Abstract:A high-quality X-ray source was proposed by modifying the target material structure characteristics driven by ultrahigh laser energy. The experiments were performed on the Ti:sapphire femtosecond laser beam device (4.3–6 J, 30 fs), one of the three XG-III lasers in Laser Fusion Research Center of China Academy of Engineering Physics. The femtosecond laser beam drove the nanowire copper material with an average length of 18–50 μm and a diameter of about 260 nm. A single-photon counting charge-coupled device was employed to measure the copper Kα X-ray emission of the nanowire and foil targets. A clear maximum photon yield of the nanowire target was calculated to be 3.6 × 108 photons sr–1 s–1, the conversion efficiency was up to 0.0087%, and the average yield was 2.5 times that of the copper foil targets. In addition, by using a pinhole imaging method of φ10 μm, the minimum full width at half maximum spot size of the X-ray source was calculated in the range of 85–240 μm, which was similar to that of the copper foil material with a long radius of 170 μm and a short radius of 63 μm. The experimental data illustrate that the nanowire has the potential to enhance the energy absorption of femtosecond laser for X-ray conversion and backlight imaging.This article has not yet been cited by other publications.

Radiography of a Kα X-ray Source Generated Through Ultrahigh Picosecond Laser–nanostructure Target Interaction

X-Ray Source Produced by Laser Solid Target Interaction at Khz Repetition Rate

Kα X-ray Emission from Nanowire Cu Targets Driven by Femtosecond Laser Pulses for X-ray Conversion and Backlight Imaging

Design of a Compact Electron Radiography System with Electron Source from Laser Wakefield Accelerator

High-Resolution X-Ray Backlight Radiography Using Picosecond Petawatt Laser

Picosecond laser-driven coded-source radiography with high resolution and contrast

Micro-size Picosecond-Duration Fast Neutron Source Driven by a Laser-Plasma Wakefield Electron Accelerator

High Contrast Femtosecond Laser-Driven Intense Hard X-Ray Source for Imaging Application

Experimental Investigations of Hard X-Ray Source Produced by Picosecond Laser-Irradiated Solid Target

Micro-spot Gamma-Ray Generation Based on Laser Wakefield Acceleration

Ultra-Bright, Ultra-Broadband Hard X-Ray Driven by Laser-Produced Energetic Electron Beams

Efficient multi-keV x-ray source generated by nanosecond laser pulse irradiated multi-layer thin foils target

Lateral propagation of fast electrons at the laser-irradiated target surfaces

High-flux X-Ray Photon Emission by a Superluminal Hybrid Electromagnetic Mode of Intense Laser in a Plasma Waveguide

Intense High-Contrast Femtosecond K-Shell X-Ray Source from Laser-Driven Ar Clusters

Note: Diagnosing Femtosecond Laser-Solid Interactions with Monochromatic Kα Imager and X-Ray Pinhole Camera.

X-Ray Source Generation under Laser-Ar Cluster Interaction

Production of Bright High-Energy X-rays Based on Interaction Oflaser and Near-Critical-density Plasma

Design of A Source to Supply Ultra-Fast Electron and X-Ray Pulses

A Sort of Pulsed Mircofocal X-Ray Source

High-energy Radiography of Dense Material with High Flux Inverse-Compton X-Ray Source (conference Presentation)