Abstract:Two-stage AC-DC converters are considered as a prominent solution for DC-type electric vehicle (EV) chargers. However, this kind of architecture suffers from high switching losses with large heatsink and DC-link capacitor volume. To relieve this issue, this paper presents a new hybrid modulation for DC-type EV chargers, where a two-phase clamped discontinuous pulse-width-modulation (DPWM) in the front-end circuit is cooperated with the variable frequency triangular-current-mode (TCM) zero voltage switching (ZVS) or its simplified implementation, i.e., boundary-ZVS (B-ZVS) strategy, in the back-end circuit. The former can stop the switching actions in the front-end stage during two-thirds of the grid period, while the AC currents are at their highest values, which can yield to the best switching loss reduction and deliver high power factor operation. Besides, TCM-ZVS or B-ZVS modulations can achieve ZVS turn-on action for all semiconductors during all operating range in the DC-DC stage to further reduce the power losses on the semiconductors. With such characteristics, the proposed strategies can reduce the switching losses of the system to the best extent, and thus allow an enhancement of the system power density by improving the power conversion efficiency. The proposed strategy is described, analyzed, validated, and benchmarked in a 5 kW SMD SiC MOSFET-based two-stage AC-DC converter. A 99 power efficiency can be achieved with the solution implementing the TCM-ZVS strategy at an output voltage of 400 V and rated power.

A carrier modulation method for minimizing the dc link capacitor current ripple of the HEV DC-DC converter and inverter systems

Theoretical analysis of DC link capacitor current ripple reduction in the HEV DC-DC converter and inverter system using a carrier modulation method

Minimizing DC Capacitor Current Ripple and DC Capacitance Requirement of the HEV Converter/inverter Systems

An Improved Modulation Strategy for the Active Voltage Clamping HERIC Inverter

A new approach for suppressing DC voltage ripples of MMC-HVDC

DC-Link Capacitor Current Stress Minimization Strategy for Paralleled Three-Phase Voltage-Source Converters with Interleaving

Capacitor Voltage Ripple Reduction of A 4-Level Hybrid Clamped Converter Using Switching State Redundancy for Medium-Voltage Drive

A Pwm Coordination Strategy to Reduce Dc-Link Capacitor Dependence in Converter-Inverter Systems

Control and Modulation of a Single-Phase AC/DC Converter with Smooth Bidirectional Mode Switching and Symmetrical Decoupling Voltage Compensation

Topology and Hybrid Modulation of Six-Level Switched-Capacitor HC Converter With Improved DC-Link Capacitor Voltage Balancing

Optimal Modulation Strategy for Ripple Current Reduction of DC-link Capacitor in Multi-drive Systems

Output Voltage Ripple Suppression Strategy for Light DC-link Capacitor DC-Type EV Charger

Minimizing DC Capacitance Requirement of Cascadeded H-bridge Multilevel Inverters for Photovoltaic Systems by 3rd Harmonic Injection

Optimization-Based Capacitor Balancing Method with Selective DC Current Ripple Reduction for CHB Converters

Strategy and Application of Reducing Capacitor Voltage Ripples in Modular Multilevel Converters

A Modulation Scheme to Reduce Leakage Current of Split-Capacitor Four-Wire Current Source Inverter

Modified Modular Multilevel Converter to Reduce Submodule Capacitor Voltage Ripples Without Common-Mode Voltage Injected

A control method for the matrix converter based on virtual AC/DC/AC conversion using carrier comparison method

A Hybrid Modulation Featuring Two-Phase Clamped Discontinuous PWM and Zero Voltage Switching for 99% Efficient DC-Type EV Charger

A Multi-Carrier Pulse Width Modulator for the Auxiliary Converter and the Diode Rectifier

Unified Modeling and Control Methods for Ripple Power Decoupling Circuit Based on DC-Split Capacitor