Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Experimental Study on Mechanical Characteristics of Jatropha Seeds

Partitioning Genetic Effects Due to Embryo, Cytoplasm and Maternal Parent for Oil Content in Oilseed Rape (brassica Napus L.)

SIMULATION AND EXPERIMENT ON THE PROCESS OF CASTOR SHELLING BASED ON DISCRETE ELEMENT METHOD

Research on the castor oil pressing extraction mechanism based on multi-physics coupling simulation

Compressive mechanical properties of cottonseed

Physical and physiological quality of Jatropha curcas L. seeds at different maturity stages using image analysis

Research on Mechanical–Structural and Oil Yield Properties during Xanthoceras sorbifolium Seed Oil Extraction

Research on Structural–Mechanical Properties during the Castor Episperm Breaking Process

Study on the Mechanical Properties and the Way of Breaking the Shell of Fresh Camellia oleifera Fruit

A Technical Analysis of Solid Recovered Fuel from Torrefied Jatropha Seed Residue via a Two-Stage Mechanical Screw Press and Solvent Extraction Process

Vortex-assisted Solid-Liquid Extraction for Rapid Screening of Oil Content in Jatropha Seed: an Alternative to the Modified Soxhlet Method

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Response surface optimization of the bio-oil yield from Jatropha gossypiifolia L. seeds through ultrasonic-assisted solvent extraction

Optimization Of Ultrasound-Assisted Extraction Of Natural Antioxidants From The Flower Of Jatropha Integerrima By Response Surface Methodology

Design and Key Parameter Optimization of Conic Roller Shelling Device Based on Walnut Moisture-Regulating Treatments

Research and Development of Natural Vegetable Insulating Oil Based on Jatropha curcas Seed Oil

Recent Studies in Mechanical Properties of Selected Hard-Shelled Seeds: A Review

Study on the mechanism of auto-oxidation of Jatropha biodiesel and the oxidative cleavage of C C bond

Experimental Investigation on the Evaporation and Micro-Explosion Mechanism of Jatropha Vegetable Oil (JVO) Droplets

Engineering properties of Dioclea reflexa (Hook F.) seed relevant to machine processing and bulk handling

Research on Genetic Variation of Seed Traits of Different Jatropha Curcas Populations in West Panzhihua Area