Abstract:As a new type of environmentally friendly adsorbent, biochar has been increasingly applied in water pollution treatment. Herein, a catalyzed and activated biochar adsorbent (CABC) which was derived from hazelnut shell and modified by FeCl 3 and ZnCl 2 was synthesized successfully. The CABC was applied to remove two typical Pharmaceutical and Personal Products (PPCPs), sulfamethoxazole (SMX) and diclofenac (DCF). The CABC obtained high specific surface area of 1413.02 m 2 /g. The removal rates for SMX and DCF by CABC could reach 97.04 % and 98.65 %, respectively. The adsorption process was consistent with the pseudo-second-order kinetic model and the Langmuir isothermal model, which illustrated that the adsorption process conformed to chemical adsorption and monolayer adsorption. The thermodynamics indicated that the adsorption process was endothermic and could occur spontaneously. After 5 cycles, the CABC still remained a high removal efficiency of 77.7 % and 80.5 % for SMX and DCF, which showed a good reusability. The removal rates of CABC for multiple PPCPs had achieved over 77.7–98.0 %. In different actual wastewater, the removal rates of CABC for SMX and DCF ranged from 56.7 % to 97 %, demonstrating its excellent universality and practical value for utilization. Furthermore, three machine learning models based on Decision Tree, Random Forest and Gradient Boosting Decision Tree algorithm were applied to predict the removal efficiency and determine the relative importance of different influencing factors. The gradient boosting regressor model obtained the best predict performance with R 2 at 0.9806 and 0.9840 for training set and testing set. And the importance analysis had shown that pH was the most important influencing factor with the importance value over 0.35. The adsorption mechanism between CABC and pollutants included pore adsorption, electrostatic interactions, intramolecular hydrogen bonding, the reaction with oxygen-containing functional groups and metal complexation. The prepared biochar adsorbent CABC possessed the potential for PPCPs removing. In addition, the machine learning method can play more and more undeniable role in subsequent water treatment. In future research, machine learning can be used to predict the adsorption performance of materials, enabling targeted design of materials. This will greatly save experimental time and cost losses, and can improve research efficiency.

The Influence of Chlorinated Aromatics’ Structure on Their Adsorption Characteristics on Activated Carbon to Tackle Chemical Spills in Drinking Water Source

Adsorption characteristics of taste and odor compounds IPMP and IBMP by powder activated carbon in aqueous system

Sorption of Perfluorooctane Sulfonate and Perfluorooctanoate on Activated Carbons and Resin: Kinetic and Isotherm Study

Using Powdered Activated Carbon: A Critical Review

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

The Adsorption Selectivity of Short and Long Per- and Polyfluoroalkyl Substances (PFASs) from Surface Water Using Powder-Activated Carbon

The adsorption of biogenetic odorants onto activated carbon: Adsorption characteristics and impacts of algal organic matter

The effectiveness and feasibility of ball-milled powdered activated carbon (BPAC) for removal of organic pesticides in conventional drinking water treatment process

Treatability evaluation of fourteen aldehyde odorants in drinking water by powdered activated carbon: Influence of odorant's properties on adsorption characteristics

Enhanced Removal of Polyfluoroalkyl Substances by Simple Modified Biochar: Adsorption Performance and Theoretical Calculation

A computational study of adsorption on activated carbons containing basic oxygenated surface groups of two priority organochlorine pesticides from water

Disinfection by-product formation and toxicity evaluation for chlorination with powered activated carbon

Exploring the origin of efficient adsorption of poly- and perfluoroalkyl substances in household point-of-use water purifiers: Deep insights from a joint experimental and computational study

Adsorption of five emerging contaminants on activated carbon from aqueous medium: kinetic characteristics and computational modeling for plausible mechanism

Adsorption Characteristics of Chloramphenicol Onto Powdered Activated Carbon and Its Desorption Performance by Ultrasound

Adsorptive removal of PPCPs from aqueous solution using carbon-based composites: A review

Risk-based public health impact assessment for drinking water contamination emergencies

Effectively removal of PPCPs by catalytic activated biochar derived from hazelnut shell: Modeled and predicted by machine learning

Kinetic and equilibrium studies of simultaneous adsorption of monochlorophenols and chlorophenoxy herbicides on activated carbon

A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities

Sorption of per- and poly-fluoroalkyl substances and their precursors on activated carbon under realistic drinking water conditions: Insights into sorbent variability and PFAS structural effects