Abstract:The Si and Al thermodynamic data and Pitzer interaction parameters (IPs) from THEREDA were re-evaluated to extend the applicability of the database for modeling cementitious systems from low to highly saline environments. This study involved reassessing the standard reference thermodynamic data for Si and Al aqueous species and relevant solids (quartz, gibbsite, boehmite) and producing a new consistent set of polythermal Pitzer interaction parameters for Si and Al species within the oceanic salt system Al–Si–Ca–Mg–Na–K–Cl–SO4–CO3–H2O. Experimental data done for a range of compositions and temperatures were used optimize the interaction parameters and their temperature coefficients. In the absence of data, estimation methods using analogous species or correlations with the SIT aqueous activity model parameters were applied. For Si in acidic to neutral pH regions, interaction parameters for Si(OH)4(aq) were determined from extensive binary and ternary experimental data. The formation constant for the first silicic acid hydrolysis and its temperature dependence were assessed, while the second hydrolysis species required estimation methods due to limited data. Interaction parameters with K+ were estimated, and the effect of Ca and Mg at high pH was accounted for using complexes between Si and alkaline earth metals. At high Si concentrations, polymeric species impact aqueous Si speciation. Due to limited data, selecting the silica tetramer (Si4O8(OH)44–) and its binary IPs sufficed to reproduce amorphous Si solubility data in NaCl solutions. For Al, standard thermodynamic properties of ions, hydrolyzed species, and hydroxide phases were derived using gibbsite solubility measurements. No temperature coefficients were required for interactions in the Al–Cl–H2O system, yielding similar results in ternary and quaternary systems. Complexes between aluminum and sulfate were accounted for by the β(2) interaction parameter. At intermediate pH, few measurements exist to derive IPs for hydrolyzed aluminum species, with only Cl– interactions derived. Al(OH)3(aq) IPs were assumed similar to Si(OH)4(aq). At high pH, extensive gibbsite solubility data enabled consistent IPs for the Na–K–Cl–OH–Al(OH)4 system. Potential IPs with Ca2+ and Mg2+ were not selected due to precipitation of hydrates in cementitious systems and the use complexes instead. Ternary IPs with SO42– and CO32– were estimated using OH– as an analog for Al(OH)4–. This provided satisfactory predictions from gibbsite solubility measurements in Na2CO3 and Na2SO4 solutions. No significant Si and Al interactions were expected in high pH cement system due to the low Si concentration maintained by cement phases like C–S–H or M–S–H precipitation. The updated Pitzer model for Si and Al aqueous speciation was compared with independent data on cement hydrate phases and solutions in moderate concentrations up to 85 °C, showing good performance. Additional testing against salt-rich systems and further investigations are recommended. The fitted, estimated, and fixed parameter values were documented, and the updated dataset was implemented in THEREDA (https://www.thereda.de/) for use in calculations.

Determination of Osmotic Coefficients and Representation with Ion-interaction Model for NaOH-NaAl(OH)_4-H_2O System at 303.15 K

Solubility Determination and Thermodynamic Modeling of Solid–Liquid Equilibria in the Quaternary System NaCl–Na 2 SO 4 –NaHCO 3 –H 2 O at 323.15 K

A conventional, molal-based Pitzer model for the (H+ – Nd3+ – NO3−){aq} system valid to stoichiometric ionic strengths near 40 mol·kg−1 at 298 K and 0.1 MPa

Static and Kinetic Studies of the Adsorption/Desorption of H+ and Oh- Ions on Alumina in Aqueous Nano3 Solution

Experimental Investigation and Thermodynamic Modeling of the Li O–Al O System

Adsorption of H+, OH− and Background Electrolyte Ions on Alumina — Point of Zero Charge, Triple Layer Model (TLM) Parameters and Thermodynamic Parameters

Si–Al Pitzer dataset: Consistent set of Pitzer activity model interaction parameters of Al and Si species, for modelling cements in saline systems with THEREDA

Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Experimental and Thermodynamic Modeling Study of the Quaternary System Containing Lithium, Potassium, Magnesium, and Sulfate at 288.15 K

Dilution enthalpies of the binary systems (LiBO2 + H2O) and (LiB5O8 + H2O) and the ion interactions at 308.15 K

Theoretical and practical investigation of ion–ion association in electrolyte solutions

Density functional theory study and kinetic analysis of the formation mechanism of Al30O8(OH)56(H2O)2618+ (Al30) in aqueous solution

The Effects of NaI, KBr, and KI Salts on the Vapor-Liquid Equilibrium of the H2O+CH3OH System

A theoretical method to calculate the viscosity of NaAlSi 3O 8 melt

Determination and Correlation of Phase Equilibria of Quaternary System KCl–KH2PO4–CO(NH2)2–H2O and Its Ternary Subsystems at 323.15 and 333.15 K

Simultaneous determination of NaOH, Na2CO3 and Al2O3 in sodium aluminate solutions by flow injection titration

Solid–Aqueous Phase Equilibria in the Quaternary NaCl + KCl + RbCl + H 2 O System: Thermodynamic Predictions and Experimental Verifications at 298.15 K

Activity Coefficient and CO2 Solubility Studies of Aqueous Alkyl Ammonium Salts Using Electrolyte PC-SAFT EOS

Activity Coefficients for Nacl in Meoh+H2o by Electromotive Force Measurements at 308.15 K and 318.15 K

Ion-ion interactions enhance aluminum solubility in alkaline suspensions of nano-gibbsite (α-Al(OH)3) with sodium nitrite/nitrate

Density functional studies of the structural characteristics, 27Al NMR chemical shifts and water-exchange reactions of Al30O8(OH)56(H2O)2618+(Al30) in aqueous solution