Effects of Minor Zn Dopants in Sn-10Bi Solder on Interfacial Reaction and Shear Properties of Solder on Ni/Au Surface Finish
Sijin Li,Junxian Zhu,Huiling Zhou,Mingqing Liao,Fengjiang Wang,Jian Chen
DOI: https://doi.org/10.3390/ma17174364
IF: 3.4
2024-09-04
Materials
Abstract:Sn-10Bi low-bismuth-content solder alloy provides a potential alternative to the currently used Sn-Ag-Cu series due to its lower cost, excellent ductility, and strengthening resulting from the Bi solid solution and precipitation. This study primarily investigates the interfacial evolution and shear strength characteristics of Sn-10Bi joints on a Ni/Au surface finish during the as-soldered and subsequent isothermal aging processes. To improve the joint performance, a 0.2 or 0.5 wt.% dopant of Zn was incorporated into Sn-10Bi solder. The findings demonstrated that a 0.2 or 0.5 wt.% Zn dopant altered the composition of the intermetallic compound (IMC) formed at the interface between the solder and Ni/Au surface finish from Ni3Sn4 to Ni3(Sn, Zn)4. The occurrence of this transformation is attributed to the diffusion of Zn atoms into the Ni3Sn4 lattice, resulting in the substitution of a portion of the Sn atoms by Zn atoms, thereby forming the Ni3(Sn, Zn)4 IMC during the soldering process, which was also verified by calculations based on first principles. Furthermore, a 0.2 or 0.5 wt.% Zn dopant in Sn-10Bi significantly inhibited the Ni3(Sn, Zn)4 growth after both the soldering and thermal aging processes. Zn addition can enhance the shear strength of solder joints irrespective of the as-soldered or aging condition. The fracture mode was determined by the aging durations—with the brittle mode occurring for as-soldered joints, the ductile mode occurring for aged joints after 10 days, and again the brittle mode for joints after 40 days of aging.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering