Abstract:In-situ polymerization of polymers with cement can greatly improve the engineering performances of cementitious composites, the structural mechanisms, however, remain still not fully established. Herein in-situ polymerization modified cementitious composites (iPMCC) with sodium acrylate (SA) in different dosages (0%, 4% and 8%) were fabricated. Flowability, strength, deformability, and water sorptivity of the iPMCCs were tested, and the multi-scale structures in terms of pore size distribution, microscopic morphology, chemical characteristics, and solid structure of calcium-silicate (-aluminate)-hydrates were characterized. Results demonstrate that, compared with neat cement paste, the iPMCC with 4% SA showed the improvement of flowability by 35.1%, the increases of flexural and compressive strength by 109.0% and 11.8%, the rises of flexural and compressive deformation energy by 458.8% and 161.0%, and the decrease of water sorptivity by 19.1%. The in-situ SA polymerizations lead to substantial pore refinement, but macro defects in the iPMCC with 8% SA. Cross-linked sodium polyacrylate networks formed in the cement matrix and interacted with the cement hydrates, accounting for the improved strength, deformability, and water resistance. Cement hydration depression by polymers was evidently supported by the NMR data. The findings would deepen the understandings of multi-scale structure of cementitious composites with polymers, enabling development of highly ductile and durable construction materials.

Synthesis and characterization of poly-aluminum silicate sulphate (PASS) for ultra-low density fiberboard (ULDF)

Optimizing Preparation Conditions of Ultra-Low-Density Fiberboard by Response Surface Methodology

Modification of Ultra-Low Density Fiberboards by an Inorganic Film Formed by Si-Al Deposition and Their Mechanical Properties

Hybrid Composites of Polyvinyl Alcohol (pva)/si–al for Improving the Properties of Ultra-Low Density Fiberboard (ULDF)

Effect of Si–Al Molar Ratio on Microstructure and Mechanical Properties of Ultra-Low Density Fiberboard

Effect of Silica Sol Content on Thermostability and Mechanical Properties of Ultra-low Density Fiberboards

Fabrication of Homogeneous Mullite-Based Fiber Porous Ceramics with High Strength and Porosity

Effect of Boron-Zinc-Aluminum-Silicium Compounds on the Fire Performance of Ultra-Low Density Fiberboards (Uldfs)

Effect of Si-Al Compounds on Fire Properties of Ultra-Low Density Fiberboard

Mesoporous Aluminosilicate Material with Hierarchical Porosity for Ultralow Density Wood Fiber Composite (Uld_wfc)

Ultra-Low Density Fibreboard with Improved Fire Retardance and Thermal Stability Using a Novel Fire-Resistant Adhesive

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Optimization for Fire Performance of Ultra-low Density Fiberboards Using Response Surface Methodology

Construction of porous poly (aryl sulfide sulfone) film with low dielectric constant and excellent mechanical property

Improve the Interfacial Properties Between Poly(arylene Sulfide Sulfone) and Carbon Fiber by Double Polymeric Grafted Layers Designed on a Carbon Fiber Surface

Preparation and Mechanical Properties of Poly (arylene Sulfide Sulfone)/glass Fiber Cloth Composites

One-pot Synthesis and Characterization of Poly(meta-aryl sulfide sulfone imide imide)

Improvement of interfacial interaction between poly(arylene sulfide sulfone) and carbon fiber via molecular chain grafting

Microstructure of Burned Ultra-Low-Density Fiberboards Using Plant Fiber As the Matrix and Si-Al Compounds As the Filler

Effects of Polyarylene Sulfide Sulfone on the Mechanical Properties of Glass Fiber Cloth-Reinforced Polyphenylene Sulfide Composites

Enhanced Mechanical Properties of Poly(arylene Sulfide Sulfone)membrane by Co-electrospinning with Poly(m-xylene Adipamide)