Abstract:Abstract This paper discusses the Integrated Role of Geomechanics and Drilling Fluids Design for drilling a well oriented towards the minimum horizontal stress direction in a depleted, yet highly stressed and complex clastic reservoir. There are multiple challenges related to such a well that need to be addressed during the planning phase. In this case, the well needs to be drilled towards the minimum horizontal stress direction (Shmin) to benefit multi-stage hydraulic fracturing. At the same time, the most prominent challenge is that this well orientation is more prone to wellbore failure and requires a maximum mud weight, due to the present strike slip stress environment. Well planning challenges in such an environment include (a) the determination of formation characteristics and rock properties, (b) the anticipation of higher formation collapse pressure during the course of drilling the lateral section within the reservoir, (c) the determination of the upper bound mud weight to prevent lost circulation due to a low fracture gradient against depleted sections, or due to the presence of pre-existing natural fractures, d) mitigating the higher risk of differential sticking against depleted porous layers, and determining appropriate bridging in the drilling fluids, (e) recognizing the prolonged exposure time of the formation due to the length of the lateral and the lower rate of penetration against the tight highly dense formations. For successful drilling, and to mitigate the above risks, the first step is to prepare a predrill GeoMechanical model along with adequate fluid design and drillers action plans to be considered during drilling. Offset well petrophysical logs and core data are considered for the preparation of the predrill GeoMechanical model, along with the drilling experiences in the offset locations. Based on the above, a predrill GeoMechanical model is prepared, a risk matrix is being established, and a representative mud weight window is recommended (Wellbore Stability Analysis). In most cases, the offset well locations considered are vertical- or inclined-, or lateral wells of different trajectory azimuth than the target well location and the predrill GeoMechanical model can incorporate such variations easily; however, any Geology uncertainty, leading to a different rock property- and stress set-up (or even different pore pressure than expected), at the actual well location will be part of the uncertainty of the predrill GeoMechanical model and Wellbore Stability Analysis. This is where the real time monitoring is playing out its full potential: giving an updated model and wellbore stability analysis during drilling. While drilling the lateral section, the wellbore condition is being monitored using LWD (logging while drilling) tools, e.g. Gamma Ray, Density, Neutron, Acoustic Caliper, Azimuthal density image and ECD (equivalent circulating density). While gamma ray helps in determining the lithology, density logs help to understand the formation hardness, and they can be used to generate a calibrated pseudo acoustic log. Based on this pseudo acoustic log, the rock strength and other rock mechanical properties of the pre- GeoMechanical model can be updated as soon as they become available. This gives insight into the model differences and helps to understand model variations and adjust Wellbore Stability recommendations accordingly. While the neutron log helps to determine the zones of high porosity, and thus potential risk zones for differential sticking, the azimuthal density image clearly indicates the breakout zones caused by the shear failure of the wellbore. The presence of wellbore failure (breakout) is further confirmed by acoustic caliper data, and accordingly wellbore stability related recommendations are communicated to the operator, for an increase in the specific gravity of the mud, and thus, to balance the wellbore. From a mud rheology perspective, high performance OBM (oil-based mud) parameters are maintained consistent with the formation properties, to minimize fluid loss, optimize wellbore strengthening characteristics and minimize at the same time solids concentrations in order to avoid excessive ECD (equivalent circulating density) which may open pre-existing natural fractures resulting in downhole losses and in consequence might lead to differential sticking. In the case study presented herein, the proactive implementation of GeoMechanics and its Wellbore Stability application as well as the integration of drilling fluids services, resulted in the smooth and successful drilling of the lateral section, and also in the delivery of an in gauge hole necessary for multi-stage fracturing (MSF) completion optimization.

Optimization of Well Trajectory under Uncertainty for Proactive Geosteering

Ensemble-Based Well Log Interpretation and Uncertainty Quantification for Geosteering

Efficient Ensemble-Based Closed-Loop Production Optimization

High-Precision Geosteering via Reinforcement Learning and Particle Filters

Adaptive Global Optimization of Real-Time Boundary Detection From the LWD Azimuthal Electromagnetic Measurements in Layered TI Formation With Arbitrarily Deviated Borehole

Proactive Decision-Making Through Real-Time Geomechanical Support Leveraging Drilling a Long Horizontal Section Through a Tight Unconventional Reservoir of an Oil and Gas Field: Middle East

Automatic Optimization of Multi-Well Multi-Stage Fracturing Treatments Combining Geomechanical Simulation, Reservoir Simulation and Intelligent Algorithm

Artificial Intelligence for Infill Well Placement and Design Optimization in Multi-layered/stacked Reservoirs Under Subsurface Uncertainty

Real-time forward modeling and inversion of logging-while-drilling electromagnetic measurements in horizontal wells

Real Time Cloud-Based Automation for Formation Evaluation Optimization, Risk Mitigation and Decarbonization

A simultaneous perturbation stochastic approximation algorithm for coupled well placement and control optimization under geologic uncertainty

A New Workflow for Estimating Reservoir Properties With Gradient Boosting Model and Joint Inversion Using MWD Measurements

Deep learning for prediction of complex geology ahead of drilling

Ensemble-based optimization of hydraulically fractured horizontal well placement in shale gas reservoir through Hough transform parameterization

Optimizing Horizontal Well Geosteering and Reservoir Evaluation in Complex Marginal Oil Field with Ultra-Deep Reservoir Mapping and Ultra-High-Definition Multilayer Mapping-While-Drilling Technologies

Efficient Optimization: Unveiling the Application of Ensemble Learning Combined with the CMA-ES Algorithm in Hydraulic Fracturing Design

Weighted mapping of productivity potential based on simulated annealing algorithm for well placement optimization

Robust Optimization under Geological Uncertainty Using a TransUNet-Based Surrogate Model with EnOpt Algorithm

Diversity Dependent Uncertainty Management for Hydrocarbon Stimulation in Uncertain Heterogeneous Reservoir with Improved Efficiency

Derivative-free trust region optimization for robust well control under geological uncertainty

Probabilistic forecasting for geosteering in fluvial successions using a generative adversarial network