Abstract:To simply and effectively realize the trajectory tracking control of a bionic joint actuated by a single pneumatic artificial muscle (PAM), a cascaded control strategy is proposed based on the robust modeling method. Firstly, the relationship between the input voltage of the proportional directional control valve and the inner driving pressure of PAM is expressed as a nonlinear model analytically. Secondly, the nonlinear relationship between the driving pressure input of PAM and the angular position output of the bionic joint is described as a second-order linear time-invariant model (LTI) accompanied by parametric perturbations, equivalently, and then the parameters of the model are identified by the robust modeling method. Then, a hybrid model is established based on the two models (the nonlinear model and the LTI model) and corresponding to it, a cascaded controller is developed, the outer loop of which is an H-infinite controller for the angular position tracking designed by loop-shaping design procedure (LSDP) and the inner loop is a nonlinear controller based on the feedback linearization theory for the PAM driving pressure control. Finally, the experiment is accomplished within the joint rotation range of 90 degrees and with the working frequency upper bound of 1.25 rad/s. And the joint with the developed cascaded controller tracks given reference trajectories with steady-state errors smaller than 2%. Results show that the trajectory tracking control of a highly nonlinear system is highly efficient using the proposed strategy in the case of relatively low work frequency.

BP Neural Network Tuned PID Controller for Position Tracking of a Pneumatic Artificial Muscle

Bio-inspired Control of a Rehabilitation Robot Actuated by Pneumatic Artificial Muscles

Position Control of a Pneumatic Muscle Actuator Using RBF Neural Network Tuned PID Controller

A New Approach to Modeling and Controlling a Pneumatic Muscle Actuator-Driven Setup Using Back Propagation Neural Networks.

Precision control of piezoelectric actuator using support vector regression nonlinear model and neural networks

Analysis and Control of A Parallel Lower Limb Based on Pneumatic Artificial Muscles

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

Tracking Control Simulation of Pneumatic Muscle Actuator Joint Using Saturated Adaptive Robust Controller

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

High Precision Adaptive Robust Neural Network Control of a Servo Pneumatic System

Pressure Observer Based Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Muscles

Adaptive Robust Posture Control of A 3-Rps Pneumatic Parallel Platform with Unknown Deadzone

Trajectory Tracking Control of the Bionic Joint Actuated by Pneumatic Artificial Muscle Based on Robust Modeling

One Nonlinear PID Control to Improve the Control Performance of a Manipulator Actuated by a Pneumatic Muscle Actuator

Active Neural Network Control for a Wearable Upper Limb Rehabilitation Exoskeleton Robot Driven by Pneumatic Artificial Muscles

Nonparametric Control Algorithms for a Pneumatic Artificial Muscle.

Dynamic Control of Pneumatic Muscle Actuators

Position Control of a Single Pneumatic Artificial Muscle with Hysteresis Compensation Based on Modified Prandtl-Ishlinskii Model.

Nonlinear proportional integral-derivative controlled rehabilitation robotics by neural network

Hybrid Position Tracking Control of a Pneumatic Artificial Muscle

Position Control of A Bio-Inspired Semi-Active Joint with Direct Inverse Hysteresis Modeling and Compensation