recognition probe DNA sequences to bind with high specificity to a given target. By recording the wavelength seperation between the two resonant peaks of a single mFBG, the mFBG biosensor is capable of detecting the presence of specific target DNA in situ.
Label-Free Detection of Dna Hybridization Using A Reflective Microfiber Bragg Grating Biosensor with Self-Assembly Technique

Dandan Sun,Tuan Guo,Bai-Ou Guan

DOI: https://doi.org/10.1109/jlt.2017.2659778

IF: 4.7

2017-01-01

Journal of Lightwave Technology

Abstract:A label-free fiber-optic biosensor with a reflective microfiber Bragg grating (mFBG) configuration for in-situ DNA hybridization detection has been proposed and experimentally demonstrated. A single straight Bragg grating inscribed in the silica microfiber provides two well-defined resonances in reflection, which show different response to external medium refractive index (RI) and present the same temperature sensitivity. By monitoring the wavelength separation between these two resonances, temperature-compensated RI measurement has been achieved. The label-free bio-recognition scheme used demonstrates that the sensor relies on the surface functionalization of a monolayer of poly-l-lysine (PLL), synthetic DNA sequences that bind with high specificity to a given target. In addition to monitoring the surface functionalization of the fiber in real-time, the results also show how the fiber biosensor can detect the presence of the DNA hybridization with high specificity, in various concentration of target DNA solutions, with lowest detectable concentration of 0.5 µM.
Hybrid Optical Fibre Grating for Label-Free Biodetection

Jiaxing Sun,Luis Poveda-Wong,Hanlin Jiang,Jaime Cascante-Vindas,Jose L. Cruz,Miguel Andres,Xianfeng Chen

DOI: https://doi.org/10.1117/12.3016659

2024-01-01

Abstract:We propose a unique hybrid grating yielding ultra-narrow and high signal-to-noise ratio reflection resonances. The hybrid grating has been demonstrated a high refractive index (RI) sensitivity of 741 pm/RIU for the lower RI region (1.333-1.360) which is comparable to that of biomolecule analyte. It has been exploited as label-free optical biosensor for the detection of human haemoglobin achieving a sensitivity of 1.5 pm/(mg/mL) and a detectable concentration of 0.67 mg/mL. The proposed biosensor can be further developed as a point-of-care medical device for portable and label-free biomedical diagnostic applications.
Grating-coupled surface-plasmon fluorescence DNA sensor

Amal Kasry,Andreas Nicol,Wolfgang Knoll

DOI: https://doi.org/10.1007/s00340-021-07619-4

2021-04-23

Applied Physics B

Abstract:Genetic analysis is considered to be the ultimate diagnostic approach in many fields, e.g., in medicine for disease detection, in agricultural technology for food and feed authentication, in forensics, to name a few. Consequently, great interest is growing in developing sensitive and reliable analytical tools (biosensors) to identify whole DNA sequences, oligonucleotide fragments, or single-nucleotide polymorphisms (SNPs). In addition, these biosensors are becoming vital tools for clinical diagnosis and point-of-care systems. They need to be of high sensitivity, high specificity, fast response, inexpensive, and easy to use. In this work, we discuss a surface-plasmon fluorescence grating coupler-based biosensor, fabricated on polymer substrates, and with a designed surface binding procedure that offers the direct response required for a sensor to be implemented in a disposable system. These gratings fabricated on polymer substrates using an embossing technique showed excellent and reproducible resonance coupling results. We also present a monitoring protocol for hybridization reactions based on fluorescence resonance energy transfer (FRET) to quench the bulk solution contribution that decreases the sensitivity of the grating biosensors.
High-performance polarization control modulated surface plasmon resonance sensor based on monolayer graphene/Au-NPs architecture for detection of DNA hybridization

Yi Sun,Haoyuan Cai,Xin Qiao,Xiaoping Wang

DOI: https://doi.org/10.1088/1361-6501/ab383a

IF: 2.398

2019-09-17

Measurement Science and Technology

Abstract:A highly sensitive polarization control modulated plasmonic biosensor based on monolayer graphene/Au-NPs for direct detection of single-stranded DNA (ssDNA) hybridization is reported. The presence of monolayer graphene on gold film provides novel functionalized derivatives through π-stacking interactions. In addition, the online assembly strategy via in situ monitoring between ssDNA and Au-NPs makes the binding easier and quantifiable. The use of strong plasmon-mediated energy confinements induces an approximately 30-fold intense field enhancement of the reflected light. The architecture exhibits a linear dynamic range of 10−15 to 10−7 M for the detection of target ssDNA. Moreover, the new biosensor can achieve an ultralow detection limit of 500 aM for 23-mer ssDNA via improved sensitivity to molecular bindings.

