Abstract:The high-precision modeling and collision simulation of UAVs should be conducted to achieve the dynamic response of UAV and assess UAV safety. In this paper, a high-precision finite element model of small rotor logistics UAVs on the market was built in LS-DYNA. The process to model the connection structure between a range of parts of a UAV was elucidated in detail. The bolt, damping spring and rivet & thread were respectively simulated with “NRB + beam”, “NRB + discrete” and “spot weld”. By a series of static and dynamic material tests, the constitutive parameters of main materials of UAV structure were determined. Besides, a reasonable explicit time step was set by regulating the mass scaling of local elements. To verify whether the finite element model of UAV is accurate, UAV underwent a developed full-scale crash test. As revealed from the experimentally achieved results, the trend of impact load over time in collision simulation significantly complied with the experimentally achieved results, and the discrepancy between the maximum impact load peak and the experimentally achieved results only took up 6.54%. Moreover, the vital damaged parts, damaging process and failure mode of the UAV structure in the crash test were accurately characterized in the collision simulation. Thus, the UAV modeling and collision simulation was verified to exhibit feasibility. Lastly, with the verified UAV high-precision model, the impacting process, possible damaged parts and failure modes of UAV at the variety of angles and speeds were assessed. Accordingly, the proposed high-precision modeling and collision simulation of small rotor UAV is capable of saving the physical and time resources of UAV structural strength experiments, as well as effectively assessing the structural safety and improving the design of small rotor UAVs.

Modeling And Simulation Research On Tailless Unmanned Aerial Vehicle

Modeling Andsimulation Research Ontailless UnmannedAerialVehicleI

Research and Design for a Flight Simulation System Based on VxWorks

Modeling and Simulation Research on Advanced Short Takeoff and Vertical Landing Aircraft

Modeling and simulation research of missile with morphing wings

Modeling and Hover Control of a Dual-Rotor Tail-Sitter Unmanned Aircraft.

Modeling and Simulation for Multi-Rotor Fixed-Wing UAV Based on Multibody Dynamics

Model and longitudinal hover control of a conceptual thrust-vectored unmanned tail-sitter

Modeling and Control of a Quadrotor Tail-Sitter Unmanned Aerial Vehicles

High-precision Modeling and Collision Simulation of Small Rotor UAV

UAV Simulator-Based Simulation of Flight Control System

Transition Flight Control and Simulation of a Novel Tail-Sitter UAV with Varying Fuselage Shape

Integrated Flight Dynamics Modelling for Unmanned Aerial Vehicles

Multi-body Dynamic Modeling, Simulation and Control Strategy Design of a Y6 Tilt Rotor UAV

Modeling and Hover Attitude Control of Tail-Sitter Aircraft

Design and Implementation of a Hardware-in-the-loop Simulation Platform for a Tail-Sitter UAV

An Unmanned Aerial Vehicle Simulation System with JTIDS Interface

Autonomous Flight Control Laws Design for a Tailless Flying-wing Unmanned Aerial Vehicle

Automatic Control and Model Verification for a Small Aileron-Less Hand-Launched Solar-Powered Unmanned Aerial Vehicle

Aerodynamic Analysis for the Mathematical Model of a Dual-System UAV

Mathematical Modeling and Control of A Tiltrotor Uav