Study on damage evolution and radon exhalation of uranium-bearing granite under high temperature
Yuying Hao,Fuliang Jiang,Biao Tan,Chao Zhang,Mian Zhang,Haoyu Li,Xiaotong Yang,Yixiang Mo,Tao Hu,Shiyan Li,Huiting He
DOI: https://doi.org/10.1007/s11356-022-24740-9
Abstract:Deep geological disposal of high-level radioactive waste is a feasible method for solving the problem of spent fuel storage in China. High-level radioactive waste releases heat during the decay process, which increases the temperature of the surrounding rock in the repository, resulting in a significant increase in radon concentration. In this study, the surrounding rock (granite) of a high-level radioactive waste repository was taken as the research object and, based on the similarity principle, an orthogonal test designed. Similar materials of uranium-containing granite were prepared in the laboratory and the physical and mechanical properties and cumulative radon concentration of granite samples assessed under different temperatures (25, 50, 100, 150, and 200 °C). The results showed that, with increased temperature, the compressive and tensile strengths of samples gradually increased and their pore volume gradually decreased. After heat treatment, the longitudinal wave velocity and thermal conductivity of samples decreased linearly with increased temperature. The radon exhalation rate first increased and then decreased, with the rate reaching a maximum at 100 °C. The radon exhalation rate of single-sided and double-sided samples was 0.00914 and 0.00460 Bq·m-2·s-1, respectively. When the temperature was 25-100 °C, the dominant stage was pore water. The radon exhalation rates of samples were positively correlated with compressive and tensile strengths and negatively correlated with pore volume, longitudinal wave velocity, and thermal conductivity. The temperature of 100-200 °C was range of the dominant stage of pore structure. The conclusions obtained in this study can provide theoretical support for radon reduction and radon control of granite in high temperature environments.