engineering, multidisciplinary,instruments & instrumentation
Label-free Oligonucleotide Biosensor Based on Dual-Peak Long Period Fiber Grating

Xianfeng Chen,Chen Liu,Marcos R. Cardoso,Cleber R. Mendonca,David A. Nagel,Anna V. Hine,Lin Zhang

DOI: https://doi.org/10.1117/12.2207869

2016-01-01

Abstract:We report the simplification and development of biofunctionalization methodology based on one-step 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)-mediated reaction. The dual-peak long period grating (dLPG) has been demonstrated its inherent ultrahigh sensitivity to refractive index (RI), achieving 50-fold improvement in RI sensitivity over a standard LPG sensor used in low RI range. With the simple and efficient immobilization of unmodified oligonucleotides on sensor surface, dLPG-based biosensor has been used to monitor the hybridization of complementary oligonucleotides showing a detectable oligonucleotide concentration of 4 nM with the advantages of label-free, real-time, and ultrahigh sensitivity.
Square-microfiber-integrated Biosensor for Label-Free DNA Hybridization Detection

Jixuan Wu,Xu Zhang,Bo Liu,Hao Zhang,Binbin Song

DOI: https://doi.org/10.1016/j.snb.2017.07.168

IF: 9.221

2017-01-01

Sensors and Actuators B Chemical

Abstract:A compact square-microfiber-integrated biosensor is proposed and experimentally demonstrated for label-free detection of DNA hybridization process. The proposed biosensor is constructed by splicing a square microfiber fabricated using a square fiber based on flame scanning technique with two segments of standard single-mode fibers. The square microfiber with strong evanescent field is immobilized with bio-recognition genetic DNA to capture target genetic DNA. The transmission spectral characteristics of the proposed biosensor is analyzed and the dynamic spectral response is investigated as well by monitoring the DNA hybridization process in real time. Owing to its cost-effective, real-time detection, and high integration, the proposed biosensor provides a promising approach for label-free genetic sequencing and an efficient platform for biological specificity recognition. (C) 2017 Published by Elsevier B.V.
Design and Simulation of Biosensor Based on Long Period Fiber Grating

张志荣,张冠茂,张晓萍

DOI: https://doi.org/10.3969/j.issn.1004-1699.2008.06.003

2008-01-01

Abstract:A novel design of biosensor is presented which is based on long period fiber grating and can be used in detection or analysis of biological substance,where by using high efficient and special catalytic characteristic of the bioactive substances,the cladding index and radium of the gratings are directly modulated.Computer is used to simulate the relation of resonance wavelength with the refractive index and thickness of the compound thin film.A beneficial try and the theoretical basis for the development of the novel high sensitive biosensors are provided.
In-situ DNA Hybridization Detection Based on a Reflective Microfiber Probe

Yanpeng Li,Fang,Liuyang Yang,ShiJie Tan,Zhijun Yan,Qizhen Sun

DOI: https://doi.org/10.1364/oe.380896

IF: 3.8

2019-01-01

Optics Express

Abstract:A label-free biosensor based on a reflective microfiber probe for in-situ real-time DNA hybridization detection is proposed and experimentally demonstrated. The microfiber probe is simply fabricated by snapping a non-adiabatic biconical microfiber through closing the oxyhydrogen flame during fiber stretching. Assisted with the Fresnel reflection at the end of microfiber, a reflective microfiber modal interferometer is realized. The in-situ DNA hybridization relies on the surface functionalization of a monolayer of Poly-L-lysine (PLL) and synthetic DNA sequences that bind to a given target with high specificity. The detection processes of DNA hybridization in various concentration of target DNA solutions are monitored in real-time and the experimental results present a minimum detectable concentration of 10pM with good repeatability. Additionally, the detection specificity is also investigated by immersing the microfiber probe into the non-complementary ssDNA solutions and observing the spectral variation. The proposed biosensor has advantages of high sensitivity, compact size, ease of use and simple fabrication, which makes it has great potential to be applied in a lot of fields such as disease diagnosis, medicine, and environmental science.
Optical fiber SPR biosensor based on gold nanoparticle amplification for DNA hybridization detection

