Sweep Injection Tool Effects on Soil Surface Profile, Manure Exposure and Odor Emission

Shafiqur Rahman,Ying Chen,Qiang Zhang,David A. Lobb
DOI: https://doi.org/10.13031/2013.16783
2004-01-01
Abstract:Soil surface profile study was conducted in an indoor soil bin with three sweeps tools at three injection depths, two tool forward speeds, and two soil moisture contents. The surface profile was measured with the laser profiling system and characterized by the zone depth, zone opening, and height of soil cover. Manure exposure study was conducted with one commercially available injection unit (consisted of 13 sweeps) in a clay soil at three application rates and two injection depths. The line-transects and image analysis methods were used to quantify manure exposure to the air. A wind tunnel and vacuum pump were used to collect odorous air samples in Tedlar bags and odor concentration was determined by a dynamic dilution Olfactometer. Significant differences in the soil profile characteristics were observed between treatments. Increased injection depth increased the zone depth and zone opening however, decreased the manure exposure index, indicating better tool performance at greater injection depth. Although, increased tool speed and soil moisture increased the zone depth and zone opening, but decreasedthe soil covering. This highlighted the potential of manure exposure at high speed and moisture content. Both application rate and injection depth had significant effects on manure exposure. As the application rate increased from 28 to 56 and 56 to 112 m3 ha-1, manure exposure increased by 50 and 87%, respectively. In contrast, as the injection depth increased from 50 to 150 mm, manure exposure decreased by 25%. Odor emissions increased significantly with injection depth, but not with application rate.
What problem does this paper attempt to address?