Like Li,Ya-Nan Zhang,Wanlu Zheng,Xuegang Li,Yong Zhao,Ya-nan Zhang

DOI: https://doi.org/10.1016/j.talanta.2022.123599

IF: 6.1

2022-05-29

Talanta

Abstract:An optical fiber SPR biosensor based on multimode fiber (MMF)- hollow core fiber (HCF)-MMF is proposed and experimentally confirmed for in situ DNA hybridization analysis. In order to improve the sensitivity of DNA hybridization detection, a sandwich model based on gold nanoparticles (AuNPs) amplification is proposed. In this model, the probe DNA (pDNA) is first modified on the optical fiber sensing area by covalent bonding, and then the biotinylated target DNA (tDNA) is modified on the AuNPs by the high affinity between biotin and streptavidin. Finally, the tDNA on the surface of the AuNPs specifically hybridizes with the pDNA on the optical fiber to form a sandwich model. The near field coupling enhancement between AuNPs and gold film and the high mass ratio of AuNPs give high sensitivity to DNA hybridization detection. Experimental results show that the sandwich-type fiber SPR sensor has a log-linear response in the DNA concentration range of 1 pM–10 nM, and the sensitivity and detection limit are 4.04 nm/log(μM) and 1pM, respectively. This is 1.44 times more sensitive than that without sandwich assay. In addition, the DNA sensor has good specificity and stability, which foreshadows its great application potential in the fields of disease diagnosis, microbial detection and environmental science.

chemistry, analytical
A Novel Biosensor for the Detection of Glucose Concentration Using the Dual-Peak Long Period Grating in the Near- to Mid-Infrared

Namita Sahoo,Bing Sun,Yidong Tan,Kaiming Zhou,Lin Zhang

DOI: https://doi.org/10.3390/s24041247

IF: 3.9

2024-02-16

Sensors

Abstract:In this article, we demonstrate an improved efficient fibre sensor with a high sensitivity to measure glucose concentrations in the physiological range of human beings, operating in a broad spectral bandwidth from the near- to mid-infrared. The sensor consists of a dual-peak long period grating (DPLPG) with a period of 150 μm inscribed in an optical fibre with a diameter of 80 μm. The investigation of sensing for refractive index results in a sensitivity of ~−885.7 nm/refractive index unit (RIU) and ~2008.6 nm/RIU in the range of 1.30–1.44. The glucose measurement is achieved by the immobilisation of a layer of enzyme of glucose oxidase (GOD) onto the fibre surface for the selective enhancement of sensitivity for glucose. The sensor can measure glucose concentrations with a maximum sensitivity of −36.25 nm/(mg/mL) in the range of 0.1–3.0 mg/mL. To the best of our knowledge, this is the highest sensitivity ever achieved for a measurement of glucose with a long period grating-based sensor, indicating its potential for many applications including pharmaceutical, biomedical and food industries.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design and Fabrication of Gr/Ag-coated Tilted Grating Sensor for Ultra-Sensitive Detection of DNA Hybridization

Wen Yang,Mingshun Jiang,Shouzhen Jiang,Lutao Du,Yangyang Cheng,Peilong Li,Chuanxin Wang

DOI: https://doi.org/10.1016/j.snb.2022.131587

2022-01-01

Abstract:A graphene sensitized biosensor based on 6 tilted fiber Bragg grating (TFBG) was proposed. The introduction of the graphene coating boosted the sensitivity and stability of the Ag/TFBG sensor, and improved the probe loading and molecular capture of the sensitized layer. A quantitative analytical model was proposed to calculate the hybridization efficiency and maximum sensor response of DNA single base mismatch. The results showed that the kinetic affinity response of the Gr/Ag/TFBG sensor was stably demonstrated with a dissociation constant (k(d) =9.392 +/- 0.178.10(-3) min(-1)) and the detection limit of DNA was as low as 3 pM. This indicates that the sensor has the ability to distinguish single base mutations quantitatively in real time. The surface modification, probe binding and DNA hybridization were characterized based on atomic force microscopy (AFM) and Raman detection spectrum detection system. A 3D diversity analysis model for TFBG sensors was innovatively proposed based on COMSOL. The multi-mode coupling and polarization response analysis of the inner core, the electric field distribution and polarization transmission mode of the sensitized layer, and the polarization gain brought by graphene are systematically described. Excellent bioanalytical capabilities combined with well-established analytical methods make prepared sensor promising for high-throughput screening of genetic variants and disease markers.
Thin-core Fiber-Optic Biosensor for DNA Hybridization Detection

Shao-Cong Long,Yan-Ru Zhu,Mu-Yun Hu,Yi-Fan Qi,Yun-Rui Jiang,Bo Liu,Xu Zhang

DOI: https://doi.org/10.1007/s11801-018-8054-5

2018-01-01

Abstract:A real-time label-free DNA biosensor based on thin-core fiber (TCF) interferometer is demonstrated experimentally. The proposed biosensor is constructed by splicing a TCF between two segments of single mode fibers (SMFs) and integrated into a microfluidic channel. By modifying the TCF surface with monolayer poly-l-lysine (PLL) and single-stranded deoxyribonucleic acid (ssDNA) probes, the target DNA molecules can be captured in the microfluidic channel. The transmission spectra of the biosensor are measured and theoretically analyzed under different biosensing reaction processes. The results show that the wavelength has a blue-shift with the process of the DNA hybridization. Due to the advantages of low cost, simple operation as well as good detection effect on DNA molecules hybridization, the proposed biosensor has great application prospects in the fields of gene sequencing, medical diagnosis, cancer detection and environmental engineering.
Rapid and quantitative detection of DNA hybridization using a simplified Fabry–Perot interferometric biosensor

Xin Shi,Yanhong Ma,Yipeng Liao,Hoi Lut Ho

DOI: https://doi.org/10.1039/d4ra01390e

IF: 4.036

2024-04-25

RSC Advances

Abstract:This study introduces a miniaturized fiber-optic Fabry–Perot (FP) interferometric biosensor, distinctively engineered for cost-effective, rapid, and quantitative DNA sequence detection. By leveraging the interference patterns generated within a Fabry–Perot microcavity, our sensor precisely monitors DNA hybridization events in real-time. We have verified the sensor's biofunctionalization via fluorescent labeling and have extensively validated its performance through numerous hybridization and regeneration cycles with 1 μM single-stranded DNA (ssDNA) solutions. Demonstrating remarkable repeatability and reusability, the sensor effectively discerns ssDNA sequences exhibiting varying degrees of mismatches. Its ability to accurately distinguish between sequences with 2 and 7 mismatches underscores its potential as a valuable asset for swift DNA analysis. Characterized by its rapid response time—typically yielding results within 6 minutes—and its adeptness at mismatch identification, our biosensor stands as a potent tool for facilitating accelerated DNA diagnostics and research.

chemistry, multidisciplinary

Long-period Fibre Grating Based Biosensor for Detection of DNA Hybridisation

DNA Hybridisation Biosensor Based on Dual-Peak Long-Period Grating

Real-time Detection of DNA Interactions with Long-Period Fiber-Grating-based Biosensor.

Optical fibre-based detection of DNA hybridization.

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Fibre-optic Interferometric Immuno-Sensor Using Long Period Grating

Optical Biochemical Sensors Based on Long-Period Fibre Gratings Uv-Inscribed in D-Fibre with Enhanced Sensitivity by Hf Etching

In-situdetection of DNA Hybridization with a Microfiber Bragg Grating Biosensor

Label-Free Detection of Dna Hybridization Using A Reflective Microfiber Bragg Grating Biosensor with Self-Assembly Technique

Hybrid Optical Fibre Grating for Label-Free Biodetection

Grating-coupled surface-plasmon fluorescence DNA sensor

High-performance polarization control modulated surface plasmon resonance sensor based on monolayer graphene/Au-NPs architecture for detection of DNA hybridization

Label-free Oligonucleotide Biosensor Based on Dual-Peak Long Period Fiber Grating

Square-microfiber-integrated Biosensor for Label-Free DNA Hybridization Detection

Design and Simulation of Biosensor Based on Long Period Fiber Grating

In-situ DNA Hybridization Detection Based on a Reflective Microfiber Probe

Optical fiber SPR biosensor based on gold nanoparticle amplification for DNA hybridization detection

A Novel Biosensor for the Detection of Glucose Concentration Using the Dual-Peak Long Period Grating in the Near- to Mid-Infrared

Design and Fabrication of Gr/Ag-coated Tilted Grating Sensor for Ultra-Sensitive Detection of DNA Hybridization

Thin-core Fiber-Optic Biosensor for DNA Hybridization Detection

Rapid and quantitative detection of DNA hybridization using a simplified Fabry–Perot interferometric biosensor